Grant: Discovery Grants Program - Individual
University of Saskatchewan
$54,000.00
Deep X-Ray Lithography for High Aspect Ratio Polymer Micro Structures
FY 2023-24
Summary
Micro-electro-mechanical systems (MEMS) increasingly replace macroscopic devices for improved performance. Many MEMS processes to date are silicon-based and support a planar architecture. Extending the materials selection and increasing the structural height to enable a vertical-wall architecture would allow, e. g., higher throughput micro reactors or higher sensitivity micro sensors. Deep X-ray lithography (XRL) can theoretically produce such high quality polymer or metal microstructures. They can have a large structural height (up to millimeters) and optically smooth, vertical sidewalls. The aspect ratio, defined as the structural height relative to the minimum lateral dimensions, can exceed 100:1. XRL, however, requires synchrotron radiation from an electron storage ring and is an extremely complex process. Its full potential is far from being reached, and XRL therefore still remains a niche technology with limited availability. The overarching question of my research is how we can contribute to fundamental improvements of XRL process technologies to allow for widespread application in the fabrication of high quality micro devices. This drives my objectives over the next 5 years to innovate XRL processing by developing high quality and rapid prototyping XRL mask making processes, and to apply these capabilities in the microfabrication of advanced X-ray optical elements and radio frequency (RF) MEMS. To achieve these goals, we will use the world-unique capabilities of my lab SyLMAND, the Synchrotron Laboratory for Micro and Nano Devices at the Canadian Light Source in Saskatoon, which I had designed to overcome pre-existing bottlenecks in XRL process capabilities and which started operations last year. Pursuing our goals is also based on our recently developed disruptive new XRL mask fabrication technology to improve fabrication timelines and cost by about an order of magnitude. We will develop a high resolution XRL mask technology that increases the achievable lateral resolution and vertical structure height of our XRL devices by about an order of magnitude each. This is a precondition to innovate X-ray optical elements using XRL techniques to focus synchrotron radiation for analysis in basic science and technology. Applications areas of such ultra high aspect ratio refractive lenses and zone plates include environmental and biological sciences and material design. Another outcome will be the fabrication of vertical wall RF MEMS components where smooth, high aspect ratio sidewalls are utilized to collaboratively develop wireless devices. We will demonstrate an advanced integrated, compact mm-wave artificial antenna array suitable for the emerging 5G wireless application standard used in, e.g., next-generation cell phones. In executing this research program, 7 HQP will be trained to fill demand of experts in key technologies such as materials development and communications technologies.
Program
Discovery Grants Program - Individual
Recipient
Location
Saskatchewan, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
RGPIN-2019-06009
Name nom
Achenbach, Sven
Department département
Electrical and Computer Engineering
Organization id
16
Institution établissement
University of Saskatchewan
Province en
Saskatchewan
Province fr
Saskatchewan
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2023
Competition year année de concours
2019
Award amount
54000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
DISCOVERY RESEARCH
Group fr
RECHERCHE AXÉE SUR LA DÉCOUVERTE
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
519
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Other manufactured products and processes
Area of application fr
Autres produits et procédés de fabrication
Research subject code
2109
Research subject group en
Mechanical engineering
Research subject group fr
Mechanical systems and instrumentation
Research subject en
Génie mécanique
Research subject fr
Instrumentation et systèmes mécaniques
Application title
Deep X-Ray Lithography for High Aspect Ratio Polymer Micro Structures
Keyword
direct write laser lithography; high aspect ratio; mask fabrication; micro/nano fabrication technology; micro optics; polymer patterning; process technology; RF MEMS; X-ray lithography; x-ray optics
Application summary
Micro-electro-mechanical systems (MEMS) increasingly replace macroscopic devices for improved performance. Many MEMS processes to date are silicon-based and support a planar architecture. Extending the materials selection and increasing the structural height to enable a vertical-wall architecture would allow, e. g., higher throughput micro reactors or higher sensitivity micro sensors. Deep X-ray lithography (XRL) can theoretically produce such high quality polymer or metal microstructures. They can have a large structural height (up to millimeters) and optically smooth, vertical sidewalls. The aspect ratio, defined as the structural height relative to the minimum lateral dimensions, can exceed 100:1. XRL, however, requires synchrotron radiation from an electron storage ring and is an extremely complex process. Its full potential is far from being reached, and XRL therefore still remains a niche technology with limited availability. The overarching question of my research is how we can contribute to fundamental improvements of XRL process technologies to allow for widespread application in the fabrication of high quality micro devices. This drives my objectives over the next 5 years to innovate XRL processing by developing high quality and rapid prototyping XRL mask making processes, and to apply these capabilities in the microfabrication of advanced X-ray optical elements and radio frequency (RF) MEMS. To achieve these goals, we will use the world-unique capabilities of my lab SyLMAND, the Synchrotron Laboratory for Micro and Nano Devices at the Canadian Light Source in Saskatoon, which I had designed to overcome pre-existing bottlenecks in XRL process capabilities and which started operations last year. Pursuing our goals is also based on our recently developed disruptive new XRL mask fabrication technology to improve fabrication timelines and cost by about an order of magnitude. We will develop a high resolution XRL mask technology that increases the achievable lateral resolution and vertical structure height of our XRL devices by about an order of magnitude each. This is a precondition to innovate X-ray optical elements using XRL techniques to focus synchrotron radiation for analysis in basic science and technology. Applications areas of such ultra high aspect ratio refractive lenses and zone plates include environmental and biological sciences and material design. Another outcome will be the fabrication of vertical wall RF MEMS components where smooth, high aspect ratio sidewalls are utilized to collaboratively develop wireless devices. We will demonstrate an advanced integrated, compact mm-wave artificial antenna array suitable for the emerging 5G wireless application standard used in, e.g., next-generation cell phones. In executing this research program, 7 HQP will be trained to fill demand of experts in key technologies such as materials development and communications technologies.