Grant: Discovery Grants Program - Individual
McMaster University
$23,000.00
Rheo-casting of Al based wrought and cast alloys via controlled diffusion solidification
FY 2013-14
Summary
CDS is a novel rheo-casting process to facilitate the net shaped castings of Al based wrought and cast alloys by Controlled Diffusion Solidification. The objectives of the first phase of this project were achieved and the knowledge base for the mechanisms involved in CDS and the control required on the processing parameters have been successfully developed. CDS as a process has also attracted significant interest from the automotive sector and specific projects to develop novel alloys for automotive parts have been initiated. The proposed second phase of this project will pursue the development of specific alloy chemistries and the process parameters required to process these alloys. Specific aluminum wrought alloys from the 2xxx, 3xxx, 4xxx, 5xxx, 6xxx and 7xxx alloy series will be developed for the the CDS process and cast into net shaped components and their mechanical and performance properties quantified. Two main processes will be used for this study: high pressure/squeeze die casting and tilt pour permanent mould casting. The process parameters identified as critical in the first phase of this project are melt superheats for the two precursor alloys, mass ratio of mixing, rate of pour of second alloy into the first alloy, wait time prior to casting the mixed alloy, mould pre-heat temperature. Each final desired alloy chemistry has a specific windows of operation for each and every process parameter mentioned above. The objectives of the proposed research program include the design and development of individual precursor alloys and optimize the above mentioned process parameters. The alloys being developed are specifically from 2xxx, 3xxx, 4xxx, 5xxx, 6xxx and 7xxx families of Al wrought alloys. The specific tasks are to quantify the effect of pouring method and rate of second alloy on the resultant microstructure and properties, optimize process conditions for high pressure/Squeeze die casting and tilt pour permanent mould casting processes for CDS, develop a guide book to present the specific detailed instructions on the procedure to cast various alloys by CDS, and evaluate mechanical properties such as Tensile, Fatigue, Creep and Wear for all the alloys being cast.
Program
Discovery Grants Program - Individual
Recipient
Location
Ontario, Canada
Recipient Type
Academia
Type
Grant
Source
NSERC's Awards Data
As published
Application id
311953-2009
Name nom
Shankar, Sumanth
Department département
Mechanical Engineering
Organization id
27
Institution établissement
McMaster University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2013
Competition year année de concours
2009
Award amount
23000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
4
Committee name en
Chem. & Metallurgical Eng.
Committee name fr
Génies chimique et métal.
Area of application code
1208
Area of application group en
Advancement of knowledge
Area of application group fr
Avancement des connaissances
Area of application en
Materials sciences
Area of application fr
Sciences des matériaux
Research subject code
2002
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials processing
Research subject fr
Transformation des matériaux
Partie
5
Nb partie
5
Application title
Rheo-casting of Al based wrought and cast alloys via controlled diffusion solidification
Keyword
NSERC
Application summary
CDS is a novel rheo-casting process to facilitate the net shaped castings of Al based wrought and cast alloys by Controlled Diffusion Solidification. The objectives of the first phase of this project were achieved and the knowledge base for the mechanisms involved in CDS and the control required on the processing parameters have been successfully developed. CDS as a process has also attracted significant interest from the automotive sector and specific projects to develop novel alloys for automotive parts have been initiated. The proposed second phase of this project will pursue the development of specific alloy chemistries and the process parameters required to process these alloys. Specific aluminum wrought alloys from the 2xxx, 3xxx, 4xxx, 5xxx, 6xxx and 7xxx alloy series will be developed for the the CDS process and cast into net shaped components and their mechanical and performance properties quantified. Two main processes will be used for this study: high pressure/squeeze die casting and tilt pour permanent mould casting. The process parameters identified as critical in the first phase of this project are melt superheats for the two precursor alloys, mass ratio of mixing, rate of pour of second alloy into the first alloy, wait time prior to casting the mixed alloy, mould pre-heat temperature. Each final desired alloy chemistry has a specific windows of operation for each and every process parameter mentioned above. The objectives of the proposed research program include the design and development of individual precursor alloys and optimize the above mentioned process parameters. The alloys being developed are specifically from 2xxx, 3xxx, 4xxx, 5xxx, 6xxx and 7xxx families of Al wrought alloys. The specific tasks are to quantify the effect of pouring method and rate of second alloy on the resultant microstructure and properties, optimize process conditions for high pressure/Squeeze die casting and tilt pour permanent mould casting processes for CDS, develop a guide book to present the specific detailed instructions on the procedure to cast various alloys by CDS, and evaluate mechanical properties such as Tensile, Fatigue, Creep and Wear for all the alloys being cast.