Grant: Engage Plus Grants Program
Université de Sherbrooke
$12,500.00
Prototyping of large antenna array processing on FPGA-based platform with emphasis on calibration
FY 2015-16
Summary
Nutaq offers a wide array of highly sophisticated digital signal processing boards and systems which are sold
mainly as development platforms for, among others, the wireless communications market. Their platforms,
which incorporate FPGAs and DSPs, are complemented by IP (Intellectual Property) blocks which their clients
can use as starting points for their own designs. A significant portion of their clients is involved in the
development of array processing (beamforming and-or MIMO) techniques. Furthermore, market interest in
so-called ""massive MIMO"" techniques is escalating rapidly. However, one of the main issues to tackle to
achieve credible demonstration of functioning massive MIMO hardware is that of phase alignement and
synchronization across antenna arrays of large scale (32, 64, even hundreds of antennas). In a previous Engage
grant, array processing architectures were devised, suitable to scaling without complexity explosion, based on
dividing the array into smaller blocks and performing a first layer of array processing within each block. For
this first proof-of-concept work, RF circuitry was not included; the MIMO channel was rather emulated at
baseband within the FPGAs. In order to achieve a compelling turnkey demonstration on Nutaq hardware, RF
hardware, antennas and actual over-the-air transmission must be incorporated in this second phase. Building
upon the results and experience from the previous Engage grant, the goal here is to extend the previously
developed receiver architecture to 1- include an effective and practical phase alignment / synchronization
mechanism and 2- adapt the said architecture to an OFDM modulation typical of modern broadband
communication systems. This phase 2 project is another stepping stone in building a long-term relationship
between Sherbrooke and Nutaq based on excellence in practical massive MIMO solutions.
Program
Engage Plus Grants Program
Recipient
Location
Quebec, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
488305-2015
Name nom
Roy, Sébastien
Department département
Génie électrique et génie informatique
Organization id
68
Institution établissement
Université de Sherbrooke
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2015
Competition year année de concours
2015
Award amount
12500
Program id
EGP2
Program name en
Engage Plus Grants Program
Program name fr
Programme de subvention d'engagement partenarial Plus
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1552
Committee name en
Quebec Internal Decision Committee
Committee name fr
Comité de décision interne pour le Québec
Area of application code
800
Area of application group en
Information and communication services
Area of application group fr
Services d'information et de télécommunications
Area of application en
Information and communication services
Area of application fr
Services d'information et de télécommunications
Research subject code
2500
Research subject group en
Electrical and electronic engineering
Research subject group fr
Génie électrique et électronique
Research subject en
Electrical and electronic engineering
Research subject fr
Génie électrique et électronique
Partie
1
Nb partie
1
Application title
Prototyping of large antenna array processing on FPGA-based platform with emphasis on calibration
Keyword
NSERC
Application summary
Nutaq offers a wide array of highly sophisticated digital signal processing boards and systems which are sold
mainly as development platforms for, among others, the wireless communications market. Their platforms,
which incorporate FPGAs and DSPs, are complemented by IP (Intellectual Property) blocks which their clients
can use as starting points for their own designs. A significant portion of their clients is involved in the
development of array processing (beamforming and-or MIMO) techniques. Furthermore, market interest in
so-called ""massive MIMO"" techniques is escalating rapidly. However, one of the main issues to tackle to
achieve credible demonstration of functioning massive MIMO hardware is that of phase alignement and
synchronization across antenna arrays of large scale (32, 64, even hundreds of antennas). In a previous Engage
grant, array processing architectures were devised, suitable to scaling without complexity explosion, based on
dividing the array into smaller blocks and performing a first layer of array processing within each block. For
this first proof-of-concept work, RF circuitry was not included; the MIMO channel was rather emulated at
baseband within the FPGAs. In order to achieve a compelling turnkey demonstration on Nutaq hardware, RF
hardware, antennas and actual over-the-air transmission must be incorporated in this second phase. Building
upon the results and experience from the previous Engage grant, the goal here is to extend the previously
developed receiver architecture to 1- include an effective and practical phase alignment / synchronization
mechanism and 2- adapt the said architecture to an OFDM modulation typical of modern broadband
communication systems. This phase 2 project is another stepping stone in building a long-term relationship
between Sherbrooke and Nutaq based on excellence in practical massive MIMO solutions.