Grant: Engage Grants Program
University of Ottawa
$25,000.00
Development of a simplified method for hydrodynamic pressures in wall corners and roof in liquid storage tanks
FY 2017-18
Summary
Liquid Storage Tanks (LST's) are used for storage of drinking water, various industrial liquids such asLiquified Natural Gas (LNG), oil, petroleum, as well as in the treatment of pulp and paper product wastes aswell as other industrial wastes. The stored materials could also be toxic or flammable, so keeping the tanksfunctional and preventing them from damages during and after an earthquake event is important in the designprocess. Currently, simplified analytical methods are adopted by design codes in North America for the designof these tanks. However such methods are only acceptable in tanks with certain aspect ratios where sloshingwaves are linear. For tanks in which non-linearity occurs, the method loses its accuracy. In a design case,reliable prediction of the forces on the roof and required freeboard is important to prevent failure of the tanks.Some previous studies show that the hydrodynamic pressure due to the sloshing of the liquid at the sharp tankcorners can be up to three times higher compared to other locations. This pressure can cause significant damageto the tanks. In the current project, partially filled tanks with and without a roof are excited on a seismicshaking table. For tanks with a roof, the data is obtained through pressure sensors that are placed at variouslocations on the tank and collecting the pressure data to find the associated pressures at each senor location. Forroofless tanks, the sloshing height is the parameter of interest. The simulations are also recorded in the form ofvideo clips for further investigation of the free surface. For the simulations, the OpenFOAM which is aComputational Fluid Dynamics (CFD) program is used to generate excitations. The results of numerical andexperimental study are used to develop a simplified procedure to calculate the sloshing heights and roofpressures near the tank corners.
Program
Engage Grants Program
Recipient
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
520333-2017
Name nom
Mohammadian, Abdolmajid
Department département
Civil Engineering
Organization id
28
Institution établissement
University of Ottawa
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2017
Competition year année de concours
2017
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
601
Area of application group en
Construction, urban and rural planning
Area of application group fr
Construction, urbanisme et aménagement rural
Area of application en
Structural engineering
Area of application fr
Génie des charpentes
Research subject code
1000
Research subject group en
Civil engineering
Research subject group fr
Génie civil
Research subject en
Civil engineering
Research subject fr
Génie civil
Partie
1
Nb partie
1
Application title
Development of a simplified method for hydrodynamic pressures in wall corners and roof in liquid storage tanks
Keyword
NSERC
Application summary
Liquid Storage Tanks (LST's) are used for storage of drinking water, various industrial liquids such asLiquified Natural Gas (LNG), oil, petroleum, as well as in the treatment of pulp and paper product wastes aswell as other industrial wastes. The stored materials could also be toxic or flammable, so keeping the tanksfunctional and preventing them from damages during and after an earthquake event is important in the designprocess. Currently, simplified analytical methods are adopted by design codes in North America for the designof these tanks. However such methods are only acceptable in tanks with certain aspect ratios where sloshingwaves are linear. For tanks in which non-linearity occurs, the method loses its accuracy. In a design case,reliable prediction of the forces on the roof and required freeboard is important to prevent failure of the tanks.Some previous studies show that the hydrodynamic pressure due to the sloshing of the liquid at the sharp tankcorners can be up to three times higher compared to other locations. This pressure can cause significant damageto the tanks. In the current project, partially filled tanks with and without a roof are excited on a seismicshaking table. For tanks with a roof, the data is obtained through pressure sensors that are placed at variouslocations on the tank and collecting the pressure data to find the associated pressures at each senor location. Forroofless tanks, the sloshing height is the parameter of interest. The simulations are also recorded in the form ofvideo clips for further investigation of the free surface. For the simulations, the OpenFOAM which is aComputational Fluid Dynamics (CFD) program is used to generate excitations. The results of numerical andexperimental study are used to develop a simplified procedure to calculate the sloshing heights and roofpressures near the tank corners.