Grant: Research Tools and Instruments
University of Toronto
$150,000.00
A custom designed apparatus to enable HQP to fabricate thin film organic electronic devices with a low sample mass requirement.
EF 2015-16
Résumé
At the University of Toronto we have significant efforts on the molecular design of novel organic semi-conducting materials with a primary focus on their application in organic solar cells (OSCs). OSCs are electronic devices that directly convert sunlight into electric charge. whereby organic materials are the ‘active materials’, defined as the materials responsible for the direct conversion of light to electric charge. OSCs recently achieved a benchmark efficiency of 8.4%, half of that of a silicon based solar cell but at a projected 1/10 of the cost. Organic active materials are versatile and can be varied and their functions engineered through the versatility of organic chemical reactions. Therefore OSCs have the potential to be the next generation of solar cell technologies.
The research group of Prof Bender (Chemical Engineering and Applied Chemistry) and his close collaborator Prof Lu (Materials Science and Engineering) have an ongoing research program in the area of organic materials for application in OSCs with a primary focus on boron subphthalocyanines (BsubPc). BsubPcs were a critical component of the reported 8.4% OSC and Profs Bender and Lu are moving to exceed this benchmark efficiency. We have in the past developed simple high yielding chemical processes to produce a variety of BsubPc forms. However, some BsubPcs and analogous materials of interest have proven to be very difficult to synthesize at a scale required for prototype OSC fabrication (>500 mg). For example, an oxygen bridged BsubPc dimer required our group 1 to 3 years of chemical process development to move from a ~50-100 mg scale to the >500 mg. Profs Bender and Seferos are also close collaborators working on novel materials to enable the singlet fission/triplet harvesting process; a photonic process that is seen as a method to further increase OSC efficiency.
We are requesting funding for a custom designed OSC fabrication apparatus that does not require 500 mg of material, rather can fabricate OSCs with only ~50-100 mg of material. We have coined this apparatus ‘mini-VD’. We have engaged with three vendors and two have put forward suggested designs that meet the criteria for the ‘mini-VD’.
Having ‘mini-VD’ in our laboratories would have two key benefits. The first would be to allow us to publish the application and evaluation of hard to synthesize materials in a more timely manner; approximately 1 year instead of 3 years. Secondly, should a hard to synthesize BsubPc or related material prove early on to have a performance greater than benchmark materials in an OSC, the early acquisition of OSC performance data would empower our graduate students to undertake the process chemistry activity to move to a >500 mg scale with more vigor and purpose as they will know the further study of these materials will yield high quality results. This would enhance our HQP’s experience and our ability to guide them through their respective educational program.
Programme
Research Tools and Instruments
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
RTI-2016-00477
Name nom
Bender, Timothy
Department département
Chemical Engineering and Applied Chemistry - Chemical Engineering and Applied Ch
Organization id
31
Institution établissement
University of Toronto
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2015
Competition year année de concours
2016
Award amount
150000
Program id
RTI
Program name en
Research Tools and Instruments
Program name fr
Outils et instruments de recherche
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1609
Committee name en
Engineering (RTI)
Committee name fr
Génie (OIR)
Area of application code
303
Area of application group en
Energy resources
Area of application group fr
Ressources d'énergie
Area of application en
Alternative energy resources
Area of application fr
Autres ressources d'énergie
Research subject code
2018
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Synthesis
Research subject fr
Synthèse
Partie
1
Nb partie
1
Application title
A custom designed apparatus to enable HQP to fabricate thin film organic electronic devices with a low sample mass requirement.
Keyword
NSERC
Application summary
At the University of Toronto we have significant efforts on the molecular design of novel organic semi-conducting materials with a primary focus on their application in organic solar cells (OSCs). OSCs are electronic devices that directly convert sunlight into electric charge. whereby organic materials are the ‘active materials’, defined as the materials responsible for the direct conversion of light to electric charge. OSCs recently achieved a benchmark efficiency of 8.4%, half of that of a silicon based solar cell but at a projected 1/10 of the cost. Organic active materials are versatile and can be varied and their functions engineered through the versatility of organic chemical reactions. Therefore OSCs have the potential to be the next generation of solar cell technologies.<br />
<br />
The research group of Prof Bender (Chemical Engineering and Applied Chemistry) and his close collaborator Prof Lu (Materials Science and Engineering) have an ongoing research program in the area of organic materials for application in OSCs with a primary focus on boron subphthalocyanines (BsubPc). BsubPcs were a critical component of the reported 8.4% OSC and Profs Bender and Lu are moving to exceed this benchmark efficiency. We have in the past developed simple high yielding chemical processes to produce a variety of BsubPc forms. However, some BsubPcs and analogous materials of interest have proven to be very difficult to synthesize at a scale required for prototype OSC fabrication (>500 mg). For example, an oxygen bridged BsubPc dimer required our group 1 to 3 years of chemical process development to move from a ~50-100 mg scale to the >500 mg. Profs Bender and Seferos are also close collaborators working on novel materials to enable the singlet fission/triplet harvesting process; a photonic process that is seen as a method to further increase OSC efficiency.<br />
<br />
We are requesting funding for a custom designed OSC fabrication apparatus that does not require 500 mg of material, rather can fabricate OSCs with only ~50-100 mg of material. We have coined this apparatus ‘mini-VD’. We have engaged with three vendors and two have put forward suggested designs that meet the criteria for the ‘mini-VD’.<br />
<br />
Having ‘mini-VD’ in our laboratories would have two key benefits. The first would be to allow us to publish the application and evaluation of hard to synthesize materials in a more timely manner; approximately 1 year instead of 3 years. Secondly, should a hard to synthesize BsubPc or related material prove early on to have a performance greater than benchmark materials in an OSC, the early acquisition of OSC performance data would empower our graduate students to undertake the process chemistry activity to move to a >500 mg scale with more vigor and purpose as they will know the further study of these materials will yield high quality results. This would enhance our HQP’s experience and our ability to guide them through their respective educational program.<br />