Grant: Engage Grants Program
Concordia University
$25,000.00
Evaluation of Porosity in Composite Materials
EF 2016-17
Résumé
Composite materials have been used more and more to make many engineering structures such as aircrafts,wind turbines, automobiles, sports equipment etc. With their increasing use, new methods for manufacturinghave been developed, in an effort to increase the speed of production and to reduce cost. Two methods that aregaining popularity are the use of Out Of Autoclave (OOA) prepregs and the use of Automated CompositeManufacturing (ACM). By using OOA, the use of the autoclave for manufacturing is no longer necessary.Instead of an autoclave, only an oven is required. As such, larger ovens with odd shapes can be used, and largerstructures can be made at lower cost. On the other hand, with the advent of new machine such as automatedfiber placement (AFP), the speed of deposition of layers of composites can be greatly increased. Repeatabilityof the process is also enhanced. There is also less waste. This results in higher speed of production at lowercost. The use of these new methods of manufacturing certainly bring a lot of benefits, but it also presents manychallenges. One of the biggest challenges is to ensure the quality of the product, or the detection of defects inthese structures. Use of OOA tends to produce more voids, and the use of ACM tends to produce more defects,particularly at the ends of the courses, or between tows. Ultrasonic inspection has been used to detect manydefects in composite structures for many years. The challenge here is how to perform the inspection in shortertime, in order to be commensurate to the increased rate of production. TECSCAN has developed an automatedsystem for the ultrasonic inspection of composite structures, where two methods for the determination ofporosity have been developed: ""Attenuation slope"" algorithm based on spectral analysis, and Porositycalculation using the ""simplified atenuation"" technique using front and back wall echos. TECSAN needsreference standards of laminates containing a known amount of porosity to check the accuracy of theirmethods. The objective of the project is to provide the reference laminate standards with known amount ofporosity and to validate the new ultrasonic system by TECSAN for the detection of porosity in laminates.
Programme
Engage Grants Program
Bénéficiaire
Emplacement
Quebec, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
500401-2016
Name nom
Hoa, SuongVan
Department département
Mechanical and Industrial Engineering
Organization id
70
Institution établissement
Concordia University
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2016
Competition year année de concours
2016
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1552
Committee name en
Quebec Internal Decision Committee
Committee name fr
Comité de décision interne pour le Québec
Area of application code
703
Area of application group en
Transportation systems and services
Area of application group fr
Services et systèmes de transport
Area of application en
Aerospace
Area of application fr
Aérospatial
Research subject code
2007
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Composites
Research subject fr
Matériaux composites
Partie
1
Nb partie
1
Application title
Evaluation of Porosity in Composite Materials
Keyword
NSERC
Application summary
Composite materials have been used more and more to make many engineering structures such as aircrafts,wind turbines, automobiles, sports equipment etc. With their increasing use, new methods for manufacturinghave been developed, in an effort to increase the speed of production and to reduce cost. Two methods that aregaining popularity are the use of Out Of Autoclave (OOA) prepregs and the use of Automated CompositeManufacturing (ACM). By using OOA, the use of the autoclave for manufacturing is no longer necessary.Instead of an autoclave, only an oven is required. As such, larger ovens with odd shapes can be used, and largerstructures can be made at lower cost. On the other hand, with the advent of new machine such as automatedfiber placement (AFP), the speed of deposition of layers of composites can be greatly increased. Repeatabilityof the process is also enhanced. There is also less waste. This results in higher speed of production at lowercost. The use of these new methods of manufacturing certainly bring a lot of benefits, but it also presents manychallenges. One of the biggest challenges is to ensure the quality of the product, or the detection of defects inthese structures. Use of OOA tends to produce more voids, and the use of ACM tends to produce more defects,particularly at the ends of the courses, or between tows. Ultrasonic inspection has been used to detect manydefects in composite structures for many years. The challenge here is how to perform the inspection in shortertime, in order to be commensurate to the increased rate of production. TECSCAN has developed an automatedsystem for the ultrasonic inspection of composite structures, where two methods for the determination ofporosity have been developed: ""Attenuation slope"" algorithm based on spectral analysis, and Porositycalculation using the ""simplified atenuation"" technique using front and back wall echos. TECSAN needsreference standards of laminates containing a known amount of porosity to check the accuracy of theirmethods. The objective of the project is to provide the reference laminate standards with known amount ofporosity and to validate the new ultrasonic system by TECSAN for the detection of porosity in laminates.