Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Alliance Grants

University of Toronto

$25,000.00

Development of a bench-scale liquid metal wiping pilot system for understanding and optimizing the jet wiping process during hot dip galvanizing

EF 2024-25

Résumé
In the case of hot-dip galvanizing, a continuously-moving steel strip is coated with a thin layer of zinc in order to resist to oxidization. The protective metal is applied in its liquid state, by dipping the substrate into a bath of coating. However, at common strip speeds, the liquid layer dragged by the moving web is far too thick and uneven for the applications considered. The final coating thickness is therefore controlled by an air knife, which impinges a two-dimensional high-speed gas jet on the liquid layer. The forces imposed in the liquid by the air knife jet results in the formation of a runback flow down to the bath, leaving a more uniform and constant coating thickness dowsntream on the substrate. Nevertheless, operational constraints and process parameter variation can still result in significant coating non-uniformity and excess zinc consumption. This research program will focus on developing a bench scale galvanizing pilot where a low melting point liquid metal will be used as an analogue to zinc and a rotating belt arrangement will be combined with an air knife to visualize the jet wiping process in more detail. State of the art imaging techniques developed at the applicant's laboratory will be used to visualize the wiping process, coating waviness and solution strategies will be proposed for optimizing the wiping system in terms of process parameters and air knife design. With many existing problems at the hot dip galvanizing lines it is difficult to meet the market demands. The results of this project are expected to help galvanized strip producers like AM Dofasco to determine, and control the optimum coating properties that will allow them obtaining the highest productivity and simultaneously achieve high quality strips with desired product quality. Proper understanding of the jet wiping process and its influence on galvanized product quality has profound impacts on the commercial aspects of hot dip galvanizing. Based on the current interests in this process optimization, and enhanced productivity (expressed by AM Dofasco hot dip galvanizing lines), an economic impact of $6 million /year is expected from the results of this research, which translates to $30 million within five years after completion of this project
Programme
Alliance Grants
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
565310-2021
Name nom
Barati, Mansoor M
Department département
Materials Science and Engineering
Organization id
31
Institution établissement
University of Toronto
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2024
Competition year année de concours
2021
Award amount
25000
Program id
ALLRP
Program name en
Alliance Grants
Program name fr
Subventions Alliance
Group en
RESEARCH PARTNERSHIPS
Group fr
PARTENARIATS DE RECHERCHE
Committee code
96
Committee name en
RPP Internal Decision Cttee
Committee name fr
Cté de décision interne - PPR
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2000
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials science and technology
Research subject fr
Science et technologie des matériaux
Field of research list names en
Not available
Field of research list names fr
Non disponible
Socioeconomic objective list names en
Not available
Socioeconomic objective list names fr
Non disponible
Application title
Development of a bench-scale liquid metal wiping pilot system for understanding and optimizing the jet wiping process during hot dip galvanizing
Keywords
air knife; galvanizing; imaging; jet wiping; physical modeling; visualization
Application summary
In the case of hot-dip galvanizing, a continuously-moving steel strip is coated with a thin layer of zinc in order to resist to oxidization. The protective metal is applied in its liquid state, by dipping the substrate into a bath of coating. However, at common strip speeds, the liquid layer dragged by the moving web is far too thick and uneven for the applications considered. The final coating thickness is therefore controlled by an air knife, which impinges a two-dimensional high-speed gas jet on the liquid layer. The forces imposed in the liquid by the air knife jet results in the formation of a runback flow down to the bath, leaving a more uniform and constant coating thickness dowsntream on the substrate. Nevertheless, operational constraints and process parameter variation can still result in significant coating non-uniformity and excess zinc consumption. This research program will focus on developing a bench scale galvanizing pilot where a low melting point liquid metal will be used as an analogue to zinc and a rotating belt arrangement will be combined with an air knife to visualize the jet wiping process in more detail. State of the art imaging techniques developed at the applicant's laboratory will be used to visualize the wiping process, coating waviness and solution strategies will be proposed for optimizing the wiping system in terms of process parameters and air knife design. With many existing problems at the hot dip galvanizing lines it is difficult to meet the market demands. The results of this project are expected to help galvanized strip producers like AM Dofasco to determine, and control the optimum coating properties that will allow them obtaining the highest productivity and simultaneously achieve high quality strips with desired product quality. Proper understanding of the jet wiping process and its influence on galvanized product quality has profound impacts on the commercial aspects of hot dip galvanizing. Based on the current interests in this process optimization, and enhanced productivity (expressed by AM Dofasco hot dip galvanizing lines), an economic impact of $6 million /year is expected from the results of this research, which translates to $30 million within five years after completion of this project