Grant: Discovery Grants Program - Individual
McMaster University
$26,000.00
Representations and Algorithms for Manufacturing Coordinate Metrology Point Clouds
FY 2016-17
Summary
Successful design and manufacturing requires minimum material use with repeatable material properties and shape production. Increased memory and parallel processing has led to demand for new Computer Aided Design and Manufacturing mesh and point cloud based representations and algorithms that can provide analyses at factory floor production rates. Addressing this demand gap is the focus of the research program. Specific short term emphasis is outlined below.
1) In part topology optimization, ""non-optimization volume"" (such as assembly mating surfaces) constraints are specified, but the remaining ""optimization volume"" may, depending on expected loads and deflection/strain requirements, be reduced. Software available in the applicant's laboratory will be used to design Additive Manufacturing (AM) parts that will be 3D printed and measured to determine both free state geometry and deflection/strain under applied loads. The outcome will be validation and greater confidence in the topology optimization / AM process, and more rapid industry adoption of this competitive emerging technology.
2) When using metrology digitizers, an essential task is registration of the point cloud to the nominal part surface. For very thin parts, such as sheet metal, the surface to which the point matches can be ambiguous. Using the applicant's custom installation, for each surface point, the digitizer direction vector towards the digitizer will be determined. Surfaces with opposing normal vectors can then be rejected as matches.
3) A recently acquired laboratory digitizer collects point clouds at rates approaching 500,000 samples / second. Networking up to 4 digitizers, a data point collection rate of 2 million samples / second is achievable. For an automobile mirror sized part, 12 million points must, within 6 seconds, be registered with the nominal geometry. Sole use of serial desktop computer algorithms requires 5 minutes or more for the related computations. Development of a 448 parallel core Graphical Processing Unit video card algorithm has reduced the calculation time to 15 seconds, and recent laboratory purchase of 2880 core technology offers potential for more speed-up. The proposed research will exploit this new technology with the goal of developing parallel algorithms that will process point clouds at factory floor rates.
The proposed research program involves highly employable student training in the use of state-of-the-art software, coordinate metrology digitizers, and parallel computing hardware. It addresses important AM design optimization and measurement issues essential to maintain Canadian competitiveness in lightweight design and manufacture of medical appliance, automotive, aerospace, and consumer goods.
Program
Discovery Grants Program - Individual
Recipient
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
RGPIN-2016-05140
Name nom
Spence, Allan
Department département
Mechanical Engineering - Mechanical Engineering
Organization id
27
Institution établissement
McMaster University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2016
Competition year année de concours
2016
Award amount
26000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
1702
Research subject group en
Design and manufacturing
Research subject group fr
Conception et fabrication
Research subject en
Advanced manufacturing
Research subject fr
Méthodes de fabrication avancées
Partie
1
Nb partie
5
Application title
Representations and Algorithms for Manufacturing Coordinate Metrology Point Clouds
Keyword
NSERC
Application summary
Successful design and manufacturing requires minimum material use with repeatable material properties and shape production. Increased memory and parallel processing has led to demand for new Computer Aided Design and Manufacturing mesh and point cloud based representations and algorithms that can provide analyses at factory floor production rates. Addressing this demand gap is the focus of the research program. Specific short term emphasis is outlined below.
1) In part topology optimization, ""non-optimization volume"" (such as assembly mating surfaces) constraints are specified, but the remaining ""optimization volume"" may, depending on expected loads and deflection/strain requirements, be reduced. Software available in the applicant's laboratory will be used to design Additive Manufacturing (AM) parts that will be 3D printed and measured to determine both free state geometry and deflection/strain under applied loads. The outcome will be validation and greater confidence in the topology optimization / AM process, and more rapid industry adoption of this competitive emerging technology.
2) When using metrology digitizers, an essential task is registration of the point cloud to the nominal part surface. For very thin parts, such as sheet metal, the surface to which the point matches can be ambiguous. Using the applicant's custom installation, for each surface point, the digitizer direction vector towards the digitizer will be determined. Surfaces with opposing normal vectors can then be rejected as matches.
3) A recently acquired laboratory digitizer collects point clouds at rates approaching 500,000 samples / second. Networking up to 4 digitizers, a data point collection rate of 2 million samples / second is achievable. For an automobile mirror sized part, 12 million points must, within 6 seconds, be registered with the nominal geometry. Sole use of serial desktop computer algorithms requires 5 minutes or more for the related computations. Development of a 448 parallel core Graphical Processing Unit video card algorithm has reduced the calculation time to 15 seconds, and recent laboratory purchase of 2880 core technology offers potential for more speed-up. The proposed research will exploit this new technology with the goal of developing parallel algorithms that will process point clouds at factory floor rates.
The proposed research program involves highly employable student training in the use of state-of-the-art software, coordinate metrology digitizers, and parallel computing hardware. It addresses important AM design optimization and measurement issues essential to maintain Canadian competitiveness in lightweight design and manufacture of medical appliance, automotive, aerospace, and consumer goods.