Canada Spends Logo

Explore our Budget 2026 analysis

Grant: Discovery Grants Program - Individual

University of Alberta

$32,000.00

Manufacture of Three Dimensional Architected Nanocomposite Structures for Advanced Battery Electrodes

FY 2024-25

Summary
The drive for advanced energy storage technologies is inevitable in the roadmap for reaching net-zero emissions and transitioning away from fossil fuels, based on Canada's commitments under the COP26 agreement. In pursuit of this goal, batteries are one of the most vital enablers for the green energy transition and are integral building blocks for powering modern society. In Canada and globally, the continuous development of emerging battery chemistries and active materials have nourished ground-breaking advances in manufacturing of high-performance batteries. In addition to the battery chemistries (i.e., active materials), form factors of an electrode can have significant effect on the energy density, power density, and battery life. However, the form factor of battery electrodes has remained unchanged since the first market introduction of the LIBs in 1991. Novel structural design of electrodes without changing the fundamental battery chemistries is highly promising to improve the specific energy/power and lower the battery cost. Therefore, the innovative concepts proposed in this research program can provide novel and advanced electrode manufacturing routes for high energy and power density applications. Storing energy in batteries is governed by the electrochemically active materials in the cathode and anode. Thus, the pivotal principle for novel structural design of electrodes is to maximize the ratio of these active battery materials in electrodes by increasing their thickness. Despite their great potentials, the realisation of thick 3D electrode is impeded by several fundamental challenges such as slow ion diffusion and high electrical resistance through the thickness of electrodes. This research program proposes a radically new method to develop and to mass produce ultrathick battery electrodes with high areal capacity and high-capacity retention during cycling. In this approach, the concept of three dimensional (3D) porous interpenetrating battery electrodes with low tortuosity will be utilized to improve the electron and ion transport rate in the ultrathick 3D electrodes. The novel 3D architected electrodes will be enabled by adding new active polymer agents to the battery slurry, which will allow for the formation of in-situ porosity and 3D structures using a continuous Roll-to-Roll (R2R) hot embossing process. Further, part of this research program will focus on the development of 3D vertically aligned carbon nanotube (CNT) forests with precise control on CNT forests height, patterns and nanopores for production of interdigitated microbatteries. Because of these unique performance features and the capability to fabricate the proposed ultrathick battery electrodes via a scalable process (i.e., R2R), it is anticipated that this project will be highly attractive to both academic and industrial researchers and will address the growing needs for high performance batteries to support the Canadian industrial stakeholders.
Program
Discovery Grants Program - Individual
Location
Alberta, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data

As published

Application id
RGPIN-2023-03994
Name nom
Hamidinejad, Mahdi
Department département
Mechanical Engineering
Organization id
9
Institution établissement
University of Alberta
Province en
Alberta
Province fr
Alberta
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2024
Competition year année de concours
2023
Award amount
32000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
DISCOVERY RESEARCH
Group fr
RECHERCHE AXÉE SUR LA DÉCOUVERTE
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
1208
Area of application group en
Advancement of knowledge
Area of application group fr
Avancement des connaissances
Area of application en
Materials sciences
Area of application fr
Sciences des matériaux
Research subject code
2000
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials science and technology
Research subject fr
Science et technologie des matériaux
Field of research list names en
Not available
Field of research list names fr
Non disponible
Socioeconomic objective list names en
Not available
Socioeconomic objective list names fr
Non disponible
Application title
Manufacture of Three Dimensional Architected Nanocomposite Structures for Advanced Battery Electrodes
Keywords
advanced manufacturing; nanomanufacturing; nanocomposites; architected materials; energy storage materials; battery materials
Application summary
The drive for advanced energy storage technologies is inevitable in the roadmap for reaching net-zero emissions and transitioning away from fossil fuels, based on Canada's commitments under the COP26 agreement. In pursuit of this goal, batteries are one of the most vital enablers for the green energy transition and are integral building blocks for powering modern society. In Canada and globally, the continuous development of emerging battery chemistries and active materials have nourished ground-breaking advances in manufacturing of high-performance batteries. In addition to the battery chemistries (i.e., active materials), form factors of an electrode can have significant effect on the energy density, power density, and battery life. However, the form factor of battery electrodes has remained unchanged since the first market introduction of the LIBs in 1991. Novel structural design of electrodes without changing the fundamental battery chemistries is highly promising to improve the specific energy/power and lower the battery cost. Therefore, the innovative concepts proposed in this research program can provide novel and advanced electrode manufacturing routes for high energy and power density applications. Storing energy in batteries is governed by the electrochemically active materials in the cathode and anode. Thus, the pivotal principle for novel structural design of electrodes is to maximize the ratio of these active battery materials in electrodes by increasing their thickness. Despite their great potentials, the realisation of thick 3D electrode is impeded by several fundamental challenges such as slow ion diffusion and high electrical resistance through the thickness of electrodes. This research program proposes a radically new method to develop and to mass produce ultrathick battery electrodes with high areal capacity and high-capacity retention during cycling. In this approach, the concept of three dimensional (3D) porous interpenetrating battery electrodes with low tortuosity will be utilized to improve the electron and ion transport rate in the ultrathick 3D electrodes. The novel 3D architected electrodes will be enabled by adding new active polymer agents to the battery slurry, which will allow for the formation of in-situ porosity and 3D structures using a continuous Roll-to-Roll (R2R) hot embossing process. Further, part of this research program will focus on the development of 3D vertically aligned carbon nanotube (CNT) forests with precise control on CNT forests height, patterns and nanopores for production of interdigitated microbatteries. Because of these unique performance features and the capability to fabricate the proposed ultrathick battery electrodes via a scalable process (i.e., R2R), it is anticipated that this project will be highly attractive to both academic and industrial researchers and will address the growing needs for high performance batteries to support the Canadian industrial stakeholders.