Grant: Discovery Grants Program - Individual
University of Saskatchewan
$43,000.00
Evaluation of Liquefaction Potential in Fine Sand Tailings using a Self-Bore Pressuremeter
EF 2024-25
Résumé
This study builds upon the largest liquefaction study to date in Canada, the CANLEX project (Robertson et al., 2000). CANLEX was designed to prevent catastrophes like Fundao dam failure in Brazil, which killed 19 people and polluted roughly 670 km of waterways. CANLEX was conducted at a number of mine facilities throughout Western Canada. The purpose was to determine methods for assessing long-term risk associated with liquefaction of tailings and tailings management facilities (TMF). The CANLEX project set the standard for liquefaction potential screening in North America and the world. The primary focus of CANLEX was the cone penetration test with pore pressure measurements (CPTu) and its use in liquefaction screening.
The CPTu is effective at screening large areas of tailings and provides vast quantities of data with high resolution. The classification of soils from the CPTu is widely accepted; however, other parameters such as strength and stiffness are not directly measured and must be calibrated to other data. Owing to the empiricism, CPTu methods of analysis are poorly understood by most practising engineers and are typically blindly applied. CANLEX did not actively explore the possibility of determining the liquefaction potential using the self-bore pressuremeter (SBPM). At the time, the SBPM field data was used solely to calibrate the associated CPTu data by measuring the strength and stiffness values of various deposits in-situ. Roy (1997) and Hughes et al. (1999) describe a theory to determine the liquefaction potential of fine sand tailings by using the SBPM. Additionally, Elwood et al. (2015) proposed a closed form solution to assess the radial pressure required to force a saturated soil to saturation during cavity expansion. The method proposed by Elwood et al. (2015) has not been physically tested, but the potential of this method is two-fold. First, the method would elucidate the potential for material collapse during wetting; and second, if an initial degree of saturation of the soil is known, it would provide a means for calculating the initial void ratio without complex and often cost prohibitive sampling techniques.
This research program will examine the use of the SBPM to evaluate the validity of the hypotheses made by Roy (1997) and Hughes et al. (1999) and to assess the potential collapse pressures of unsaturated tailings. The short-term objective is to deliver a program that focuses on scaled experimentation designed as proof of concepts and to create testing methodologies that are readily transferred to commercial implementation. SBPM findings will then be related directly to legacy CPTu analyses to allow a broader application to existing data and facilities. This research is important to Canada due to its vast number of TMFs across the country. By empowering designers with the tools necessary for aiding in design, operation and closure of TMFs, the risks to humans, wildlife and the environment are greatly reduced.
Programme
Discovery Grants Program - Individual
Bénéficiaire
Emplacement
Saskatchewan, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
RGPIN-2024-03854
Name nom
Elwood, David
Department département
Civil and Geological Engineering
Organization id
16
Institution établissement
University of Saskatchewan
Province en
Saskatchewan
Province fr
Saskatchewan
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2024
Competition year année de concours
2024
Award amount
43000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
DISCOVERY RESEARCH
Group fr
RECHERCHE AXÉE SUR LA DÉCOUVERTE
Committee code
1509
Committee name en
Civil, Industrial and Systems Engineering
Committee name fr
Génie civil, industriel et des systèmes
Area of application code
1206
Area of application group en
Advancement of knowledge
Area of application group fr
Avancement des connaissances
Area of application en
Engineering
Area of application fr
Génie
Research subject code
1002
Research subject group en
Civil engineering
Research subject group fr
Génie civil
Research subject en
Geotechnical engineering (including engineering geology)
Research subject fr
Géotechnique (y compris génie géologique)
Field of research list names en
Not available
Field of research list names fr
Non disponible
Socioeconomic objective list names en
Not available
Socioeconomic objective list names fr
Non disponible
Application title
Evaluation of Liquefaction Potential in Fine Sand Tailings using a Self-Bore Pressuremeter
Keywords
liquefaction; tailings management; in-situ testing; self-bore pressuremeter; cone penetration testing; non-linear elastic modulus; small strain modulus determination; geotechnical engineering; unsaturated soil mechanics; soil mechanics
Application summary
This study builds upon the largest liquefaction study to date in Canada, the CANLEX project (Robertson et al., 2000). CANLEX was designed to prevent catastrophes like Fundao dam failure in Brazil, which killed 19 people and polluted roughly 670 km of waterways. CANLEX was conducted at a number of mine facilities throughout Western Canada. The purpose was to determine methods for assessing long-term risk associated with liquefaction of tailings and tailings management facilities (TMF). The CANLEX project set the standard for liquefaction potential screening in North America and the world. The primary focus of CANLEX was the cone penetration test with pore pressure measurements (CPTu) and its use in liquefaction screening.
The CPTu is effective at screening large areas of tailings and provides vast quantities of data with high resolution. The classification of soils from the CPTu is widely accepted; however, other parameters such as strength and stiffness are not directly measured and must be calibrated to other data. Owing to the empiricism, CPTu methods of analysis are poorly understood by most practising engineers and are typically blindly applied. CANLEX did not actively explore the possibility of determining the liquefaction potential using the self-bore pressuremeter (SBPM). At the time, the SBPM field data was used solely to calibrate the associated CPTu data by measuring the strength and stiffness values of various deposits in-situ. Roy (1997) and Hughes et al. (1999) describe a theory to determine the liquefaction potential of fine sand tailings by using the SBPM. Additionally, Elwood et al. (2015) proposed a closed form solution to assess the radial pressure required to force a saturated soil to saturation during cavity expansion. The method proposed by Elwood et al. (2015) has not been physically tested, but the potential of this method is two-fold. First, the method would elucidate the potential for material collapse during wetting; and second, if an initial degree of saturation of the soil is known, it would provide a means for calculating the initial void ratio without complex and often cost prohibitive sampling techniques.
This research program will examine the use of the SBPM to evaluate the validity of the hypotheses made by Roy (1997) and Hughes et al. (1999) and to assess the potential collapse pressures of unsaturated tailings. The short-term objective is to deliver a program that focuses on scaled experimentation designed as proof of concepts and to create testing methodologies that are readily transferred to commercial implementation. SBPM findings will then be related directly to legacy CPTu analyses to allow a broader application to existing data and facilities. This research is important to Canada due to its vast number of TMFs across the country. By empowering designers with the tools necessary for aiding in design, operation and closure of TMFs, the risks to humans, wildlife and the environment are greatly reduced.