Grant: Collaborative Research and Development Grants
McGill University
$75,000.00
Effect of material characteristics and surface processing variables on hydrogen embrittlement of steel fasteners
EF 2005-06
Résumé
Fasteners are literally used in every industry from construction to automotive to aerospace. In such parts, the risk of failures caused by hydrogen embrittlement has always been a major concern, especially with higher strength fasteners. This failure can occur without warning, during service, with catastrophic consequences. Every precaution is being taken to avoid these types of failures. Unfortunately the measures taken in industry to contain this problem are not entirely effective. The aim of this project is to study the susceptibility of fastener materials to hydrogen embrittlement, primarily by incremental step load testing (ISL). This type of testing was originally developed for the aerospace industry, but is now being adopted to evaluate steel fasteners. In this test, a specimen is subjected to a static load, which is incrementally increased at fixed time intervals. Fracture eventually occurs at a certain load, which can then be used as a quantitative measure of crack susceptibility. By contrast, other tests only reveal whether or not fracture occurs after a certain fixed period of time under a specific load condition. The information is neither quantitative, nor can it be used to indicate susceptibility under any other load/time conditions. This new test therefore provides a valuable opportunity to rigorously investigate the variables that are considered to cause hydrogen embrittlement. In particular, the effect of steel composition and microstructure, as well as the influence of individual coating process variables on the extent of hydrogen embrittlement in coated parts will be studied. The results will be used, ultimately, to (i) design steels with compositions and microstructures with minimal hydrogen embrittlement susceptibility, and (ii) define processing conditions of coating and baking that will minimize or preferably eliminate internal hydrogen embrittlement. The fastener industry is part of the lucrative automotive parts sector, which is of considerable economic importance in Canada. The creation of a center of expertise in this subject would greatly enhance the ability of the Canadian industry to respond to the rapid changes in materials and design that are anticipated in the near future.
Programme
Collaborative Research and Development Grants
Bénéficiaire
Emplacement
Quebec, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
325260-2005
Name nom
Yue, Stephen
Department département
Mining, Metals & Materials Engineering
Organization id
61
Institution établissement
McGill University
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2005
Competition year année de concours
2005
Award amount
75000
Program id
CRDPJ
Program name en
Collaborative Research and Development Grants
Program name fr
Subventions de recherche et développement coopérative
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
96
Committee name en
RPP Internal Decision Cttee
Committee name fr
Cté de décision interne - PPR
Area of application code
602
Area of application group en
Construction, urban and rural planning
Area of application group fr
Construction, urbanisme et aménagement rural
Area of application en
Materials performance
Area of application fr
Performance des matériaux
Research subject code
2001
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials structure, properties and testing
Research subject fr
Structure, propriétés et essais des matériaux
Partie
1
Nb partie
3
Application title
Effect of material characteristics and surface processing variables on hydrogen embrittlement of steel fasteners
Keyword
NA
Application summary
Fasteners are literally used in every industry from construction to automotive to aerospace. In such parts, the risk of failures caused by hydrogen embrittlement has always been a major concern, especially with higher strength fasteners. This failure can occur without warning, during service, with catastrophic consequences. Every precaution is being taken to avoid these types of failures. Unfortunately the measures taken in industry to contain this problem are not entirely effective. The aim of this project is to study the susceptibility of fastener materials to hydrogen embrittlement, primarily by incremental step load testing (ISL). This type of testing was originally developed for the aerospace industry, but is now being adopted to evaluate steel fasteners. In this test, a specimen is subjected to a static load, which is incrementally increased at fixed time intervals. Fracture eventually occurs at a certain load, which can then be used as a quantitative measure of crack susceptibility. By contrast, other tests only reveal whether or not fracture occurs after a certain fixed period of time under a specific load condition. The information is neither quantitative, nor can it be used to indicate susceptibility under any other load/time conditions. This new test therefore provides a valuable opportunity to rigorously investigate the variables that are considered to cause hydrogen embrittlement. In particular, the effect of steel composition and microstructure, as well as the influence of individual coating process variables on the extent of hydrogen embrittlement in coated parts will be studied. The results will be used, ultimately, to (i) design steels with compositions and microstructures with minimal hydrogen embrittlement susceptibility, and (ii) define processing conditions of coating and baking that will minimize or preferably eliminate internal hydrogen embrittlement. The fastener industry is part of the lucrative automotive parts sector, which is of considerable economic importance in Canada. The creation of a center of expertise in this subject would greatly enhance the ability of the Canadian industry to respond to the rapid changes in materials and design that are anticipated in the near future.