Canada Spends Logo

Explore our Budget 2026 analysis

Grant: Strategic Projects Supplemental Competition

École Polytechnique de Montréal

$85,225.00

Development of new alcohol tolerant Pd-alloys cathodes for direct alcohol PEM fuel cells

FY 2007-08

Summary
We intend to develop new class of Membrane Electrode Assembly (MEA) for direct alcohol (methanol and ethanol) fuel cells (DAFC) based for the first time on two new concepts or directions: i) high tolerant alcohol cathodes based on Pd-alloy catalysts supported on carbon powder; ii) MEA of these catalysts which will be prepared from catalyzed electrode fabricated from direct deposition of the supported catalysts on the gas diffusion layer in the same furnace as the catalyst preparation. This is the first time that supported catalyst can be deposited directly on gas diffusion layer during the catalyst fabrication. Such fuel cells would be used for mobile, transportation or residential) applications. This project is highly original and novel because it is the first time that: i) direct alcohol (methanol and ethanol) fuel cell will be developed using high tolerant alcoholcathodes based on Pd-alloy catalysts supported on carbon; ii) MEA of these catalysts will be prepared using catalyzed electrodes fabricated from direct deposition of the supported catalysts on the carbon cloth or paper in the same furnace as the catalyst preparation. The keys to the success of this project will lie in finding ways of the fabrication of MEA based of optimised carbon supported Pd-alloys cathodes and Nafion? 117 to be effective for the structure of DAFC. Our strategies therefore, are to develop Pd-Co, Pd-Ni, Pd-Cr and Pd-Fe cathode and Pt-Ru anode catalysts on carbon support in a vertical furnace (homemade in our laboratory).The optimisation of the catalyst preparations and their deposition to get catalyzed electrodes for MEA of 6.25 cm2 will be done by considering the following parameters of its performance in a single DEFC hardware: i) open circuit voltage of 1.0 Volt (in comparison of an average of 0.6 Volt with the current technology); ii) improvethe single cell operating potential by (at least) 200 mV in comparison to those of the current technology for the same current density;iii) Analysis of the results on MEA performances and assessment of progress towards classical state-of-the-art results obtained on a standard single cell.
Program
Strategic Projects Supplemental Competition
Location
Quebec, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data

As published

Application id
356825-2007
Name nom
Savadogo, Oumarou
Department département
Génie chimique
Organization id
64
Institution établissement
École Polytechnique de Montréal
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2007
Competition year année de concours
2007
Award amount
85225
Program id
STPSC
Program name en
Strategic Projects Supplemental Competition
Program name fr
Projets stratégiques compétition supplémentaire
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1065
Committee name en
Strategic Projects Selection Panel - Energy 1
Committee name fr
Comité de sélection des projets stratégiques - Énergie 1
Area of application code
305
Area of application group en
Energy resources
Area of application group fr
Ressources d'énergie
Area of application en
Energy storage and conversion
Area of application fr
Stockage et transformation de l'énergie
Research subject code
2303
Research subject group en
Fuel and energy technology
Research subject group fr
Combustibles et technologie de l'énergie
Research subject en
Other sources of energy (solar, wind, etc.)
Research subject fr
Autres sources d'énergie (combustibles solaire, éolien, etc).
Partie
1
Nb partie
2
Application title
Development of new alcohol tolerant Pd-alloys cathodes for direct alcohol PEM fuel cells
Keyword
NA
Application summary
We intend to develop new class of Membrane Electrode Assembly (MEA) for direct alcohol (methanol and ethanol) fuel cells (DAFC) based for the first time on two new concepts or directions: i) high tolerant alcohol cathodes based on Pd-alloy catalysts supported on carbon powder; ii) MEA of these catalysts which will be prepared from catalyzed electrode fabricated from direct deposition of the supported catalysts on the gas diffusion layer in the same furnace as the catalyst preparation. This is the first time that supported catalyst can be deposited directly on gas diffusion layer during the catalyst fabrication. Such fuel cells would be used for mobile, transportation or residential) applications. This project is highly original and novel because it is the first time that: i) direct alcohol (methanol and ethanol) fuel cell will be developed using high tolerant alcoholcathodes based on Pd-alloy catalysts supported on carbon; ii) MEA of these catalysts will be prepared using catalyzed electrodes fabricated from direct deposition of the supported catalysts on the carbon cloth or paper in the same furnace as the catalyst preparation. The keys to the success of this project will lie in finding ways of the fabrication of MEA based of optimised carbon supported Pd-alloys cathodes and Nafion? 117 to be effective for the structure of DAFC. Our strategies therefore, are to develop Pd-Co, Pd-Ni, Pd-Cr and Pd-Fe cathode and Pt-Ru anode catalysts on carbon support in a vertical furnace (homemade in our laboratory).The optimisation of the catalyst preparations and their deposition to get catalyzed electrodes for MEA of 6.25 cm2 will be done by considering the following parameters of its performance in a single DEFC hardware: i) open circuit voltage of 1.0 Volt (in comparison of an average of 0.6 Volt with the current technology); ii) improvethe single cell operating potential by (at least) 200 mV in comparison to those of the current technology for the same current density;iii) Analysis of the results on MEA performances and assessment of progress towards classical state-of-the-art results obtained on a standard single cell.
École Polytechnique de Montréal - $85,225 Grant (2007… | Canada Spends