Grant: Discovery Grants Program - Individual
McGill University
$24,000.00
On the measurement, characterization and control of static-wing tip vortex flow and its extension to flapping wing
FY 2015-16
Summary
Lift increment and drag reduction of aircraft have been persistently pursued by aerodynamicists and aircraft designers. As such, the reduction of wingtip vortices-generated lift-induced drag, including flight hazards, is therefore of great importance. The sharklet winglets and split winglets installed on A320NEO and B737MAX reinforce the significance of lift-induced drag reduction and the ensuing fuel-burn savings. Intensive study of the wingtip vortex and its control has been carried out at McGill University by the applicant (via 2009-2013 NSERC DG). In addition to the measurements and characterization of the tip vortex at low Reynolds numbers, the lift-induced drag is also computed, based on the cross-flow velocity measurements, which not only allows the evaluation of its contribution to the total drag but also serves as an indicative of the effectiveness of tip vortex flow control (alternative to the changes in the strength and size of the tip vortex). Meanwhile, different tip vortex control methods were also attempted. Among them, the tip-mounted non-slender half-delta wing (HDW), with a root chord smaller than 50% of the main wing, was found to have the greatest potential for effective vortex attenuation and induced-drag reduction. Surprising enough, the proposed HDW tip-vortex control is also capable of producing concurrent lift increment and stall delay. Further investigations are, however, needed to materialize its practical application.
The objectives of this proposed research, therefore, have two folds. The first part is to continue the study of the promising on-going tip-mounted HDW tip vortex control scheme. Extensive wind-tunnel measurements of the size, location and deflection (relative to the main wing) of the HDW, and the Reynolds number will be acquired. These measurements will enable us to realize a new and practical tip vortex control technique. The knowledge and findings learned from the static-wing tip vortex is then extended to the second part of this proposal; i.e., the study and control of the tip vortex generated by flapping wings. The flapping wing study has been an increased interest in micro-air vehicles (MAVs) due to their extraordinary maneuverability. However, in comparison with fixed-wing MAVs, the flapping-wing MAVs are more difficult due to the extraordinary complexity of the flapping motions (which produce both lift and thrust) and the ensuing flow phenomena. Furthermore, to add to the complexity, tip effects must be carefully considered. Fortunately, the leading-edge vortex (LEV), similar to that developed on oscillating or pitching wings, has been identified recently to dominate the unsteady lift generation. The LEV formation and growth are, however, still not fully understood. In this study, the behavior of the LEV (under different flapping frequencies, amplitudes and phases) is studied first by using the unique multi-element hot-film sensor (MHFS) arrays, designed and fabricated at McGill. These on-surface MHFS and surface pressure measurements will be used to supplement the off-surface particle-image-velocimetry measurements of the flapping-wing tip vortex generation and its control (e.g., via the HDW tip-vortex control concept). It is our belief that these previously unavailable joint on- and off-surface flowfield measurements will not only advance our understanding of the complex flapping-wing MAV aerodynamics and propulsive efficiency, but also enable effective flapping-wing tip vortex control. The proposed experiments will also provide a good baseline for computation-fluid-dynamic validation.
Program
Discovery Grants Program - Individual
Recipient
Location
Quebec, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
RGPIN-2014-05406
Name nom
Lee, Tim
Department département
Mechanical Engineering
Organization id
61
Institution établissement
McGill University
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2015
Competition year année de concours
2014
Award amount
24000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
703
Area of application group en
Transportation systems and services
Area of application group fr
Services et systèmes de transport
Area of application en
Aerospace
Area of application fr
Aérospatial
Research subject code
2108
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Aerospace, aeronautical and automotive engineering
Research subject fr
Génie aérospatial, aéronautique et automobile
Partie
2
Nb partie
5
Application title
On the measurement, characterization and control of static-wing tip vortex flow and its extension to flapping wing
Keyword
NSERC
Application summary
Lift increment and drag reduction of aircraft have been persistently pursued by aerodynamicists and aircraft designers. As such, the reduction of wingtip vortices-generated lift-induced drag, including flight hazards, is therefore of great importance. The sharklet winglets and split winglets installed on A320NEO and B737MAX reinforce the significance of lift-induced drag reduction and the ensuing fuel-burn savings. Intensive study of the wingtip vortex and its control has been carried out at McGill University by the applicant (via 2009-2013 NSERC DG). In addition to the measurements and characterization of the tip vortex at low Reynolds numbers, the lift-induced drag is also computed, based on the cross-flow velocity measurements, which not only allows the evaluation of its contribution to the total drag but also serves as an indicative of the effectiveness of tip vortex flow control (alternative to the changes in the strength and size of the tip vortex). Meanwhile, different tip vortex control methods were also attempted. Among them, the tip-mounted non-slender half-delta wing (HDW), with a root chord smaller than 50% of the main wing, was found to have the greatest potential for effective vortex attenuation and induced-drag reduction. Surprising enough, the proposed HDW tip-vortex control is also capable of producing concurrent lift increment and stall delay. Further investigations are, however, needed to materialize its practical application.
The objectives of this proposed research, therefore, have two folds. The first part is to continue the study of the promising on-going tip-mounted HDW tip vortex control scheme. Extensive wind-tunnel measurements of the size, location and deflection (relative to the main wing) of the HDW, and the Reynolds number will be acquired. These measurements will enable us to realize a new and practical tip vortex control technique. The knowledge and findings learned from the static-wing tip vortex is then extended to the second part of this proposal; i.e., the study and control of the tip vortex generated by flapping wings. The flapping wing study has been an increased interest in micro-air vehicles (MAVs) due to their extraordinary maneuverability. However, in comparison with fixed-wing MAVs, the flapping-wing MAVs are more difficult due to the extraordinary complexity of the flapping motions (which produce both lift and thrust) and the ensuing flow phenomena. Furthermore, to add to the complexity, tip effects must be carefully considered. Fortunately, the leading-edge vortex (LEV), similar to that developed on oscillating or pitching wings, has been identified recently to dominate the unsteady lift generation. The LEV formation and growth are, however, still not fully understood. In this study, the behavior of the LEV (under different flapping frequencies, amplitudes and phases) is studied first by using the unique multi-element hot-film sensor (MHFS) arrays, designed and fabricated at McGill. These on-surface MHFS and surface pressure measurements will be used to supplement the off-surface particle-image-velocimetry measurements of the flapping-wing tip vortex generation and its control (e.g., via the HDW tip-vortex control concept). It is our belief that these previously unavailable joint on- and off-surface flowfield measurements will not only advance our understanding of the complex flapping-wing MAV aerodynamics and propulsive efficiency, but also enable effective flapping-wing tip vortex control. The proposed experiments will also provide a good baseline for computation-fluid-dynamic validation.