Grant: Engage Grants Program
University of Waterloo
$25,000.00
Microfabrication of mold for injection molding
FY 2013-14
Summary
Injection molding is a molding process for producing parts mostly in plastic material. In the process, material for the part is fed into a heated barrel, mixed, and forced into a mold where it cools and hardens to the configuration of the mold cavity or surface relief pattern. It has a very broad application ranging from tooth brush, DVD/Blu-ray disk, cosmetic/pharmaceutical packaging, to biomedical devices such as scaffolds and micro-needles. More recently, injection molding is applied for the fabrication of microfluidic devices and drug delivery. The key advantage for injection mold is its low cost and high throughput, compared to other competing techniques such as hot embossing.Injection molding is ideally suited for high volume (thousands of parts) production. In addition to the cost for the equipment, the major cost is the fabrication of the mold insert, because each mold is utilized for only one particular application. Therefore the initial cost is great; however the per-piece cost is low when with great quantities. Typical molds are constructed from metals including hardened steel, pre-hardened steel, aluminum, or beryllium-copper alloy; and are made by precise machining or electroforming. The price for the mold insert making is very high, often going above $5000 depending on the complexity of the mold design.The supporting company, Micromolding Solutions, received every year many requests from its customers for low-volume production of a plastic parts. One popular request is the fabrication of microfluidic devices, at a quantity of less than 100 devices. For this scale of production, it is not cost-effective to have a metal mold insert made using the conventional method. Therefore, in order to keep the per-device fabrication cost low, alternative mold fabrication methods and/or alternative mold materials have to be developed. In this project, our objective is to develop the alternative mold insert fabrication method using clean room micro-fabrication facilities (photo-lithography and thin film deposition/etching); and the mold materials will be fluoro-containing polymer and silicon.
Program
Engage Grants Program
Recipient
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
452681-2013
Name nom
Cui, Bo
Department département
Electrical & Computer Engineering
Organization id
33
Institution établissement
University of Waterloo
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2013
Competition year année de concours
2013
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
1206
Area of application group en
Advancement of knowledge
Area of application group fr
Avancement des connaissances
Area of application en
Engineering
Area of application fr
Génie
Research subject code
2523
Research subject group en
Electrical and electronic engineering
Research subject group fr
Génie électrique et électronique
Research subject en
Semiconductor fabrication and packaging
Research subject fr
Fabrication et mise sous enveloppe de semi-conducteurs
Partie
1
Nb partie
1
Application title
Microfabrication of mold for injection molding
Keyword
NSERC
Application summary
Injection molding is a molding process for producing parts mostly in plastic material. In the process, material for the part is fed into a heated barrel, mixed, and forced into a mold where it cools and hardens to the configuration of the mold cavity or surface relief pattern. It has a very broad application ranging from tooth brush, DVD/Blu-ray disk, cosmetic/pharmaceutical packaging, to biomedical devices such as scaffolds and micro-needles. More recently, injection molding is applied for the fabrication of microfluidic devices and drug delivery. The key advantage for injection mold is its low cost and high throughput, compared to other competing techniques such as hot embossing.Injection molding is ideally suited for high volume (thousands of parts) production. In addition to the cost for the equipment, the major cost is the fabrication of the mold insert, because each mold is utilized for only one particular application. Therefore the initial cost is great; however the per-piece cost is low when with great quantities. Typical molds are constructed from metals including hardened steel, pre-hardened steel, aluminum, or beryllium-copper alloy; and are made by precise machining or electroforming. The price for the mold insert making is very high, often going above $5000 depending on the complexity of the mold design.The supporting company, Micromolding Solutions, received every year many requests from its customers for low-volume production of a plastic parts. One popular request is the fabrication of microfluidic devices, at a quantity of less than 100 devices. For this scale of production, it is not cost-effective to have a metal mold insert made using the conventional method. Therefore, in order to keep the per-device fabrication cost low, alternative mold fabrication methods and/or alternative mold materials have to be developed. In this project, our objective is to develop the alternative mold insert fabrication method using clean room micro-fabrication facilities (photo-lithography and thin film deposition/etching); and the mold materials will be fluoro-containing polymer and silicon.