Canada Spends Logo

Explore our Budget 2026 analysis

Grant: Discovery Grants Program - Individual

University of Waterloo

$24,000.00

Models for thermal contact resistance metal polymer interface models for friction and heat transfer for microchannels

FY 2011-12

Summary
Advances in functionality, speed, and performance of all microelectronic devices such as cell phones, notebooks, and high end servers have resulted in significant increases in heat which is produced at the device level. The heat must cross many interfaces formed by different materials (e.g. metal/metal, metal/polymer, polymer/polymer) before it is dissipated into the ambient through heat sinks. To ensure continuous functionality, the temperature of the devices must be maintained below certain critical levels. This requires the overall thermal resistance from the device to the ambient to be reduced and maintained at low levels over long periods of time. The overall resistance consists of several spreading-constriction and contact resistances in series arrangement. The thermal resistance of the heat sink is an important part of the overall resistance budget. Experimental research is being done to reduce the thermal resistance and the pressure drop of heat sinks by novel designs, and the use of new materials and cooling fluids. It is proposed to replace the conventional heat sinks with a system of microchannels of noncircular cross section such as trapezoidal or double trapezoidal which are etched into silicon. The hydraulic diameter of the microchannels is about 100 micrometers and the length may be several millimeters. Preliminary experimental results for microchannels show that they can outperform pin fin heat sinks by a factor of 2-3. However, little is known about the underlying transport mechanisms and whether the friction and heat transfer correlation equations developed for macrochannels are applicable for microchannels. All Canadian microelectronics companies are facing these severe thermal and hydraulic problems. The proposed experimental and modeling research has two parts: 1) Research on thermal spreading and contact resistances with different metal/polymer interfaces will yield accurate data, correlations and models for predicting the interface resistances. The data and correlations can be used by industries to rank the polymers. 2) Research on fluid flow and heat transfer in microchannels will produce thermofluids models and correlations to predict friction factor, pressure drop, and heat transfer correlations.
Program
Discovery Grants Program - Individual
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data

As published

Application id
7445-2010
Name nom
Yovanovich, Milan
Department département
Mechanical Engineering and Mechatronics
Organization id
33
Institution établissement
University of Waterloo
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2011
Competition year année de concours
2010
Award amount
24000
Program id
RGPIN
Program nane en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
405
Area of application group en
Environment
Area of application group fr
Environnement
Area of application en
Modelling and mathematical simulation of natural processes
Area of application fr
Modélisation et simulation mathématique des processus naturels
Research subject code
2107
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Modelling, simulation and finite element methods
Research subject fr
Modélisation, simulation et méthodes des éléments finis
Partie
2
Nb partie
5
Application title
Models for thermal contact resistance metal polymer interface models for friction and heat transfer for microchannels
Keyword
NSERC
Application summary
Advances in functionality, speed, and performance of all microelectronic devices such as cell phones, notebooks, and high end servers have resulted in significant increases in heat which is produced at the device level. The heat must cross many interfaces formed by different materials (e.g. metal/metal, metal/polymer, polymer/polymer) before it is dissipated into the ambient through heat sinks. To ensure continuous functionality, the temperature of the devices must be maintained below certain critical levels. This requires the overall thermal resistance from the device to the ambient to be reduced and maintained at low levels over long periods of time. The overall resistance consists of several spreading-constriction and contact resistances in series arrangement. The thermal resistance of the heat sink is an important part of the overall resistance budget. Experimental research is being done to reduce the thermal resistance and the pressure drop of heat sinks by novel designs, and the use of new materials and cooling fluids. It is proposed to replace the conventional heat sinks with a system of microchannels of noncircular cross section such as trapezoidal or double trapezoidal which are etched into silicon. The hydraulic diameter of the microchannels is about 100 micrometers and the length may be several millimeters. Preliminary experimental results for microchannels show that they can outperform pin fin heat sinks by a factor of 2-3. However, little is known about the underlying transport mechanisms and whether the friction and heat transfer correlation equations developed for macrochannels are applicable for microchannels. All Canadian microelectronics companies are facing these severe thermal and hydraulic problems. The proposed experimental and modeling research has two parts: 1) Research on thermal spreading and contact resistances with different metal/polymer interfaces will yield accurate data, correlations and models for predicting the interface resistances. The data and correlations can be used by industries to rank the polymers. 2) Research on fluid flow and heat transfer in microchannels will produce thermofluids models and correlations to predict friction factor, pressure drop, and heat transfer correlations.