Grant: Engage Grants Program
University of New Brunswick
$25,000.00
Improvement in dissolving pulp production based on the acid sulfite process
FY 2012-13
Summary
This project is to improve the sulfite- based dissolving pulp production process with increased production
efficiency. The dissolving pulp sector has received much attention recently. At the present time there are at
least 5 commercial operations in Canada, and there are a number of new projects that have been recently
announced. It is estimated that by 2015 the Canadian dissolving pulp capacity will be about 2 million tons. The
proposed project will be carried out in collaboration with Neucel Specialty Cellulose.
Neucel Specialty Cellulose, located in Port Alice, British Columbia, is one of the leading global
manufacturers of dissolving pulp. Dissolving pulp is made from wood with a very high alpha-cellulose content
(90 percent and over). This type of pulp is always bleached and is the raw material to produce products such as
rayon, cellulose acetate, nitrate and ether, which are used to manufacture products such as synthetic fibres,
plastic materials, lacquers and explosives. Neucel has had some process/ operational problems; among them
the large variation in solids content in its red liquor recovery boiler is most noticeable. The current solids
content varies from 45% to 55%, which is significantly outside its target range of 51 - 53%, causing a series of
negative consequences in the processes, such as the boiler operation, steam/ heat generation, which can lead to
disruption of the entire production line. The mill has prioritized this as the number one project in the near term
in order to improve its operation efficiency. In this project, Dr. Ni and his team at the University of New
Brunswick will collaborate with the mill team at Neucel Specialty Cellulose to optimize the recovery boiler
operation by 1) determining/ monitoring the solids content of the concentrated red liquor, 2) providing practical
solutions to the variations in the solids content of the concentrated red liquor that is fired to the boiler. Under
the project we will: 1) collect data from three evaporation lines (Lines A, B and C), 2) establish a database on
the solids content of the three lines, 3) analyze/ determine the source of variation. An on-line solids content
monitoring system, as well as other practical solutions will be proposed and implemented in the process.
Program
Engage Grants Program
Recipient
Location
New Brunswick, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
445561-2012
Name nom
Ni, Yonghao
Department département
Chemical Engineering
Organization id
75
Institution établissement
University of New Brunswick
Province en
New Brunswick
Province fr
Nouveau-Brunswick
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2012
Competition year année de concours
2012
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1551
Committee name en
Atlantic Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Atlantique
Area of application code
502
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Fibres and textiles
Area of application fr
Fibres et textiles
Research subject code
1604
Research subject group en
Industrial engineering
Research subject group fr
Génie industriel
Research subject en
Manufacturing
Research subject fr
Fabrication
Partie
1
Nb partie
1
Application title
Improvement in dissolving pulp production based on the acid sulfite process
Keyword
NSERC
Application summary
This project is to improve the sulfite- based dissolving pulp production process with increased production
efficiency. The dissolving pulp sector has received much attention recently. At the present time there are at
least 5 commercial operations in Canada, and there are a number of new projects that have been recently
announced. It is estimated that by 2015 the Canadian dissolving pulp capacity will be about 2 million tons. The
proposed project will be carried out in collaboration with Neucel Specialty Cellulose.
Neucel Specialty Cellulose, located in Port Alice, British Columbia, is one of the leading global
manufacturers of dissolving pulp. Dissolving pulp is made from wood with a very high alpha-cellulose content
(90 percent and over). This type of pulp is always bleached and is the raw material to produce products such as
rayon, cellulose acetate, nitrate and ether, which are used to manufacture products such as synthetic fibres,
plastic materials, lacquers and explosives. Neucel has had some process/ operational problems; among them
the large variation in solids content in its red liquor recovery boiler is most noticeable. The current solids
content varies from 45% to 55%, which is significantly outside its target range of 51 - 53%, causing a series of
negative consequences in the processes, such as the boiler operation, steam/ heat generation, which can lead to
disruption of the entire production line. The mill has prioritized this as the number one project in the near term
in order to improve its operation efficiency. In this project, Dr. Ni and his team at the University of New
Brunswick will collaborate with the mill team at Neucel Specialty Cellulose to optimize the recovery boiler
operation by 1) determining/ monitoring the solids content of the concentrated red liquor, 2) providing practical
solutions to the variations in the solids content of the concentrated red liquor that is fired to the boiler. Under
the project we will: 1) collect data from three evaporation lines (Lines A, B and C), 2) establish a database on
the solids content of the three lines, 3) analyze/ determine the source of variation. An on-line solids content
monitoring system, as well as other practical solutions will be proposed and implemented in the process.