Canada Spends Logo

Explore our Budget 2026 analysis

Grant: Discovery Grants Program - Individual

The University of British Columbia

$39,000.00

Flexible and Wearable Electronic Devices made from Laser Induced Graphene

FY 2024-25

Summary
Wearable devices aim to continuously monitor and connect us to our environment in order to extend our physical abilities or provide rehabilitation. This vision relies on sensor technologies that can be mass produced reliably at low cost. The proposed research aims to develop flexible and wearable electronic devices using Direct Laser Writing (DLW), an emerging manufacturing technology which is CAD/CAM based, low cost, and scalable. DLW uses a laser engraver to transform the surface of an aromatic polymer or a ligneous material into a 3D graphene like structure referred to as laser induced graphene (LIG). We will address the following challenges that currently prohibit wide scale adoption of LIG sensors: Development of DLW processing for woven fabrics: To date, DLW has been applied to aromatic polymers and a few lignocellulose materials such as wood. Given our interest in composites and wearable fabrics with natural fibers, we will need to expand DLW to those materials and optimize their DLW processing parameters. We expect to build on recent promising studies conducted on wood fibers which indicate that femto second (FS) lasers have the potential to outperform conventional lasers in ligneous materials. Wireless LIG sensors: Creating reliable electrical connections to LIG sensors can be challenging using wired connections. Thus, we will study the creation of passive resonance circuits for powering sensors and wirelessly transmitting sensor signals. This technique is particularly useful for subsurface sensing sensors described above. If successful, this technique is widely applicable to LIG sensor applications in many areas. New LIG sensors: LIG strain sensors detect the change in resistance in response to strain. These measurements have cross coupling from temperature and humidity which is traditionally circumvented with bridge circuit. We will add capacitive and inductive sensing elements and measure impedance at multiple frequencies instead of resistance. The additional measurands will allow us to simultaneously measure temperature, strain, and humidity. A successful implementation of this technique will be widely applicable to other sensing applications, such as proximity sensing using capacitance. Subsurface LIG structures: To date, LIG has only been achieved on the surface of substrates, since the main mechanism for creating sufficient heat has been optical absorption. We will study the creation of LIG using double photon absorption resulting from FS lasers. This mechanism releases very tightly localized energy that can be focussed underneath the substrate's surface. If successful, sub surface LIG could vastly expand the application areas of LIG sensors. One could for example create 3D capacitors and inductors that could then be used for proximity sensing. In the long term, we are planning to apply the above novelties to application areas such as composite structures and functional fabrics.
Program
Discovery Grants Program - Individual
Location
British Columbia, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data

As published

Application id
RGPIN-2024-05125
Name nom
Seethaler, Rudolf
Department département
School of Engineering
Organization id
2
Institution établissement
The University of British Columbia
Province en
British Columbia
Province fr
Colombie-Britannique
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2024
Competition year année de concours
2024
Award amount
39000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
DISCOVERY RESEARCH
Group fr
RECHERCHE AXÉE SUR LA DÉCOUVERTE
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2109
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Mechanical systems and instrumentation
Research subject fr
Instrumentation et systèmes mécaniques
Field of research list names en
Not available
Field of research list names fr
Non disponible
Socioeconomic objective list names en
Not available
Socioeconomic objective list names fr
Non disponible
Application title
Flexible and Wearable Electronic Devices made from Laser Induced Graphene
Keywords
instrumentation; design of sensors and actuaors; laser induced graphene; wearable electronics; flexible electronics; sensors and actuators embedded into composites; comfort sensors for clothing
Application summary
Wearable devices aim to continuously monitor and connect us to our environment in order to extend our physical abilities or provide rehabilitation. This vision relies on sensor technologies that can be mass produced reliably at low cost. The proposed research aims to develop flexible and wearable electronic devices using Direct Laser Writing (DLW), an emerging manufacturing technology which is CAD/CAM based, low cost, and scalable. DLW uses a laser engraver to transform the surface of an aromatic polymer or a ligneous material into a 3D graphene like structure referred to as laser induced graphene (LIG). We will address the following challenges that currently prohibit wide scale adoption of LIG sensors: Development of DLW processing for woven fabrics: To date, DLW has been applied to aromatic polymers and a few lignocellulose materials such as wood. Given our interest in composites and wearable fabrics with natural fibers, we will need to expand DLW to those materials and optimize their DLW processing parameters. We expect to build on recent promising studies conducted on wood fibers which indicate that femto second (FS) lasers have the potential to outperform conventional lasers in ligneous materials. Wireless LIG sensors: Creating reliable electrical connections to LIG sensors can be challenging using wired connections. Thus, we will study the creation of passive resonance circuits for powering sensors and wirelessly transmitting sensor signals. This technique is particularly useful for subsurface sensing sensors described above. If successful, this technique is widely applicable to LIG sensor applications in many areas. New LIG sensors: LIG strain sensors detect the change in resistance in response to strain. These measurements have cross coupling from temperature and humidity which is traditionally circumvented with bridge circuit. We will add capacitive and inductive sensing elements and measure impedance at multiple frequencies instead of resistance. The additional measurands will allow us to simultaneously measure temperature, strain, and humidity. A successful implementation of this technique will be widely applicable to other sensing applications, such as proximity sensing using capacitance. Subsurface LIG structures: To date, LIG has only been achieved on the surface of substrates, since the main mechanism for creating sufficient heat has been optical absorption. We will study the creation of LIG using double photon absorption resulting from FS lasers. This mechanism releases very tightly localized energy that can be focussed underneath the substrate's surface. If successful, sub surface LIG could vastly expand the application areas of LIG sensors. One could for example create 3D capacitors and inductors that could then be used for proximity sensing. In the long term, we are planning to apply the above novelties to application areas such as composite structures and functional fabrics.
The University of British Columbia - $39,000 Grant (2… | Canada Spends