Grant: Collaborative Research and Development Grants
University of Alberta
$52,228.00
Understanding and Mitigating Leakage Pathways in Oil and Gas Well Cements_x000d_
EF 2020-21
Résumé
Methane is a potent greenhouse gas (GHG) that is 25 times more powerful than carbon dioxide. In Canada, methane emissions make up about 15 percent of the total GHG emissions. Upstream oil and gas industry facilities are Canada's largest industrial emitters of methane, releasing 44% of the country's total methane emissions. Within the upstream oil and gas industry a significant fraction of the methane emission results from fugitive leaks arising from surface casing vent flow (SCVF) and gas migration (GM). Bulk cement as well as cement/casing and casing /rock interfaces are likely to be the weak spots in oil and gas wells with regard to leakage and long term well integrity. Debonding of cement from casing and/or formation, and subsequent loss of zonal isolation, is a significant contributor to fugitive methane emissions from SCVF and GM in oil and gas wells. De-bonding can be caused by thermal stresses due to thermal cycling induced by injection of a relatively cold or hot fluid down the well. It may also be caused by mechanical loads due to changing in-situ stresses (caused by multi-stage hydraulic fracturing and re-fracturing, reservoir depletion or CO2 injection); by chemically active fluids; or by a combination of the above factors. Understanding the mechanism of leakage pathway formation is crucial for assessment and improvement of cement performance in oil and gas wells, whether it is producing or plugged and abandoned. Comprehensive experimental and numerical studies of the mechanisms of cement failure and de-bonding and how this impacts fluid movement through the cement microstructure are, therefore, proposed. Direct imaging and subsequent modeling of the cement pore structure, cement/casing, and cement/formation interfaces pre and post-failure, as proposed in this project, will allow for the design and development of robust cementing systems that can be used for more cost effective mitigation of fugitive methane emissions.
Programme
Collaborative Research and Development Grants
Bénéficiaire
Emplacement
Alberta, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
531509-2018
Name nom
Kuru, Ergun
Department département
Civil and Environmental Engineering
Organization id
9
Institution établissement
University of Alberta
Province en
Alberta
Province fr
Alberta
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2020
Competition year année de concours
2018
Award amount
52228
Program id
CRDPJ
Program name en
Collaborative Research and Development Grants
Program name fr
Subventions de recherche et développement coopérative
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
96
Committee name en
RPP Internal Decision Cttee
Committee name fr
Cté de décision interne - PPR
Area of application code
301
Area of application group en
Energy resources
Area of application group fr
Ressources d'énergie
Area of application en
Oil, gas and coal
Area of application fr
Pétrole, gaz et charbon
Research subject code
2302
Research subject group en
Fuel and energy technology
Research subject group fr
Combustibles et technologie de l'énergie
Research subject en
Petroleum engineering, oil and gas recovery
Research subject fr
Génie du pétrole, récupération du pétrole et du gaz
Installment
inst:3 - 3
Partie
1
Nb partie
3
Application title
Understanding and Mitigating Leakage Pathways in Oil and Gas Well Cements_x000d_
Keyword
NSERC
Application summary
Methane is a potent greenhouse gas (GHG) that is 25 times more powerful than carbon dioxide. In Canada, methane emissions make up about 15 percent of the total GHG emissions. Upstream oil and gas industry facilities are Canada's largest industrial emitters of methane, releasing 44% of the country's total methane emissions. Within the upstream oil and gas industry a significant fraction of the methane emission results from fugitive leaks arising from surface casing vent flow (SCVF) and gas migration (GM). Bulk cement as well as cement/casing and casing /rock interfaces are likely to be the weak spots in oil and gas wells with regard to leakage and long term well integrity. Debonding of cement from casing and/or formation, and subsequent loss of zonal isolation, is a significant contributor to fugitive methane emissions from SCVF and GM in oil and gas wells. De-bonding can be caused by thermal stresses due to thermal cycling induced by injection of a relatively cold or hot fluid down the well. It may also be caused by mechanical loads due to changing in-situ stresses (caused by multi-stage hydraulic fracturing and re-fracturing, reservoir depletion or CO2 injection); by chemically active fluids; or by a combination of the above factors. Understanding the mechanism of leakage pathway formation is crucial for assessment and improvement of cement performance in oil and gas wells, whether it is producing or plugged and abandoned. Comprehensive experimental and numerical studies of the mechanisms of cement failure and de-bonding and how this impacts fluid movement through the cement microstructure are, therefore, proposed. Direct imaging and subsequent modeling of the cement pore structure, cement/casing, and cement/formation interfaces pre and post-failure, as proposed in this project, will allow for the design and development of robust cementing systems that can be used for more cost effective mitigation of fugitive methane emissions.