Canada Spends Logo

Explore our Budget 2026 analysis

Grant: Engage Grants Program

Concordia University

$25,000.00

Identification of oil-sludge interface using a numerical vibro acoustic approach

FY 2011-12

Summary
This research project in collaboration with INENCO is aiming at developing a tool to determine the sludge profile that is accumulated in large oil storage tanks. Currently, INENCO is interested in determining the sludge levels that are accumulated in large oil storage tanks. In practice, 5 to 15 feet of sludge is accumulated inside the tank where the sludge level is low near the outlet nozzle and much higher at the far end of the tank opposite the outlet nozzle. The tank height is typically around 40 to 45 feet and consists of a floating roof, which when lowered will have contact with the non-uniform distribution of the sludge inside the tank and can increase the risk of damage to the roofs which is very costly. Consequently, operation is usually kept at high crude oil levels to avoid floating roof failure. However, this will result in loss of storage capacity and thus, a big loss in production. Knowing the sludge profile levels inside the tanks will not only maximize the storage capacity inside the tanks, but also reduce the cost of production while at the same time, reducing the risk of damage to the floating roofs. The method proposed is based on vibro-acoustics, where by assuming that the wave propagation solution in a tank is unique to a specific interface location, we want to develop a tool that provides this surface location. Therefore, a shape parameterization will be utilized in order to define a unique shape with a limit number of parameters. Randomly generated shapes can be produced by selecting random values of the parameters. For each oil and sludge interface level, the geometry will be meshed and a numerical computation of the wave propagation problem modeled by the Helmholtz equation in the frequency domain for the heterogeneous media is then performed. The numerical results will yield the approximate pressure fluctuations in the domain which includes both the sludge and oil. The solution to each randomly generated shape will be simplified into a relation between the wave properties at a fixed point and the values of the shape parameters. A large set of simulation will be performed to generate a neural network that given the wave properties at a few points and outputs the parameters that define the shape.
Program
Engage Grants Program
Location
Quebec, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data

As published

Application id
418076-2011
Name nom
Paraschivoiu, Marius
Department département
Engineering and Computer Science, Faculty of
Organization id
70
Institution établissement
Concordia University
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2011
Competition year année de concours
2011
Award amount
25000
Program id
EGP
Program nane en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1552
Committee name en
Quebec Internal Decision Committee
Committee name fr
Comité de décision interne pour le Québec
Area of application code
305
Area of application group en
Energy resources
Area of application group fr
Ressources d'énergie
Area of application en
Energy storage and conversion
Area of application fr
Stockage et transformation de l'énergie
Research subject code
2302
Research subject group en
Fuel and energy technology
Research subject group fr
Combustibles et technologie de l'énergie
Research subject en
Petroleum engineering, oil and gas recovery
Research subject fr
Génie du pétrole, récupération du pétrole et du gaz
Partie
1
Nb partie
1
Application title
Identification of oil-sludge interface using a numerical vibro acoustic approach
Keyword
NSERC
Application summary
This research project in collaboration with INENCO is aiming at developing a tool to determine the sludge profile that is accumulated in large oil storage tanks. Currently, INENCO is interested in determining the sludge levels that are accumulated in large oil storage tanks. In practice, 5 to 15 feet of sludge is accumulated inside the tank where the sludge level is low near the outlet nozzle and much higher at the far end of the tank opposite the outlet nozzle. The tank height is typically around 40 to 45 feet and consists of a floating roof, which when lowered will have contact with the non-uniform distribution of the sludge inside the tank and can increase the risk of damage to the roofs which is very costly. Consequently, operation is usually kept at high crude oil levels to avoid floating roof failure. However, this will result in loss of storage capacity and thus, a big loss in production. Knowing the sludge profile levels inside the tanks will not only maximize the storage capacity inside the tanks, but also reduce the cost of production while at the same time, reducing the risk of damage to the floating roofs. The method proposed is based on vibro-acoustics, where by assuming that the wave propagation solution in a tank is unique to a specific interface location, we want to develop a tool that provides this surface location. Therefore, a shape parameterization will be utilized in order to define a unique shape with a limit number of parameters. Randomly generated shapes can be produced by selecting random values of the parameters. For each oil and sludge interface level, the geometry will be meshed and a numerical computation of the wave propagation problem modeled by the Helmholtz equation in the frequency domain for the heterogeneous media is then performed. The numerical results will yield the approximate pressure fluctuations in the domain which includes both the sludge and oil. The solution to each randomly generated shape will be simplified into a relation between the wave properties at a fixed point and the values of the shape parameters. A large set of simulation will be performed to generate a neural network that given the wave properties at a few points and outputs the parameters that define the shape.
Concordia University - $25,000 Grant (2011-12) | Canada Spends