Grant: Discovery Grants Program - Individual
École Polytechnique de Montréal
$40,000.00
Catalysts and membrane breakthrough for direct high temperature propane PEM fuel cell appliccations
FY 2015-16
Summary
This research project aims to bring significant breakthrough in catalyst and membranes materials on the development of direct high temperature propane PEM Fuel cells. Using ab initio calculation as first screening, some new phosphorus Pd-alloy based cathodes and composite Pd-oxy-nitride materials anodes have been identified for direct hydrocarbon PEM fuel cells applications. This project will develop direct propane PEM Fuel Cells based on the home-prepared (P- Pd-alloys, Pd-alloy-oxy nitride and composite PBI-HMI-Tf membrane). The catalysts electrodes will be processed using a new method based on sol-gel approach. The catalyst will be characterised by XRD, SEM-EDS, ICP-MS, etc. They will be tested in a half electrochemical cell for the propane electro-oxidation on Pd-alloy-oxy-nitride and kinetic studies. Similar studies will be done for the ORR on P-Pd-alloy. The materials which exhibited the best performance for these reactions will be correlated to the results (adsorption energies of the O2 reduction species on P-Pd-alloys, and propane oxidation on pd-alloy-oxy-nitride, work function, d-band center, etc.) predicted by ab initio calculations. These correlations will be used to support a new formalism we are building in electro catalysis. The best catalysts will be supported on carbon or modified T4O7 nano-tubes we already fabricated and will be tested as anodes and cathodes in a 2.25 cm2 area single PEM fuel cell at 80- 150 oC. An improved composite PBI membranes cast with ionic liquids, we identified recently will be used as high temperature membranes. The DPFC fixture will include this modified nano composite PBI based membranes and the above optimised anodes and cathodes. Single Fuel cell polarization curves will be taken under different propane/oxygen pressure ratios (ratio PR). The materials and PR which will exhibit the best results for DPFC operating at intermediate temperature (80-150 oC) will be determined. The performance target at the end of the project will be a cell power density of a 200 mW/cm2. The ultimate objective is to determine a new class of materials for direct hydrocarbon PEM fuel cells.
Program
Discovery Grants Program - Individual
Recipient
Location
Quebec, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
36520-2011
Name nom
Savadogo, Oumarou
Department département
Génie chimique
Organization id
64
Institution établissement
École Polytechnique de Montréal
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2015
Competition year année de concours
2011
Award amount
40000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1511
Committee name en
Materials and Chemical Engineering
Committee name fr
Génie chimique et des matériaux
Area of application code
304
Area of application group en
Energy resources
Area of application group fr
Ressources d'énergie
Area of application en
Electrical energy
Area of application fr
Énergie électrique
Research subject code
2000
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials science and technology
Research subject fr
Science et technologie des matériaux
Partie
5
Nb partie
5
Application title
Catalysts and membrane breakthrough for direct high temperature propane PEM fuel cell appliccations
Keyword
NSERC
Application summary
This research project aims to bring significant breakthrough in catalyst and membranes materials on the development of direct high temperature propane PEM Fuel cells. Using ab initio calculation as first screening, some new phosphorus Pd-alloy based cathodes and composite Pd-oxy-nitride materials anodes have been identified for direct hydrocarbon PEM fuel cells applications. This project will develop direct propane PEM Fuel Cells based on the home-prepared (P- Pd-alloys, Pd-alloy-oxy nitride and composite PBI-HMI-Tf membrane). The catalysts electrodes will be processed using a new method based on sol-gel approach. The catalyst will be characterised by XRD, SEM-EDS, ICP-MS, etc. They will be tested in a half electrochemical cell for the propane electro-oxidation on Pd-alloy-oxy-nitride and kinetic studies. Similar studies will be done for the ORR on P-Pd-alloy. The materials which exhibited the best performance for these reactions will be correlated to the results (adsorption energies of the O2 reduction species on P-Pd-alloys, and propane oxidation on pd-alloy-oxy-nitride, work function, d-band center, etc.) predicted by ab initio calculations. These correlations will be used to support a new formalism we are building in electro catalysis. The best catalysts will be supported on carbon or modified T4O7 nano-tubes we already fabricated and will be tested as anodes and cathodes in a 2.25 cm2 area single PEM fuel cell at 80- 150 oC. An improved composite PBI membranes cast with ionic liquids, we identified recently will be used as high temperature membranes. The DPFC fixture will include this modified nano composite PBI based membranes and the above optimised anodes and cathodes. Single Fuel cell polarization curves will be taken under different propane/oxygen pressure ratios (ratio PR). The materials and PR which will exhibit the best results for DPFC operating at intermediate temperature (80-150 oC) will be determined. The performance target at the end of the project will be a cell power density of a 200 mW/cm2. The ultimate objective is to determine a new class of materials for direct hydrocarbon PEM fuel cells.