Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Engage Grants Program

Queen's University

$25,000.00

Developing new scrim reinforced low density polyethylene geomembranes for heap leach pad mining application

EF 2014-15

Résumé
Heap leach mining represents a popular metal recovery process in which the mined ore is crushed and placed in large piles typically up to about 150m on top of a geomembrane liner. A chemical solution specific to the metal to be recovered is then applied at a controlled rate to the top of the ore pile. This solution leaches through the pile and is collected from a drainage layer at the base of the pile which rests on a geomembrane that is intended to minimize the escape of solution thereby maximizing resource recovery and minimizing contamination of underlying groundwater. The geomembranes presently in use in heap leach mining applications are solid, typically 1.5 - 2mm linear low density polyethylene (LLDPE) or high density polyethylene (HDPE) in about 22% and 75% (respectively) of heap leach pad applications. IPG have developed a very different geomembrane using a woven scrim in conjunction with a low density polyethylene which is thought to have potential to be superior to the traditional materials in heap leach applications. However research is required to understand howthis geomembrane performs when subjected to the physical and chemical exposure conditions expected in field applications and to optimize the product design as needed to give best performance. Queen's University has the unique expertise and equipment required to address these questions and allow IPG to develop this major new market in Canada and internationally. The objective of this research is to demonstrate whether or not the new approach implemented in manufacturing the new geomembrane would create a better alternative than the geomembranes currently being used in heap leach pad applications by understanding the fundamental mechanism by which puncturing occurs (if they do occur) or alternatively what are the mechanisms by which the new liner resists puncture in situations where traditional liners have been observed to puncture in an endeavour to enhance the puncture resistance of IPG geomembranes manufactured using this very different approach to those normally used in heap leach applications. The research will involve training of three HQP.
Programme
Engage Grants Program
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
476949-2014
Name nom
Rowe, RKerry
Department département
Civil Engineering
Organization id
29
Institution établissement
Queen's University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2014
Competition year année de concours
2014
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
409
Area of application group en
Environment
Area of application group fr
Environnement
Area of application en
Environmental impact of economic activities (including agriculture)
Area of application fr
Effet des activités économiques sur l'environnement (y compris agriculture)
Research subject code
1002
Research subject group en
Civil engineering
Research subject group fr
Génie civil
Research subject en
Geotechnical engineering (including engineering geology)
Research subject fr
Géotechnique (y compris génie géologique)
Partie
1
Nb partie
1
Application title
Developing new scrim reinforced low density polyethylene geomembranes for heap leach pad mining application
Keyword
NSERC
Application summary
Heap leach mining represents a popular metal recovery process in which the mined ore is crushed and placed in large piles typically up to about 150m on top of a geomembrane liner. A chemical solution specific to the metal to be recovered is then applied at a controlled rate to the top of the ore pile. This solution leaches through the pile and is collected from a drainage layer at the base of the pile which rests on a geomembrane that is intended to minimize the escape of solution thereby maximizing resource recovery and minimizing contamination of underlying groundwater. The geomembranes presently in use in heap leach mining applications are solid, typically 1.5 - 2mm linear low density polyethylene (LLDPE) or high density polyethylene (HDPE) in about 22% and 75% (respectively) of heap leach pad applications. IPG have developed a very different geomembrane using a woven scrim in conjunction with a low density polyethylene which is thought to have potential to be superior to the traditional materials in heap leach applications. However research is required to understand howthis geomembrane performs when subjected to the physical and chemical exposure conditions expected in field applications and to optimize the product design as needed to give best performance. Queen's University has the unique expertise and equipment required to address these questions and allow IPG to develop this major new market in Canada and internationally. The objective of this research is to demonstrate whether or not the new approach implemented in manufacturing the new geomembrane would create a better alternative than the geomembranes currently being used in heap leach pad applications by understanding the fundamental mechanism by which puncturing occurs (if they do occur) or alternatively what are the mechanisms by which the new liner resists puncture in situations where traditional liners have been observed to puncture in an endeavour to enhance the puncture resistance of IPG geomembranes manufactured using this very different approach to those normally used in heap leach applications. The research will involve training of three HQP.