Grant: Discovery Grants Program - Individual
Carleton University
$22,000.00
Dynamically Coupled Systems
FY 2018-19
Summary
A major focus of the applicant's research program in the recent years has been the development of a realistic structural and dynamic model of a smart helicopter rotor blade that can be used to simulate dynamic behaviour of these blades with a high degree of fidelity. A continuous model of a smart rotor blade, without initial span-wise twist, was developed in the previous phase of this research program. This model that incorporates integrated piezoelectric fibres as Macro Fibre Composites (MFC) can be used to investigate the controllability of undesirable dynamic responses by using the piezoelectric actuators to influence the dynamic response of the blades. Building on the developments of the previous phase of this research program, the next phase will include the following objectives:*1. Investigate the capability and versatility of smart Macro-Fibre Composite (MFC) helicopter rotor blades to control Blade Sailing Phenomenon (BSP) in shipboard helicopters has been under investigation in my research group. During start-up and shut-down operations of helicopter rotor blades on ship decks, the elastic response of blades is of concern for flight safety and personnel reasons. While the rotors are being engaged or disengaged on a shipboard helicopter, at low speeds of rotation they can be subjected to high wind-induced aerodynamic forces without the benefit of the centrifugal stiffening present at the higher normal operating speeds. This excitation combined with ship deck motion and wind conditions has the potential of resulting in excessive deformations in rotor blades that is referred to as the BSP. As the result, the rotor blades can come into contact with the fuselage or tailboom of the helicopter. This phenomenon, while resulting in substantial levels of airframe damage with the possibility of bringing the airworthiness of the vehicle into question, also compromises the safety of flight crew and the ship deck personnel quite seriously. To reduce the BSP, this research program will develop an active control strategy using active twist through embedded MFCs to augment passive control strategies, like increasing the collective pitch setting.*2) This program will also include optimization of the placement and configuration of the integrated MFC actuators in the blade to obtain the best actuation authority.*3) The existing development does not take into account the effect of initial twist that is present in most, if not all, modern helicopter rotor blades. A more realistic modelling of rotor blades requires the incorporation of such a feature in cross-sectional analysis.*4) The rotor blade model that is developed for rotorcrafts in the previous phase of this research program can now be further developed and applied to investigate the dynamic behaviour of horizontal axis wind turbine (HAWT) and to predict the power and torque developed in HAWT farms both off-shore and land-based.*
Program
Discovery Grants Program - Individual
Recipient
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
RGPIN-2015-06335
Name nom
Afagh, Fred
Department département
Mechanical & Aerospace Engineering
Organization id
23
Institution établissement
Carleton University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2018
Competition year année de concours
2015
Award amount
22000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
703
Area of application group en
Transportation systems and services
Area of application group fr
Services et systèmes de transport
Area of application en
Aerospace
Area of application fr
Aérospatial
Research subject code
2108
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Aerospace, aeronautical and automotive engineering
Research subject fr
Génie aérospatial, aéronautique et automobile
Partie
4
Nb partie
5
Application title
Dynamically Coupled Systems
Keyword
NSERC
Application summary
A major focus of the applicant's research program in the recent years has been the development of a realistic structural and dynamic model of a smart helicopter rotor blade that can be used to simulate dynamic behaviour of these blades with a high degree of fidelity. A continuous model of a smart rotor blade, without initial span-wise twist, was developed in the previous phase of this research program. This model that incorporates integrated piezoelectric fibres as Macro Fibre Composites (MFC) can be used to investigate the controllability of undesirable dynamic responses by using the piezoelectric actuators to influence the dynamic response of the blades. Building on the developments of the previous phase of this research program, the next phase will include the following objectives:*1. Investigate the capability and versatility of smart Macro-Fibre Composite (MFC) helicopter rotor blades to control Blade Sailing Phenomenon (BSP) in shipboard helicopters has been under investigation in my research group. During start-up and shut-down operations of helicopter rotor blades on ship decks, the elastic response of blades is of concern for flight safety and personnel reasons. While the rotors are being engaged or disengaged on a shipboard helicopter, at low speeds of rotation they can be subjected to high wind-induced aerodynamic forces without the benefit of the centrifugal stiffening present at the higher normal operating speeds. This excitation combined with ship deck motion and wind conditions has the potential of resulting in excessive deformations in rotor blades that is referred to as the BSP. As the result, the rotor blades can come into contact with the fuselage or tailboom of the helicopter. This phenomenon, while resulting in substantial levels of airframe damage with the possibility of bringing the airworthiness of the vehicle into question, also compromises the safety of flight crew and the ship deck personnel quite seriously. To reduce the BSP, this research program will develop an active control strategy using active twist through embedded MFCs to augment passive control strategies, like increasing the collective pitch setting.*2) This program will also include optimization of the placement and configuration of the integrated MFC actuators in the blade to obtain the best actuation authority.*3) The existing development does not take into account the effect of initial twist that is present in most, if not all, modern helicopter rotor blades. A more realistic modelling of rotor blades requires the incorporation of such a feature in cross-sectional analysis.*4) The rotor blade model that is developed for rotorcrafts in the previous phase of this research program can now be further developed and applied to investigate the dynamic behaviour of horizontal axis wind turbine (HAWT) and to predict the power and torque developed in HAWT farms both off-shore and land-based.*