Canada Spends Logo

Explore our Budget 2026 analysis

Grant: Engage Grants Program

University of Windsor

$25,000.00

Development of new methods for determination of trimming die wear

FY 2015-16

Summary
This project addresses a current problem that impedes productivity and product quality at Ford plants where trimming operations are performed on automotive body panels made of advanced high strength steel (AHSS). Parts made of AHSS steels provide high strength-to-mass ratio and thus are important for automotive light weighting strategy but in order to increase their use the significant wear damage they cause to the trim dies should be reduced. The trim die wear has undesirable consequences including deterioration of trimmed parts' edges and an increased cost of operation as the worn dies need to be replaced frequently. In order to alleviate the die wear problem the first step should be to develop a measurement method that will determine the die life accurately and in a consistent way. The proposed work consists of development of a methodology for wear measurements on upper and lower trim dies as a function of the number of trimming cycles-- and by considering the die-workpiece clearance as well as the die angle. Wear measurement methods that have not been previously applied to trimming die measurement will be assessed at University of Windsor's Tribology of Materials Research Centre. These will consist of three dimensional non- contact interferometry methods supported by specialized digital optical microscopes with large depth of field focus. Both uncoated and coated DP980 type AHSS will be trimmed at Ford's facilities and the worn dies will be evaluated for the amount of damage as well as the type of surface damage that may consist of galling, material transfer abrasion, plasticity or micro-chipping controlled damage features. The research will correlate wear measurements to the particular type of wear that may occur at the cutting edge and the results will be transferred to Ford. The results are expected to contribute to the development of a Ford Standard for determining die wear. The project will help to increase the efficiency of trimming operation schedules and implementation of new tool wear reduction strategies.
Program
Engage Grants Program
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data

As published

Application id
485985-2015
Name nom
Alpas, Ahmet
Department département
Mechanical, Automotive and Materials Engineering
Organization id
37
Institution établissement
University of Windsor
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2015
Competition year année de concours
2015
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
1208
Area of application group en
Advancement of knowledge
Area of application group fr
Avancement des connaissances
Area of application en
Materials sciences
Area of application fr
Sciences des matériaux
Research subject code
2001
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials structure, properties and testing
Research subject fr
Structure, propriétés et essais des matériaux
Partie
1
Nb partie
1
Application title
Development of new methods for determination of trimming die wear
Keyword
NSERC
Application summary
This project addresses a current problem that impedes productivity and product quality at Ford plants where trimming operations are performed on automotive body panels made of advanced high strength steel (AHSS). Parts made of AHSS steels provide high strength-to-mass ratio and thus are important for automotive light weighting strategy but in order to increase their use the significant wear damage they cause to the trim dies should be reduced. The trim die wear has undesirable consequences including deterioration of trimmed parts' edges and an increased cost of operation as the worn dies need to be replaced frequently. In order to alleviate the die wear problem the first step should be to develop a measurement method that will determine the die life accurately and in a consistent way. The proposed work consists of development of a methodology for wear measurements on upper and lower trim dies as a function of the number of trimming cycles-- and by considering the die-workpiece clearance as well as the die angle. Wear measurement methods that have not been previously applied to trimming die measurement will be assessed at University of Windsor's Tribology of Materials Research Centre. These will consist of three dimensional non- contact interferometry methods supported by specialized digital optical microscopes with large depth of field focus. Both uncoated and coated DP980 type AHSS will be trimmed at Ford's facilities and the worn dies will be evaluated for the amount of damage as well as the type of surface damage that may consist of galling, material transfer abrasion, plasticity or micro-chipping controlled damage features. The research will correlate wear measurements to the particular type of wear that may occur at the cutting edge and the results will be transferred to Ford. The results are expected to contribute to the development of a Ford Standard for determining die wear. The project will help to increase the efficiency of trimming operation schedules and implementation of new tool wear reduction strategies.
University of Windsor - $25,000 Grant (2015-16) | Canada Spends