Grant: Discovery Grants Program - Individual
McGill University
$35,000.00
Processing and Testing of Materials using New Advanced Powder Metallurgy and Additive Manufacturing Strategies
FY 2016-17
Summary
Prof. Brochu's research group is one of the leading group to develop and validate advanced powder metallurgy processes for consolidation of nanostructured powders and rapid solidification-based additive manufacturing technologies focused on materials suffering from solidification cracking, mainly aluminum alloys. This research program will further elevate the industrial impact of his research in four fronts. Firstly, Prof. Brochu will develop new surface engineering processes to facilitate the sintering of nanostructured materials through super solidus sintering. This program will raise the powder metallurgy (PM) forecasted economical growth of 5.31% over the 2012-2016 period by the availability of low-cost improved properties powders (nanograined), which will improve the performance of the manufactured parts. This will be seen in various industries, including automotive, biomedical and aerospace. Secondly, Prof. Brochu will translate systematic studies on the relationship between field assisted sintering towards hardware prototypes. The novel furnaces will permit heating rate reaching easily 1000C/min and consequently reducing the overall sintering runs. As sintering represent 73% of the energy consumption in the flowchart, these new concepts will reduce the economical and energetic footprint of the PM industry. Thirdly, the research program will provide a step growth of the additive manufacturing technology on three fronts: (1) Provide new strategies and developing new hardware to obtain mechanical properties equivalent to wrought, which will circumvent the current concept of ""better than cast, worst than wrought"". (2) Develop new approaches to perform additive manufacturing (AM) of materials suffering from solidification cracking, which are typically associated with high strength alloys. This program will open AM to almost all families of materials, which will be a quantum jump compared to the approximately currently commercialised 8 families of alloys. (3) Engineer solidification paths through alloy engineering to permit AM of ultra fine grained materials, materials that are currently fabricated by severe plastic deformation followed by extensive machining. Overall, this program will contribute to the existing global market of $1,843.2 million in 2012, and growth to $3,471.9 million by 2017, and further increase the AM footprint and industrial integration. (4) The program will also develop new localized testing strategies to assess the regions more susceptible to fracture initiation using nano-impact and nano-fatigue indentation technique. The outcome will be the creation of a low-cost and rapid innovative testing technique to assess the service properties of these advanced materials. This program will train four new Master students, six new and one continuing Ph.D students in fields including materials processing, characterization and testing, and design of new hardware. The training methodology will link the design of novel processes/devices with design of new materials and supported by analytical modeling to graps all underlying phenomena. The HQPs will develop graduate attributes such as analytical tools, decision-making, teamwork attributes, and will be augmented by soft skills such as IP, management, leadership and public speaking. They will be well trained for the reality of the Canadian employment markets, including coating industry, equipment design and fabrication, metallic materials processing and transformation, and materials performance assessment.
Program
Discovery Grants Program - Individual
Recipient
Location
Quebec, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
RGPIN-2014-05866
Name nom
Brochu, Mathieu
Department département
Mining & Materials Engineering. - Mining & Materials Engineering.
Organization id
61
Institution établissement
McGill University
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2016
Competition year année de concours
2014
Award amount
35000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1511
Committee name en
Materials and Chemical Engineering
Committee name fr
Génie chimique et des matériaux
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2001
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials structure, properties and testing
Research subject fr
Structure, propriétés et essais des matériaux
Partie
3
Nb partie
5
Application title
Processing and Testing of Materials using New Advanced Powder Metallurgy and Additive Manufacturing Strategies
Keyword
NSERC
Application summary
Prof. Brochu's research group is one of the leading group to develop and validate advanced powder metallurgy processes for consolidation of nanostructured powders and rapid solidification-based additive manufacturing technologies focused on materials suffering from solidification cracking, mainly aluminum alloys. This research program will further elevate the industrial impact of his research in four fronts. Firstly, Prof. Brochu will develop new surface engineering processes to facilitate the sintering of nanostructured materials through super solidus sintering. This program will raise the powder metallurgy (PM) forecasted economical growth of 5.31% over the 2012-2016 period by the availability of low-cost improved properties powders (nanograined), which will improve the performance of the manufactured parts. This will be seen in various industries, including automotive, biomedical and aerospace. Secondly, Prof. Brochu will translate systematic studies on the relationship between field assisted sintering towards hardware prototypes. The novel furnaces will permit heating rate reaching easily 1000C/min and consequently reducing the overall sintering runs. As sintering represent 73% of the energy consumption in the flowchart, these new concepts will reduce the economical and energetic footprint of the PM industry. Thirdly, the research program will provide a step growth of the additive manufacturing technology on three fronts: (1) Provide new strategies and developing new hardware to obtain mechanical properties equivalent to wrought, which will circumvent the current concept of ""better than cast, worst than wrought"". (2) Develop new approaches to perform additive manufacturing (AM) of materials suffering from solidification cracking, which are typically associated with high strength alloys. This program will open AM to almost all families of materials, which will be a quantum jump compared to the approximately currently commercialised 8 families of alloys. (3) Engineer solidification paths through alloy engineering to permit AM of ultra fine grained materials, materials that are currently fabricated by severe plastic deformation followed by extensive machining. Overall, this program will contribute to the existing global market of $1,843.2 million in 2012, and growth to $3,471.9 million by 2017, and further increase the AM footprint and industrial integration. (4) The program will also develop new localized testing strategies to assess the regions more susceptible to fracture initiation using nano-impact and nano-fatigue indentation technique. The outcome will be the creation of a low-cost and rapid innovative testing technique to assess the service properties of these advanced materials. This program will train four new Master students, six new and one continuing Ph.D students in fields including materials processing, characterization and testing, and design of new hardware. The training methodology will link the design of novel processes/devices with design of new materials and supported by analytical modeling to graps all underlying phenomena. The HQPs will develop graduate attributes such as analytical tools, decision-making, teamwork attributes, and will be augmented by soft skills such as IP, management, leadership and public speaking. They will be well trained for the reality of the Canadian employment markets, including coating industry, equipment design and fabrication, metallic materials processing and transformation, and materials performance assessment.