Grant: Engage Grants Program
Université du Québec à Montréal
$21,927.00
Low-cost transmission of high definition video signals over twisted pair cable
FY 2010-11
Summary
The High-Definition Multimedia Interface (HDMI) is the main industry-supported, all-digital interface for use
with audio/video (A/V) consumer electronics. The most recent standard, namely HDMI 1.4 offers data rates of
up to 10.2 Gbps, more than twice the bandwidth needed to transmit a 1080p signal, such as the output from a
Blu-ray Disc player. HDMI signal transmission requires specialised cabling which can provide the large signal
bandwidth required to route relatively high frequency clocks of up to 340 MHz. Therefore, HDMI cables are
relatively costly and are not typically part of the cabling infrastructure in buildings. In addition, because of the
high rate data transmission, the signal range is limited to below 15 meters without the use of active repeaters.
As such, long range transmission is cost prohibitive, and motivates a solution for transmitting HDMI signals
with cheaper cables and over longer distances. Notably, unshielded category 5 (Cat5) cabling is largely used for
connecting local computer networks and many buildings already benefit from a Cat5 infrastructure.
The prevalence and low cost of Cat5 cabling make it an attractive solution for the transmission of HDMI
signals. However, adapting the HDMI signal to be transmitted over a single Cat5 cable is not straightforward
without innovative solutions and involves interesting challenges. The objective of this project is to develop an
1080p HDMI signal to Cat5 transmitter and a Cat5 to HDMI receiver. The HDMI signal should be transmitted
over Cat5 cables with a range of up to 100 meters. The project aims to develop a communication framework
suited for HDMI signal transmission over a single Cat5 cable. (Field-programmable gate array) FPGA-based
prototypes will be designed to implement this framework, and will be tested with common HDMI devices.
The industrial partner, MuxLab, has high expectations of this project since MuxLab is very interested in
developing its own solution, at a lower cost that does not rely on a custom integrated circuit (IC), but on
widespread FPGAs and ICs. The ensuing products will be economically beneficial and they are in line with the
product strategy developed by our Canadian industrial partner, MuxLab, in the past.
Program
Engage Grants Program
Recipient
Location
Quebec, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
401093-2010
Name nom
Ajib, Wessam
Department département
Informatique
Organization id
57
Institution établissement
Université du Québec à Montréal
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2010
Competition year année de concours
2010
Award amount
21927
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1552
Committee name en
Quebec Internal Decision Committee
Committee name fr
Comité de décision interne pour le Québec
Area of application code
514
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Communications equipment
Area of application fr
Matériel de télécommunications
Research subject code
2513
Research subject group en
Electrical and electronic engineering
Research subject group fr
Génie électrique et électronique
Research subject en
Data communications
Research subject fr
Transmission des données
Partie
1
Nb partie
1
Application title
Low-cost transmission of high definition video signals over twisted pair cable
Keyword
NSERC
Application summary
The High-Definition Multimedia Interface (HDMI) is the main industry-supported, all-digital interface for use
with audio/video (A/V) consumer electronics. The most recent standard, namely HDMI 1.4 offers data rates of
up to 10.2 Gbps, more than twice the bandwidth needed to transmit a 1080p signal, such as the output from a
Blu-ray Disc player. HDMI signal transmission requires specialised cabling which can provide the large signal
bandwidth required to route relatively high frequency clocks of up to 340 MHz. Therefore, HDMI cables are
relatively costly and are not typically part of the cabling infrastructure in buildings. In addition, because of the
high rate data transmission, the signal range is limited to below 15 meters without the use of active repeaters.
As such, long range transmission is cost prohibitive, and motivates a solution for transmitting HDMI signals
with cheaper cables and over longer distances. Notably, unshielded category 5 (Cat5) cabling is largely used for
connecting local computer networks and many buildings already benefit from a Cat5 infrastructure.
The prevalence and low cost of Cat5 cabling make it an attractive solution for the transmission of HDMI
signals. However, adapting the HDMI signal to be transmitted over a single Cat5 cable is not straightforward
without innovative solutions and involves interesting challenges. The objective of this project is to develop an
1080p HDMI signal to Cat5 transmitter and a Cat5 to HDMI receiver. The HDMI signal should be transmitted
over Cat5 cables with a range of up to 100 meters. The project aims to develop a communication framework
suited for HDMI signal transmission over a single Cat5 cable. (Field-programmable gate array) FPGA-based
prototypes will be designed to implement this framework, and will be tested with common HDMI devices.
The industrial partner, MuxLab, has high expectations of this project since MuxLab is very interested in
developing its own solution, at a lower cost that does not rely on a custom integrated circuit (IC), but on
widespread FPGAs and ICs. The ensuing products will be economically beneficial and they are in line with the
product strategy developed by our Canadian industrial partner, MuxLab, in the past.