Grant: Engage Plus Grants Program
University of Calgary
$12,500.00
Enhancing CO2 uptake in Milled Carbons for Scaled-up Production of Value-Added Materials
FY 2015-16
Summary
The emission of carbon dioxide (CO2) gas is a global concern due to the strong link between CO2
concentrations in the atmosphere and global warming. Carbon Upcycling Technologies (CUT, formally JRE
Petroleum Services) is developing a technology that permanently combines CO2 with various types of carbon
precursor materials by employing an easily implemented milling process. The value-added product has
potential applications in enhancing the mechanical strength of cement, in water-purification membranes, or
potentially as an oxygen reduction catalyst support for fuel cells. CUT has teamed up with the Birss Group at
the University of Calgary to facilitate commercialization of this process. In our original NSERC ENGAGE
project with CUT, modified carbons were produced that achieved >20% mass gain using conventional (low)
energy milling of graphite in the presence of CO2 (5 atm), which is comparable to literature methods using
more costly, high energy milling techniques. It is now imperative to determine the long term stability of these
materials, improve CO2 uptake of lower cost starting materials relative to graphite, and assess scale up
potential. Specifically, critical information will be acquired as to whether CO2 uptake by lower cost
alternatives, e.g., petroleum coke, can be increased to the levels of graphite. In this work, milling conditions
will be re-optimized for scale up and additives such as fly ash, olivine, and carbon oxidation promotion
catalysts will be used to further enhance CO2 uptake, and the surface area of these materials will be increased
further to increase CO2 uptake. The results of this work will allow CUT to get closer to commercialization of
their proprietary process. The economic, social, environmental, and health benefits of this technology are
unquestionably global, but have specific significance for Canada in terms of addressing CO2 emissions and
increasing the value of low end products of the energy sector, such as petroleum coke and fly ash. In addition,
the by-products formed here represent a growing market that is currently limited by low production rates and
high cost, thus creating numerous manufacturing and engineering jobs in Canada.
Program
Engage Plus Grants Program
Recipient
Location
Alberta, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
485407-2015
Name nom
Birss, Viola
Department département
Chemistry
Organization id
11
Institution établissement
University of Calgary
Province en
Alberta
Province fr
Alberta
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2015
Competition year année de concours
2015
Award amount
12500
Program id
EGP2
Program name en
Engage Plus Grants Program
Program name fr
Programme de subvention d'engagement partenarial Plus
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1555
Committee name en
Prairie Internal Decision Committee
Committee name fr
Comité de décision interne pour les Prairies
Area of application code
1208
Area of application group en
Advancement of knowledge
Area of application group fr
Avancement des connaissances
Area of application en
Materials sciences
Area of application fr
Sciences des matériaux
Research subject code
3402
Research subject group en
Physical chemistry
Research subject group fr
Chimie physique
Research subject en
Surface and interfacial chemistry
Research subject fr
Chimie des surfaces et des interfaces
Partie
1
Nb partie
1
Application title
Enhancing CO2 uptake in Milled Carbons for Scaled-up Production of Value-Added Materials
Keyword
NSERC
Application summary
The emission of carbon dioxide (CO2) gas is a global concern due to the strong link between CO2
concentrations in the atmosphere and global warming. Carbon Upcycling Technologies (CUT, formally JRE
Petroleum Services) is developing a technology that permanently combines CO2 with various types of carbon
precursor materials by employing an easily implemented milling process. The value-added product has
potential applications in enhancing the mechanical strength of cement, in water-purification membranes, or
potentially as an oxygen reduction catalyst support for fuel cells. CUT has teamed up with the Birss Group at
the University of Calgary to facilitate commercialization of this process. In our original NSERC ENGAGE
project with CUT, modified carbons were produced that achieved >20% mass gain using conventional (low)
energy milling of graphite in the presence of CO2 (5 atm), which is comparable to literature methods using
more costly, high energy milling techniques. It is now imperative to determine the long term stability of these
materials, improve CO2 uptake of lower cost starting materials relative to graphite, and assess scale up
potential. Specifically, critical information will be acquired as to whether CO2 uptake by lower cost
alternatives, e.g., petroleum coke, can be increased to the levels of graphite. In this work, milling conditions
will be re-optimized for scale up and additives such as fly ash, olivine, and carbon oxidation promotion
catalysts will be used to further enhance CO2 uptake, and the surface area of these materials will be increased
further to increase CO2 uptake. The results of this work will allow CUT to get closer to commercialization of
their proprietary process. The economic, social, environmental, and health benefits of this technology are
unquestionably global, but have specific significance for Canada in terms of addressing CO2 emissions and
increasing the value of low end products of the energy sector, such as petroleum coke and fly ash. In addition,
the by-products formed here represent a growing market that is currently limited by low production rates and
high cost, thus creating numerous manufacturing and engineering jobs in Canada.