Grant: Discovery Grants Program - Individual
The University of British Columbia
$59,000.00
Electrochemical reactors for the mine of the future: securing critical metals for electrification
FY 2023-24
Summary
Reduction of greenhouse gas emissions (GHG) requires electrification. Electrification requires copper and other critical metals. For example, a 3 MW wind turbine requires almost 5 t of copper (Cu), and an electric vehicle contains 4 times the amount of Cu than is used in an internal combustion vehicle. As we electrify over the next 25 years, we will need approximately 550 Mt of copper: more than has ever been produced by humans to date. Recycling cannot accommodate this exponential increase in demand. At the same time, Cu mining is increasingly under technological, societal and regulatory pressure to produce metal more responsibly in the face of decreasing ore grades and depleting resources. Current ore grades are ca. 0.6%, meaning that only 6 kg of Cu is found in 1 t of ore. The available resources are so depleted that peak copper production could occur in the next 3-5 years. Governments worldwide are limiting permits for mining due to environmental impacts. All of these factors limit our ability to electrify. The primary copper-bearing mineral is chalcopyrite (CuFeS2). CuFeS2 ores are currently concentrated and then smelted. The concentration step is highly energy intensive, releasing 15 kg CO2 per kg Cu produced. Hydrometallurgical methods (i.e., leaching the Cu into solution) that do not require the concentration step are preferred as they generate less GHG but their implementation has been limited due to the technical challenge associated with economically dissolving the chalcopyrite mineral. The electrification imperative dictates that the sector must innovate well beyond the traditional paradigm. The Cu mine of the future will function on renewable energy, will not dig or displace ground and will use advanced extraction and purification technologies in-situ. To get to this ideal scenario, an enormous amount of research and development is required. We propose a program of research along 4 axes to advance new hydrometallurgical and electrochemical methods for faster and cleaner Cu production. These axes include: (1) high frequency alternating current (AC) electrochemical extraction methods and reactors to extract Cu much faster than is currently possible; (2) the application of AC methods developed in (1), in combination with in-situ electro-osmotic leaching to extract Cu directly from the ground; (3) electrochemical reactors to generate reagents, such as neutralizers, oxidizers and acids for use in processing circuits; (4) integrating the electrochemical extraction methods in (1-3) with new battery technologies: using the mine itself as a battery for renewable energies as well as a source of refined metal. The overall goal of the program is to reduce the environmental footprint of mining and metal extraction. The proposed program will transform the Cu production industry, apply new high-tech solutions to a major techno-economical challenge, and lead the way to modernizing the production of other critical metals.
Program
Discovery Grants Program - Individual
Recipient
Location
British Columbia, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
RGPIN-2023-04545
Name nom
Asselin, Edouard
Department département
Materials Engineering
Organization id
2
Institution établissement
The University of British Columbia
Province en
British Columbia
Province fr
Colombie-Britannique
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2023
Competition year année de concours
2023
Award amount
59000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
DISCOVERY RESEARCH
Group fr
RECHERCHE AXÉE SUR LA DÉCOUVERTE
Committee code
1511
Committee name en
Materials and Chemical Engineering
Committee name fr
Génie chimique et des matériaux
Area of application code
202
Area of application group en
Natural resources (economic aspects)
Area of application group fr
Ressources naturelles (aspects économiques)
Area of application en
Mineral resources ( prospecting, exploration, mining, extraction, processing)
Area of application fr
Ressources minérales (prospection, exploration, mines, extraction et préparation)
Research subject code
2016
Research subject group en
Materials science and technology
Research subject group fr
Minerals
Research subject en
Science et technologie des matériaux
Research subject fr
Minéraux
Application title
Electrochemical reactors for the mine of the future: securing critical metals for electrification
Keyword
Battery; Copper; Electrochemistry; Electro-osmosis; Extraction; Hydrometallurgy; Leaching; Mining; Reactor; Sulfide
Application summary
Reduction of greenhouse gas emissions (GHG) requires electrification. Electrification requires copper and other critical metals. For example, a 3 MW wind turbine requires almost 5 t of copper (Cu), and an electric vehicle contains 4 times the amount of Cu than is used in an internal combustion vehicle. As we electrify over the next 25 years, we will need approximately 550 Mt of copper: more than has ever been produced by humans to date. Recycling cannot accommodate this exponential increase in demand. At the same time, Cu mining is increasingly under technological, societal and regulatory pressure to produce metal more responsibly in the face of decreasing ore grades and depleting resources. Current ore grades are ca. 0.6%, meaning that only 6 kg of Cu is found in 1 t of ore. The available resources are so depleted that peak copper production could occur in the next 3-5 years. Governments worldwide are limiting permits for mining due to environmental impacts. All of these factors limit our ability to electrify. The primary copper-bearing mineral is chalcopyrite (CuFeS2). CuFeS2 ores are currently concentrated and then smelted. The concentration step is highly energy intensive, releasing 15 kg CO2 per kg Cu produced. Hydrometallurgical methods (i.e., leaching the Cu into solution) that do not require the concentration step are preferred as they generate less GHG but their implementation has been limited due to the technical challenge associated with economically dissolving the chalcopyrite mineral. The electrification imperative dictates that the sector must innovate well beyond the traditional paradigm. The Cu mine of the future will function on renewable energy, will not dig or displace ground and will use advanced extraction and purification technologies in-situ. To get to this ideal scenario, an enormous amount of research and development is required. We propose a program of research along 4 axes to advance new hydrometallurgical and electrochemical methods for faster and cleaner Cu production. These axes include: (1) high frequency alternating current (AC) electrochemical extraction methods and reactors to extract Cu much faster than is currently possible; (2) the application of AC methods developed in (1), in combination with in-situ electro-osmotic leaching to extract Cu directly from the ground; (3) electrochemical reactors to generate reagents, such as neutralizers, oxidizers and acids for use in processing circuits; (4) integrating the electrochemical extraction methods in (1-3) with new battery technologies: using the mine itself as a battery for renewable energies as well as a source of refined metal. The overall goal of the program is to reduce the environmental footprint of mining and metal extraction. The proposed program will transform the Cu production industry, apply new high-tech solutions to a major techno-economical challenge, and lead the way to modernizing the production of other critical metals.