Grant: Engage Grants Program
University of Alberta
$25,000.00
Characterization of the conductivity and roughness properties of conductive ink/solder paste for the Voltera V-One Rapid PCB prototyping system
EF 2016-17
Résumé
Voltera Inc. sells an innovative printed-circuit-board desktop prototyping system machine called the V-Onethat prints conductive inks onto dielectric substrates to make circuits, as opposed to the traditional methodwhere photolithography is used to remove metal from a uniformly metallized dielectric substrate. The V-Onealso delivers solder paste for the placement of surface-mount components and does reflowing using theV-One's base, which serves a second purpose as a controllable hot plate. This technology works very well forlow-frequency electrical signals, but the properties of the conductive inks and solder paste are not wellunderstood or characterized for frequencies in the RF (hundreds of MHz), microwave (GHz), andmillimeter-wave (tens of GHz) range. In particular, the conduction (ohmic) losses increase dramatically withfrequency, and surface roughness for fine metallic features contributes further to scattering losses. Knowledgeof these losses will be necessary for Voltera Inc. to establish the value of marketing their machines forapplications at these frequencies. These frequencies are home to several important communicationstechnologies, e.g. wi-fi, GPS, radar, etc., and therefore allow the potential for Voltera to significantly expandits target markets. This work seeks to fully characterize the conductivity and roughness properties of Voltera'sconductive inks at frequencies ranging from RF to millimetre wave, using state-of-the-art microwave test andmeasurement equipment at the University of Alberta Department of Electrical and Computer Engineering.Specifically, the loss performance of the conductive ink will be established by using the Voltera V-One tofabricate a number of microwave resonators, for which losses may be inferred by examining quality factors andfrequency responses. Additionally, this project will fabricate several microwave circuits and antennas toestablish whether high-frequency devices fabricated with the Voltera V-One possess comparable lossperformance to those fabricated using more conventional methods. Finally, the project will examine andrecommend potential strategies to mitigate the effect of these losses.
Programme
Engage Grants Program
Bénéficiaire
Emplacement
Alberta, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
501337-2016
Name nom
Iyer, Ashwin
Department département
Engineering, Faculty of
Organization id
9
Institution établissement
University of Alberta
Province en
Alberta
Province fr
Alberta
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2016
Competition year année de concours
2016
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1555
Committee name en
Prairie Internal Decision Committee
Committee name fr
Comité de décision interne pour les Prairies
Area of application code
805
Area of application group en
Information and communication services
Area of application group fr
Services d'information et de télécommunications
Area of application en
Communications technologies (satellites, radar, etc.)
Area of application fr
Technologie des télécommunications (satellites, radar,etc.)
Research subject code
2001
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials structure, properties and testing
Research subject fr
Structure, propriétés et essais des matériaux
Partie
1
Nb partie
1
Application title
Characterization of the conductivity and roughness properties of conductive ink/solder paste for the Voltera V-One Rapid PCB prototyping system
Keyword
NSERC
Application summary
Voltera Inc. sells an innovative printed-circuit-board desktop prototyping system machine called the V-Onethat prints conductive inks onto dielectric substrates to make circuits, as opposed to the traditional methodwhere photolithography is used to remove metal from a uniformly metallized dielectric substrate. The V-Onealso delivers solder paste for the placement of surface-mount components and does reflowing using theV-One's base, which serves a second purpose as a controllable hot plate. This technology works very well forlow-frequency electrical signals, but the properties of the conductive inks and solder paste are not wellunderstood or characterized for frequencies in the RF (hundreds of MHz), microwave (GHz), andmillimeter-wave (tens of GHz) range. In particular, the conduction (ohmic) losses increase dramatically withfrequency, and surface roughness for fine metallic features contributes further to scattering losses. Knowledgeof these losses will be necessary for Voltera Inc. to establish the value of marketing their machines forapplications at these frequencies. These frequencies are home to several important communicationstechnologies, e.g. wi-fi, GPS, radar, etc., and therefore allow the potential for Voltera to significantly expandits target markets. This work seeks to fully characterize the conductivity and roughness properties of Voltera'sconductive inks at frequencies ranging from RF to millimetre wave, using state-of-the-art microwave test andmeasurement equipment at the University of Alberta Department of Electrical and Computer Engineering.Specifically, the loss performance of the conductive ink will be established by using the Voltera V-One tofabricate a number of microwave resonators, for which losses may be inferred by examining quality factors andfrequency responses. Additionally, this project will fabricate several microwave circuits and antennas toestablish whether high-frequency devices fabricated with the Voltera V-One possess comparable lossperformance to those fabricated using more conventional methods. Finally, the project will examine andrecommend potential strategies to mitigate the effect of these losses.