Grant: Discovery Grants Program - Individual
McMaster University
$42,000.00
Lower Cost and Higher Efficiency Solar Cells for 1-sun Applications
FY 2015-16
Summary
There are currently two broad technologies used for converting sunlight to electricity; Si solar cells used at 1-sun (in a flat panel format) and III-V based multijunction cells used in conjunction with concentration optics and tracking systems. As single junction devices, Si cells are limited theoretically to ~30% efficiency and have reached their practical limit of ~25%. Multijunction technology is likely to produce cells exceeding 50% efficiency under concentration this decade; however the cell costs are prohibitively high to be used in 1-sun applications. Therefore, the greatest imperative in Si cell technology is to reduce the cost, while maintaining high efficiency. There is also a tremendous opportunity to develop a multijunction cell technology that is sufficiently cost effective to be implemented in 1-sun applications. Based on recent research results, we have made significant progress in both directions and continued research efforts are likely to yield breakthroughs.
Since the Si material is a significant fraction of the cell cost, there is substantial incentive to use thinner wafers than the current ~180 µm. However, the Si wafer in use today serves a dual purpose. It provides mechanical support for wafer handling and since Si is a poor optical absorber its thickness is required for optimal absorption. However, the optical path length can be increased by at least a factor of 50 using advanced light trapping strategies, with the potential to achieve efficiencies comparable to conventional thick cells, while virtually eliminating the material cost. We have fabricated 10 µm thick single-crystal Si-membrane solar cells, incorporating simple light trapping methods, yielding a device efficiency of ~10%. The design (via numerical simulation), fabrication (via low cost methods), optical characterization (corroborating designs) and implementation of more advanced light trapping strategies are expected to yield cells with thicknesses in the range of 2-10 µm and efficiencies exceeding 20%. Thin Si cells with advanced designs have the potential to dramatically reduce cost, while maintaining efficiency.
In multijunction solar cells, each sub-cell is designed to optimally capture energy from a portion of the solar spectrum. An alternate approach to Ge substrates is to use much less expensive Si substrates for the bottom cell, leveraging the tremendous infrastructure of Si cell technology. There are two impediments with this approach, firstly that the Si cell becomes the current limiting cell for the triple junction device, compromising the energy conversion from the top cells and secondly that it has not proven possible to grow materials on Si substrates with sufficiently high quality. In our recent work, we have found solutions to both problems, with the invention of areal current matching to match the current of the Si cell to the top cells and the development of wafer bonding methods to join separately optimized Si and III-V cells in a hybrid integration approach, yielding cells with 25.8% efficiency, a world record for a Si-based multijunction solar cell. We believe that cells with efficiency in excess of 30% can be achieved with this method.
However, our long term objective is to make multijunction cells that are sufficiently inexpensive for use in 1-sun applications, while exceeding the present limits of conventional 1-sun cells. We propose to make high quality III-V solar cells using a much less expensive process than the MOCVD process currently used and combine them with Si bottom cells via wafer bonding and areal current matching. This ambitious approach would be transformative, providing cells with significantly higher efficiencies than currently available, suitable for widespread deployment.
Program
Discovery Grants Program - Individual
Recipient
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
RGPIN-2014-03736
Name nom
Kleiman, Rafael
Department département
Engineering Physics
Organization id
27
Institution établissement
McMaster University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2015
Competition year année de concours
2014
Award amount
42000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1510
Committee name en
Electrical and Computer Engineering
Committee name fr
Génie électrique et informatique
Area of application code
303
Area of application group en
Energy resources
Area of application group fr
Ressources d'énergie
Area of application en
Alternative energy resources
Area of application fr
Autres ressources d'énergie
Research subject code
2516
Research subject group en
Electrical and electronic engineering
Research subject group fr
Génie électrique et électronique
Research subject en
Energy conversion and distribution
Research subject fr
Conversion et distribution de l'énergie
Partie
2
Nb partie
5
Application title
Lower Cost and Higher Efficiency Solar Cells for 1-sun Applications
Keyword
NSERC
Application summary
There are currently two broad technologies used for converting sunlight to electricity; Si solar cells used at 1-sun (in a flat panel format) and III-V based multijunction cells used in conjunction with concentration optics and tracking systems. As single junction devices, Si cells are limited theoretically to ~30% efficiency and have reached their practical limit of ~25%. Multijunction technology is likely to produce cells exceeding 50% efficiency under concentration this decade; however the cell costs are prohibitively high to be used in 1-sun applications. Therefore, the greatest imperative in Si cell technology is to reduce the cost, while maintaining high efficiency. There is also a tremendous opportunity to develop a multijunction cell technology that is sufficiently cost effective to be implemented in 1-sun applications. Based on recent research results, we have made significant progress in both directions and continued research efforts are likely to yield breakthroughs.
Since the Si material is a significant fraction of the cell cost, there is substantial incentive to use thinner wafers than the current ~180 µm. However, the Si wafer in use today serves a dual purpose. It provides mechanical support for wafer handling and since Si is a poor optical absorber its thickness is required for optimal absorption. However, the optical path length can be increased by at least a factor of 50 using advanced light trapping strategies, with the potential to achieve efficiencies comparable to conventional thick cells, while virtually eliminating the material cost. We have fabricated 10 µm thick single-crystal Si-membrane solar cells, incorporating simple light trapping methods, yielding a device efficiency of ~10%. The design (via numerical simulation), fabrication (via low cost methods), optical characterization (corroborating designs) and implementation of more advanced light trapping strategies are expected to yield cells with thicknesses in the range of 2-10 µm and efficiencies exceeding 20%. Thin Si cells with advanced designs have the potential to dramatically reduce cost, while maintaining efficiency.
In multijunction solar cells, each sub-cell is designed to optimally capture energy from a portion of the solar spectrum. An alternate approach to Ge substrates is to use much less expensive Si substrates for the bottom cell, leveraging the tremendous infrastructure of Si cell technology. There are two impediments with this approach, firstly that the Si cell becomes the current limiting cell for the triple junction device, compromising the energy conversion from the top cells and secondly that it has not proven possible to grow materials on Si substrates with sufficiently high quality. In our recent work, we have found solutions to both problems, with the invention of areal current matching to match the current of the Si cell to the top cells and the development of wafer bonding methods to join separately optimized Si and III-V cells in a hybrid integration approach, yielding cells with 25.8% efficiency, a world record for a Si-based multijunction solar cell. We believe that cells with efficiency in excess of 30% can be achieved with this method.
However, our long term objective is to make multijunction cells that are sufficiently inexpensive for use in 1-sun applications, while exceeding the present limits of conventional 1-sun cells. We propose to make high quality III-V solar cells using a much less expensive process than the MOCVD process currently used and combine them with Si bottom cells via wafer bonding and areal current matching. This ambitious approach would be transformative, providing cells with significantly higher efficiencies than currently available, suitable for widespread deployment.