Grant: Engage Grants Program
McMaster University
$25,000.00
IN-SITU INSPECTION OF TURBINE DISKS FOR SURFACE DEFECTS**
FY 2018-19
Summary
Pratt & Whitney Canada uses wire electrical discharge machining (WEDM) in the manufacture of turbine disks to very high tolerances. The disks are inspected manually for surface anomalies down to sub-millimetre scales. This project aims to develop a dynamic pneumatic sensor that can help automate this inspection process. Such a sensor system would be the dynamic equivalent of the pneumatic gauging technology that has long been used in industry for static/quasi-static measurement of fine displacement.* The device itself would consist of a sensitive piezo crystal-based pressure sensor measuring the back pressure on an air jet impinging through a nozzle on to the workpiece being examined. Variations in the surface would cause changes in the back-pressure measured. The challenge in this project is to tailor the geometry of the pneumatic sensor with a view to suppressing the inherent noise and tuning its dynamic performance, to render it sensitive enough to robustly detect and quantify surface anomalies of interest, at a relative speed that minimizes the time required for inspecting a disk.* A key advantage of the pneumatic sensor is that the air issuing from the nozzle can remove any debris or cutting fluid off the surface being inspected, which enables its in-situ application in a WEDM machine tool. The nozzle tip can further be of a curved geometry and be sub-millimetre in diameter, which allows for its use within the narrow confines of blade retention slots. * The deliverables in this project are: (1) a prototype pneumatic sensor with the geometry optimized to detect and quantify surface anomalies in WEDM-ed surfaces, and (2) any data analysis techniques required to appropriately process the back-pressure signal. By both improving the quality of inspections and reducing their cost, the proposed work is important in enabling PWC maintain its leadership position in the aero-engine industry, and help increase its market share in this research competitive market.*
Program
Engage Grants Program
Recipient
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
536258-2018
Name nom
Tullis, Stephen
Department département
Mechanical Engineering
Organization id
27
Institution établissement
McMaster University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2018
Competition year année de concours
2018
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
703
Area of application group en
Transportation systems and services
Area of application group fr
Services et systèmes de transport
Area of application en
Aerospace
Area of application fr
Aérospatial
Research subject code
2109
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Mechanical systems and instrumentation
Research subject fr
Instrumentation et systèmes mécaniques
Partie
1
Nb partie
1
Application title
IN-SITU INSPECTION OF TURBINE DISKS FOR SURFACE DEFECTS**
Keyword
NSERC
Application summary
Pratt & Whitney Canada uses wire electrical discharge machining (WEDM) in the manufacture of turbine disks to very high tolerances. The disks are inspected manually for surface anomalies down to sub-millimetre scales. This project aims to develop a dynamic pneumatic sensor that can help automate this inspection process. Such a sensor system would be the dynamic equivalent of the pneumatic gauging technology that has long been used in industry for static/quasi-static measurement of fine displacement.* The device itself would consist of a sensitive piezo crystal-based pressure sensor measuring the back pressure on an air jet impinging through a nozzle on to the workpiece being examined. Variations in the surface would cause changes in the back-pressure measured. The challenge in this project is to tailor the geometry of the pneumatic sensor with a view to suppressing the inherent noise and tuning its dynamic performance, to render it sensitive enough to robustly detect and quantify surface anomalies of interest, at a relative speed that minimizes the time required for inspecting a disk.* A key advantage of the pneumatic sensor is that the air issuing from the nozzle can remove any debris or cutting fluid off the surface being inspected, which enables its in-situ application in a WEDM machine tool. The nozzle tip can further be of a curved geometry and be sub-millimetre in diameter, which allows for its use within the narrow confines of blade retention slots. * The deliverables in this project are: (1) a prototype pneumatic sensor with the geometry optimized to detect and quantify surface anomalies in WEDM-ed surfaces, and (2) any data analysis techniques required to appropriately process the back-pressure signal. By both improving the quality of inspections and reducing their cost, the proposed work is important in enabling PWC maintain its leadership position in the aero-engine industry, and help increase its market share in this research competitive market.*