Grant: Discovery Grants Program - Individual
Université Laval
$27,000.00
Rapidly Deployable Cable-Driven Parallel Robots
FY 2021-22
Summary
Cable--driven parallel robots (CDPRs) consist of an end effector suspended by a number of cables. Each cable is wound onto a servo-actuated spool, which is rigidly attached to a fixed frame. The end-effector displacements are controlled by simultaneously winding or unwinding the cables on their respective spools. Our interest in CDPRs stems from four advantages they hold over classical rigid-link robots: large workspaces; low cost; high speeds and accelerations; portability and reconfigurability. In our opinion, this latter advantage, the portability and reconfigurability of CDPRs, has been relatively neglected in previous research. We believe that this could be significantly improved by solving three problems: (1-2) making the CDPR calibration fully autonomous (3) designing new spools that can be mounted on towers rather than buttressed structures and (4-5) quickly tracing and certifying their workspace. The hardware will not have to be rebuilt from scratch for each project, because a dynamically reconfigurable CDPR is available at the Laboratoire de robotique. In projects (1-2), we will devise a mathematical method that allows to identify the CDPR mechanical model without the prior estimate of its parameters required by current calibration methods. Measuring the dimensions of a newly deployed cable robot is time consuming and constitutes an important limitation to its portability. The proposed method will be demonstrated through the dynamically reconfigurable CDPR already available and by designing a new highly portable lightweight CDPR. Project (3) was established from the observation that current CDPRs resemble more gantry cranes than tower cranes. To minimise the CDPR structure, we want to attach its spools on towers free of large buttresses, stabilisers or tethers. We will achieve this objective by cancelling the moment induced at the base of the tower by the cable tension applied at its top. A moving counterweight driven by the winch and cable direction will be used to cancel the moment. We will demonstrate this concept on a two--degree--of-freedom cable--suspended parallel robot in the vertical plane. In projects (4-5), we wish to develop faster methods for tracing and certifying the wrench-feasible workspace of CDPRs. The fastest available methods for tracing the workspace are based on line search, following rays emanating from a point until they intersect the workspace surface. We will propose a method where a path is followed along the workspace surface by using a predictor-corrector scheme. This method should be faster, as every point predicted along the path will be close to the true workspace surface, ensuring a fast correction step. As this type of workspace tracing method is not guaranteed to find the whole workspace, we will also develop a certification method. This method will consist in a branch-and-prune algorithm in which the lower bounds are computed through convex relaxations.
Program
Discovery Grants Program - Individual
Recipient
Location
Quebec, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
RGPIN-2021-03294
Name nom
Cardou, Philippe
Department département
Génie mécanique - Génie mécanique
Organization id
51
Institution établissement
Université Laval
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2021
Competition year année de concours
2021
Award amount
27000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
304
Area of application group en
Energy resources
Area of application group fr
Ressources d'énergie
Area of application en
Electrical energy
Area of application fr
Énergie électrique
Research subject code
2602
Research subject group en
Robotics
Research subject group fr
Robotique
Research subject en
Flexible robots
Research subject fr
Robots articulés
Installment
inst:1
Partie
1
Nb partie
5
Application title
Rapidly Deployable Cable-Driven Parallel Robots
Keyword
NSERC
Application summary
Cable--driven parallel robots (CDPRs) consist of an end effector suspended by a number of cables. Each cable is wound onto a servo-actuated spool, which is rigidly attached to a fixed frame. The end-effector displacements are controlled by simultaneously winding or unwinding the cables on their respective spools. Our interest in CDPRs stems from four advantages they hold over classical rigid-link robots: large workspaces; low cost; high speeds and accelerations; portability and reconfigurability. In our opinion, this latter advantage, the portability and reconfigurability of CDPRs, has been relatively neglected in previous research. We believe that this could be significantly improved by solving three problems: (1-2) making the CDPR calibration fully autonomous (3) designing new spools that can be mounted on towers rather than buttressed structures and (4-5) quickly tracing and certifying their workspace. The hardware will not have to be rebuilt from scratch for each project, because a dynamically reconfigurable CDPR is available at the Laboratoire de robotique. In projects (1-2), we will devise a mathematical method that allows to identify the CDPR mechanical model without the prior estimate of its parameters required by current calibration methods. Measuring the dimensions of a newly deployed cable robot is time consuming and constitutes an important limitation to its portability. The proposed method will be demonstrated through the dynamically reconfigurable CDPR already available and by designing a new highly portable lightweight CDPR. Project (3) was established from the observation that current CDPRs resemble more gantry cranes than tower cranes. To minimise the CDPR structure, we want to attach its spools on towers free of large buttresses, stabilisers or tethers. We will achieve this objective by cancelling the moment induced at the base of the tower by the cable tension applied at its top. A moving counterweight driven by the winch and cable direction will be used to cancel the moment. We will demonstrate this concept on a two--degree--of-freedom cable--suspended parallel robot in the vertical plane. In projects (4-5), we wish to develop faster methods for tracing and certifying the wrench-feasible workspace of CDPRs. The fastest available methods for tracing the workspace are based on line search, following rays emanating from a point until they intersect the workspace surface. We will propose a method where a path is followed along the workspace surface by using a predictor-corrector scheme. This method should be faster, as every point predicted along the path will be close to the true workspace surface, ensuring a fast correction step. As this type of workspace tracing method is not guaranteed to find the whole workspace, we will also develop a certification method. This method will consist in a branch-and-prune algorithm in which the lower bounds are computed through convex relaxations.