Canada Spends Logo

Explore our Budget 2026 analysis

Grant: Engage Grants Program

University of Toronto

$25,000.00

Air vent valve for a die-casting mould

FY 2015-16

Summary
High-pressure die-casting is a process used to make a wide range of metal components, in which liquid metal is injected under high pressure into a steel mould, where it freezes very rapidly upon contact with the walls. Air in the mould cavity must be vented during metal injection or it becomes trapped in the metal part, creating pores that may require the piece to be scrapped. In practice a valve is mounted at the exit of the air passage, actuated using either an electric, pneumatic, or hydraulic system, that allows air to vent and then shuts in time to prevent molten metal from discharging through it. The University of Toronto will collaborate with Bholster Technologies to develop a valve to permit air from die casting moulds to vent during the injection phase while preventing liquid metal from escaping. We plan to do this by using the momentum of the fast moving liquid metal to impinge on the valve and shut it off before the melt can escape from the valve exhaust. The vent valve consists of two portions, one half positioned in the moving die and the other half in the stationary die. A passageway is machined in the die cavity to allow trapped air to escape through the vent valve. A spring holds the valve piston open. When the fast moving molten metal fills the mould cavity the air in it is forced through the open valve and exits though the valve exhaust. When the melt arrives it is directed by the contours of the valve body to impinge on the spring-loaded piston. The high momentum of the liquid metal forces the piston to close while simultaneously steering the melt away from the valve opening, thus preventing liquid metal from flowing through the valve exit. Experiments will be done with the valve using water as the working fluid and a high-speed video camera used to observe the path of water flow through the valve. We propose to study how the liquid momentum affects valve movement and how sensitive the valve response time is to changes in the liquid flow rate
Program
Engage Grants Program
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data

As published

Application id
479159-2015
Name nom
Chandra, Sanjeev
Department département
Mechanical and Industrial Engineering
Organization id
31
Institution établissement
University of Toronto
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2015
Competition year année de concours
2015
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
510
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Fabricated metal products
Area of application fr
Produits métalliques usinés
Research subject code
1702
Research subject group en
Design and manufacturing
Research subject group fr
Conception et fabrication
Research subject en
Advanced manufacturing
Research subject fr
Méthodes de fabrication avancées
Partie
1
Nb partie
1
Application title
Air vent valve for a die-casting mould
Keyword
NSERC
Application summary
High-pressure die-casting is a process used to make a wide range of metal components, in which liquid metal is injected under high pressure into a steel mould, where it freezes very rapidly upon contact with the walls. Air in the mould cavity must be vented during metal injection or it becomes trapped in the metal part, creating pores that may require the piece to be scrapped. In practice a valve is mounted at the exit of the air passage, actuated using either an electric, pneumatic, or hydraulic system, that allows air to vent and then shuts in time to prevent molten metal from discharging through it. The University of Toronto will collaborate with Bholster Technologies to develop a valve to permit air from die casting moulds to vent during the injection phase while preventing liquid metal from escaping. We plan to do this by using the momentum of the fast moving liquid metal to impinge on the valve and shut it off before the melt can escape from the valve exhaust. The vent valve consists of two portions, one half positioned in the moving die and the other half in the stationary die. A passageway is machined in the die cavity to allow trapped air to escape through the vent valve. A spring holds the valve piston open. When the fast moving molten metal fills the mould cavity the air in it is forced through the open valve and exits though the valve exhaust. When the melt arrives it is directed by the contours of the valve body to impinge on the spring-loaded piston. The high momentum of the liquid metal forces the piston to close while simultaneously steering the melt away from the valve opening, thus preventing liquid metal from flowing through the valve exit. Experiments will be done with the valve using water as the working fluid and a high-speed video camera used to observe the path of water flow through the valve. We propose to study how the liquid momentum affects valve movement and how sensitive the valve response time is to changes in the liquid flow rate