Grant: Engage Grants Program
Queen's University
$20,000.00
Automation of the sanding process for wood products
FY 2018-19
Summary
This is a proposal for a new collaboration between Queen's University (Prof. Brian Surgenor) and Stinson*Studios (Tamworth, Ontario). The objective is to automate the process of sanding a wooden bowl.*Stinson Studios is a woodworking business dating back to 1982. Their product is wooden bowls cut from tree*trunks and burls. One step in the production process involves the sanding the inner surface of a bowl with a*hand-held orbital sander. This is a physically demanding repetitive motion process. Each staff member is by*necessity limited to working for no more than 2 hours continuously. Over the years, two staff have developed*tendonitis in the elbow and the wrist, and have had to be reassigned. Current staff wear arm and wrist braces to*minimize the onset of tendonitis. Automating this step would provide for a safer and healthier workplace.*Production rates would also increase, possibly as high as a factor of five.*The specific aim of this proposal is to design a controller for a 6-axis serial robot to sand a bowl, and take the*place of the human operator. The process of sanding wood is similar to the polishing of metal, both set out to*eliminate scratches from the surface. There are expensive robot-based commercial systems available for the*polishing of aluminum, a common process in the aerospace industry. Thus, there is literature on the subject of*contour following and the polishing of metal. However, unlike aluminum, wood is a non-homogeneous and*more importantly, the geometry of each bowl is unique. Only one example could be found in the literature on*the subject of contour following and the sanding of wood. It is hypothesized that a hybrid controller with force*and position feedback could be used to: a) generate a tool path (with touch sensor as end effector) and b) sand*the inner bowl surface with generated tool path as guidance (with orbital sander as end effector). Taking a*vision guided robot approach is not feasible, due to the nature of the working environment.
Program
Engage Grants Program
Recipient
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
530912-2018
Name nom
Surgenor, Brian
Department département
Mechanical and Materials Engineering
Organization id
29
Institution établissement
Queen's University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2018
Competition year année de concours
2018
Award amount
20000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2100
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Mechanical engineering
Research subject fr
Génie mécanique
Partie
1
Nb partie
1
Application title
Automation of the sanding process for wood products
Keyword
NSERC
Application summary
This is a proposal for a new collaboration between Queen's University (Prof. Brian Surgenor) and Stinson*Studios (Tamworth, Ontario). The objective is to automate the process of sanding a wooden bowl.*Stinson Studios is a woodworking business dating back to 1982. Their product is wooden bowls cut from tree*trunks and burls. One step in the production process involves the sanding the inner surface of a bowl with a*hand-held orbital sander. This is a physically demanding repetitive motion process. Each staff member is by*necessity limited to working for no more than 2 hours continuously. Over the years, two staff have developed*tendonitis in the elbow and the wrist, and have had to be reassigned. Current staff wear arm and wrist braces to*minimize the onset of tendonitis. Automating this step would provide for a safer and healthier workplace.*Production rates would also increase, possibly as high as a factor of five.*The specific aim of this proposal is to design a controller for a 6-axis serial robot to sand a bowl, and take the*place of the human operator. The process of sanding wood is similar to the polishing of metal, both set out to*eliminate scratches from the surface. There are expensive robot-based commercial systems available for the*polishing of aluminum, a common process in the aerospace industry. Thus, there is literature on the subject of*contour following and the polishing of metal. However, unlike aluminum, wood is a non-homogeneous and*more importantly, the geometry of each bowl is unique. Only one example could be found in the literature on*the subject of contour following and the sanding of wood. It is hypothesized that a hybrid controller with force*and position feedback could be used to: a) generate a tool path (with touch sensor as end effector) and b) sand*the inner bowl surface with generated tool path as guidance (with orbital sander as end effector). Taking a*vision guided robot approach is not feasible, due to the nature of the working environment.