Grant: Engage Grants Program
University of Windsor
$25,000.00
In-house Recycling of Aluminum A380 Machining Chips
EF 2013-14
Résumé
In the past two decades, aluminum alloys as a light weight material have been increasingly used in the automotive industry. Worldwide average aluminum content was 7.8% of the average worldwide light vehicle curb weight of 3,183 pounds in 2009. North America (NA) has the highest aluminum penetration at 8.6% of N.A. curb weight in the world. The usage of aluminum in NA automobiles has gone from 45kg (101 lbs) in the 1970s to 150 kg (326 lbs) in 2009, and will top 250 kg (550 lbs) per vehicle by 2025. Among the 150 kg aluminum usage in each vehicle, almost 35% of automotive aluminum components were manufactured by conventional high pressure die-casting (C-HPDC) processes. When C-HPDC components are manufactured, considerable amount of aluminum waste in the form of scrap, dross, and machining chips is produced as byproducts. The casting scrap is easily returned to melting, whereby most of the metal is recovered and re-utilized in production processes. The recovery of aluminum from dross can be achieved at a recovery rate of over 80% by mixing the dross with certain types of fluxes. During the recycling of dross and chips, however, a lot of metal is lost as a result of oxidation, and the costs of labor and energy as well as the expenditure on environmental protection increase the general cost of the process. The objective of this project is to carry out a feasibility study on in-house recycling of aluminum A380 machining chips with good metal quality and energy efficiency. The scope of the project includes comprehensive literature review, selection of chemical solution, cleaning, compacting and refining machining chips, casting recovered alloys, and microstructural analyses and mechanical property evaluation of the recovered alloy A380. The outcome of the project will help maintain Canada's leadership in the world in producing light weight Al automotive components since Canada is presently hosting several large die casting producers of aluminum with Magna in Ontario and Lyster in Quebec. So, the development of the recycling technology for energy-efficiently recovering light alloys will lead to an expansion of world-wide use of Canadian value-added Al products.
Programme
Engage Grants Program
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
455278-2013
Name nom
Hu, HongfaHenry
Department département
Mechanical, Automotive and Materials Engineering
Organization id
37
Institution établissement
University of Windsor
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2013
Competition year année de concours
2013
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2003
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Metallurgy
Research subject fr
Métallurgie
Partie
1
Nb partie
1
Application title
In-house Recycling of Aluminum A380 Machining Chips
Keyword
NSERC
Application summary
In the past two decades, aluminum alloys as a light weight material have been increasingly used in the automotive industry. Worldwide average aluminum content was 7.8% of the average worldwide light vehicle curb weight of 3,183 pounds in 2009. North America (NA) has the highest aluminum penetration at 8.6% of N.A. curb weight in the world. The usage of aluminum in NA automobiles has gone from 45kg (101 lbs) in the 1970s to 150 kg (326 lbs) in 2009, and will top 250 kg (550 lbs) per vehicle by 2025. Among the 150 kg aluminum usage in each vehicle, almost 35% of automotive aluminum components were manufactured by conventional high pressure die-casting (C-HPDC) processes. When C-HPDC components are manufactured, considerable amount of aluminum waste in the form of scrap, dross, and machining chips is produced as byproducts. The casting scrap is easily returned to melting, whereby most of the metal is recovered and re-utilized in production processes. The recovery of aluminum from dross can be achieved at a recovery rate of over 80% by mixing the dross with certain types of fluxes. During the recycling of dross and chips, however, a lot of metal is lost as a result of oxidation, and the costs of labor and energy as well as the expenditure on environmental protection increase the general cost of the process. The objective of this project is to carry out a feasibility study on in-house recycling of aluminum A380 machining chips with good metal quality and energy efficiency. The scope of the project includes comprehensive literature review, selection of chemical solution, cleaning, compacting and refining machining chips, casting recovered alloys, and microstructural analyses and mechanical property evaluation of the recovered alloy A380. The outcome of the project will help maintain Canada's leadership in the world in producing light weight Al automotive components since Canada is presently hosting several large die casting producers of aluminum with Magna in Ontario and Lyster in Quebec. So, the development of the recycling technology for energy-efficiently recovering light alloys will lead to an expansion of world-wide use of Canadian value-added Al products.