Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Discovery Grants Program - Individual

École Polytechnique de Montréal

$26,000.00

Aerodynamic Improvement of Centrifugal Compressors

EF 2018-19

Résumé
A step improvement in aero-engine technology will be crucial for the air transport industry to confront the inevitable increase in fuel prices, competition and environmental pressures. The centrifugal compressor, which has far superior pressure ratio per stage than axial compressors currently used in most aircraft engines, can play a major role in this improvement. Indeed, the replacement of many axial compressor stages by a single centrifugal compressor stage will result in simpler, shorter and lighter aero-engines. However, the aerodynamic performance and technology of centrifugal compressors must be brought close to that of axial compressors. The proposed research will build on experience and developments in axial compressor technology to significantly improve the aerodynamics of centrifugal compressors for wider use in aero-propulsion. It will seek to improve the adiabatic efficiency and stall margin of centrifugal compressors as well as reduce the degradation of these parameters with engine age. It is proposed to do so through investigation and understanding of the flow physics and developing effective design and flow control strategies by using a pioneering cost-effective approach that takes advantage of the rapid evolution in additive manufacturing (3D printing) technology. * First, additive manufacturing technology allows for the exploration highly complex designs that were not practical or possible with standard manufacturing technology. In addition, polymer 3D printing technology allows for fast fabrication of relatively inexpensive test rigs. The proposed research will rely on low-cost fully instrumented rotating centrifugal compressor rigs custom designed and built with 3D printing by large teams of senior undergraduate students in a two-semester final-year design project course that has successfully produced compressor rigs for three years. The test data obtained from the first new rig will serve to validate a computation fluid dynamics (CFD) simulation tool to capture the complex flow field in centrifugal compressors. This simulation tool will be used, along with analytical modelling, by graduate students to elucidate/understand the flow mechanisms associated with the three aspects studied and predict the effect of aerodynamic improvement strategies. The second new rig will then serve to experimentally validate these strategies. In doing so, this research will provide cost-effective training of a large number of HQP in all three aspects of engineering (analytical/numerical/experimental) and provide industry with sought-after experts in centrifugal compressor technology not only for aeronautics but also for the very wide variety of industries that use this technology.*
Programme
Discovery Grants Program - Individual
Emplacement
Quebec, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
RGPIN-2016-06645
Name nom
Vo, HuuDuc
Department département
Génie mécanique
Organization id
64
Institution établissement
École Polytechnique de Montréal
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2018
Competition year année de concours
2016
Award amount
26000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
703
Area of application group en
Transportation systems and services
Area of application group fr
Services et systèmes de transport
Area of application en
Aerospace
Area of application fr
Aérospatial
Research subject code
2108
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Aerospace, aeronautical and automotive engineering
Research subject fr
Génie aérospatial, aéronautique et automobile
Partie
3
Nb partie
5
Application title
Aerodynamic Improvement of Centrifugal Compressors
Keyword
NSERC
Application summary
A step improvement in aero-engine technology will be crucial for the air transport industry to confront the inevitable increase in fuel prices, competition and environmental pressures. The centrifugal compressor, which has far superior pressure ratio per stage than axial compressors currently used in most aircraft engines, can play a major role in this improvement. Indeed, the replacement of many axial compressor stages by a single centrifugal compressor stage will result in simpler, shorter and lighter aero-engines. However, the aerodynamic performance and technology of centrifugal compressors must be brought close to that of axial compressors. The proposed research will build on experience and developments in axial compressor technology to significantly improve the aerodynamics of centrifugal compressors for wider use in aero-propulsion. It will seek to improve the adiabatic efficiency and stall margin of centrifugal compressors as well as reduce the degradation of these parameters with engine age. It is proposed to do so through investigation and understanding of the flow physics and developing effective design and flow control strategies by using a pioneering cost-effective approach that takes advantage of the rapid evolution in additive manufacturing (3D printing) technology. * First, additive manufacturing technology allows for the exploration highly complex designs that were not practical or possible with standard manufacturing technology. In addition, polymer 3D printing technology allows for fast fabrication of relatively inexpensive test rigs. The proposed research will rely on low-cost fully instrumented rotating centrifugal compressor rigs custom designed and built with 3D printing by large teams of senior undergraduate students in a two-semester final-year design project course that has successfully produced compressor rigs for three years. The test data obtained from the first new rig will serve to validate a computation fluid dynamics (CFD) simulation tool to capture the complex flow field in centrifugal compressors. This simulation tool will be used, along with analytical modelling, by graduate students to elucidate/understand the flow mechanisms associated with the three aspects studied and predict the effect of aerodynamic improvement strategies. The second new rig will then serve to experimentally validate these strategies. In doing so, this research will provide cost-effective training of a large number of HQP in all three aspects of engineering (analytical/numerical/experimental) and provide industry with sought-after experts in centrifugal compressor technology not only for aeronautics but also for the very wide variety of industries that use this technology.*