Canada Spends Logo

Explore our Budget 2026 analysis

Grant: Engage Grants Program

Ryerson University

$25,000.00

Direct comparison between horizontal and vertical ground-loop systems for a ground source heat pump system

FY 2012-13

Summary
The ground source heat pump (GSHP) system is an attractive alternative heating and cooling system for buildings, because of its high efficiency. For a ground source heat pump system, which utilizes the ground as the heat source or sink, a ground loop is installed to exchange heat. There are two ground loop configurations, namely: horizontal and vertical. There are pros and cons for each configuration. The horizontal ground loops are buried horizontally in trenches, usually down to about 2-m depth, and their installation costs are usually lower. Depending on the required ground-loop length, the required land area can be large; therefore, this configuration may not be applicable to urban environment. However, the vertical ground loops are installed vertically in boreholes, usually up to 75 m to 200 m in length, and their installation costs are usually higher. The vertical borehole fields usually occupy less land areas than the horizontal trench fields. Nonetheless, when land area is not a concern, as in suburban and country-side regions, both configurations can be used. There are a number of studies on each ground-loop configuration separately in the open literature. But none has both ground-loop configurations studied simultaneously with the same heat pump for a building. Therefore, in this unique collaborative project with GeoEnergy, in King, Ontario, the two ground-loop configurations will be studied side-by-side with the same heat pump for one of the archetype houses in Kortright Centre, in Vaughan, Ontario. This will eliminate the uncertainties due to different pipe length, different heat pump, different ground condition, different weather condition, different operating condition, etc. The project will lead to a clear comparison of the performance between the two ground-loop configurations, and will enable GeoEnergy and GSHP industry to offer concrete recommendation to their clients about which ground-loop configuration is superior in terms of energy and economic performance. In addition, the results can also be used to verify and improve existing ground-loop design tools and software.
Program
Engage Grants Program
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data

As published

Application id
439454-2012
Name nom
Leong, WeyHerng
Department département
Mechanical and Industrial Engineering
Organization id
43
Institution établissement
Ryerson University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2012
Competition year année de concours
2012
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
303
Area of application group en
Energy resources
Area of application group fr
Ressources d'énergie
Area of application en
Alternative energy resources
Area of application fr
Autres ressources d'énergie
Research subject code
2109
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Mechanical systems and instrumentation
Research subject fr
Instrumentation et systèmes mécaniques
Partie
1
Nb partie
1
Application title
Direct comparison between horizontal and vertical ground-loop systems for a ground source heat pump system
Keyword
NSERC
Application summary
The ground source heat pump (GSHP) system is an attractive alternative heating and cooling system for buildings, because of its high efficiency. For a ground source heat pump system, which utilizes the ground as the heat source or sink, a ground loop is installed to exchange heat. There are two ground loop configurations, namely: horizontal and vertical. There are pros and cons for each configuration. The horizontal ground loops are buried horizontally in trenches, usually down to about 2-m depth, and their installation costs are usually lower. Depending on the required ground-loop length, the required land area can be large; therefore, this configuration may not be applicable to urban environment. However, the vertical ground loops are installed vertically in boreholes, usually up to 75 m to 200 m in length, and their installation costs are usually higher. The vertical borehole fields usually occupy less land areas than the horizontal trench fields. Nonetheless, when land area is not a concern, as in suburban and country-side regions, both configurations can be used. There are a number of studies on each ground-loop configuration separately in the open literature. But none has both ground-loop configurations studied simultaneously with the same heat pump for a building. Therefore, in this unique collaborative project with GeoEnergy, in King, Ontario, the two ground-loop configurations will be studied side-by-side with the same heat pump for one of the archetype houses in Kortright Centre, in Vaughan, Ontario. This will eliminate the uncertainties due to different pipe length, different heat pump, different ground condition, different weather condition, different operating condition, etc. The project will lead to a clear comparison of the performance between the two ground-loop configurations, and will enable GeoEnergy and GSHP industry to offer concrete recommendation to their clients about which ground-loop configuration is superior in terms of energy and economic performance. In addition, the results can also be used to verify and improve existing ground-loop design tools and software.
Ryerson University - $25,000 Grant (2012-13) | Canada Spends