Grant: Alliance Grants
University of Toronto
$25,000.00
Development of a bench-scale liquid metal wiping pilot system for understanding and optimizing the jet wiping process during hot dip galvanizing
FY 2024-25
Summary
In the case of hot-dip galvanizing, a continuously-moving steel strip is coated with a thin layer of zinc in order
to resist to oxidization. The protective metal is applied in its liquid state, by dipping the substrate into a bath of
coating. However, at common strip speeds, the liquid layer dragged by the moving web is far too thick and
uneven for the applications considered. The final coating thickness is therefore controlled by an air knife,
which impinges a two-dimensional high-speed gas jet on the liquid layer. The forces imposed in the liquid by
the air knife jet results in the formation of a runback flow down to the bath, leaving a more uniform and
constant coating thickness dowsntream on the substrate. Nevertheless, operational constraints and process
parameter variation can still result in significant coating non-uniformity and excess zinc consumption. This
research program will focus on developing a bench scale galvanizing pilot where a low melting point liquid
metal will be used as an analogue to zinc and a rotating belt arrangement will be combined with an air knife to
visualize the jet wiping process in more detail. State of the art imaging techniques developed at the applicant's
laboratory will be used to visualize the wiping process, coating waviness and solution strategies will be
proposed for optimizing the wiping system in terms of process parameters and air knife design. With many
existing problems at the hot dip galvanizing lines it is difficult to meet the market demands. The results of this
project are expected to help galvanized strip producers like AM Dofasco to determine, and control the
optimum coating properties that will allow them obtaining the highest productivity and simultaneously achieve
high quality strips with desired product quality. Proper understanding of the jet wiping process and its
influence on galvanized product quality has profound impacts on the commercial aspects of hot dip
galvanizing. Based on the current interests in this process optimization, and enhanced productivity (expressed
by AM Dofasco hot dip galvanizing lines), an economic impact of $6 million /year is expected from the results
of this research, which translates to $30 million within five years after completion of this project
Program
Alliance Grants
Recipient
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
565310-2021
Name nom
Barati, Mansoor M
Department département
Materials Science and Engineering
Organization id
31
Institution établissement
University of Toronto
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2024
Competition year année de concours
2021
Award amount
25000
Program id
ALLRP
Program name en
Alliance Grants
Program name fr
Subventions Alliance
Group en
RESEARCH PARTNERSHIPS
Group fr
PARTENARIATS DE RECHERCHE
Committee code
96
Committee name en
RPP Internal Decision Cttee
Committee name fr
Cté de décision interne - PPR
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2000
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials science and technology
Research subject fr
Science et technologie des matériaux
Field of research list names en
Not available
Field of research list names fr
Non disponible
Socioeconomic objective list names en
Not available
Socioeconomic objective list names fr
Non disponible
Application title
Development of a bench-scale liquid metal wiping pilot system for understanding and optimizing the jet wiping process during hot dip galvanizing
Keywords
air knife; galvanizing; imaging; jet wiping; physical modeling; visualization
Application summary
In the case of hot-dip galvanizing, a continuously-moving steel strip is coated with a thin layer of zinc in order
to resist to oxidization. The protective metal is applied in its liquid state, by dipping the substrate into a bath of
coating. However, at common strip speeds, the liquid layer dragged by the moving web is far too thick and
uneven for the applications considered. The final coating thickness is therefore controlled by an air knife,
which impinges a two-dimensional high-speed gas jet on the liquid layer. The forces imposed in the liquid by
the air knife jet results in the formation of a runback flow down to the bath, leaving a more uniform and
constant coating thickness dowsntream on the substrate. Nevertheless, operational constraints and process
parameter variation can still result in significant coating non-uniformity and excess zinc consumption. This
research program will focus on developing a bench scale galvanizing pilot where a low melting point liquid
metal will be used as an analogue to zinc and a rotating belt arrangement will be combined with an air knife to
visualize the jet wiping process in more detail. State of the art imaging techniques developed at the applicant's
laboratory will be used to visualize the wiping process, coating waviness and solution strategies will be
proposed for optimizing the wiping system in terms of process parameters and air knife design. With many
existing problems at the hot dip galvanizing lines it is difficult to meet the market demands. The results of this
project are expected to help galvanized strip producers like AM Dofasco to determine, and control the
optimum coating properties that will allow them obtaining the highest productivity and simultaneously achieve
high quality strips with desired product quality. Proper understanding of the jet wiping process and its
influence on galvanized product quality has profound impacts on the commercial aspects of hot dip
galvanizing. Based on the current interests in this process optimization, and enhanced productivity (expressed
by AM Dofasco hot dip galvanizing lines), an economic impact of $6 million /year is expected from the results
of this research, which translates to $30 million within five years after completion of this project