Grant: Collaborative Research and Development Grants
University of Toronto
$19,500.00
Creep modeling of precision adhesive joints in opto-electronic devices
EF 2014-15
Résumé
Opto-electronic devices consist of optical elements attached to a substrate; the most common method of fixing these components to the substrate is by means of adhesives. Adhesives are susceptible to creep and stress relaxation under the influence of internal and external stresses, which may lead to subtle perturbation of the position of optical components, thereby affecting performance over time. Opto-mechanical design needs to account for this end of life (EOL) behavior of precision adhesive bonds. There is a lack of predictive model for designing against these mechanisms, leading to rule-of-thumb design criteria and material selection processes. Adhesives may be subjected to residual stresses during the curing process, e.g. due to mismatch in coefficient of thermal expansion (CTE) between the optical elements, adhesive, and the substrate. External stresses arise from forces such as gravity and vibration. In optical devices, the external stresses are typically a fraction of the ultimate material strength and normally creep rupture is not a concern. However, the devices are sensitive to very small changes in position, and therefore even low stress can affect device performance. Finite element analysis (FEA) is a powerful tool in opto-mechanical design, and ideal for modeling stress state due to the above loading for complex product geometry. There are several standard creep models incorporated in commercial FEA software such as ANSYS; however, it is not clear they are applicable to the materials of interest, or to low stress creep behavior. The focus of the proposed collaborative research between Professor Spelt and JDSU Ottawa is to measure the creep properties of candidate adhesives and then develop and evaluate adhesive creep models to be used in FEA software for the prediction of creep in opto-electronic adhesive joints.
Programme
Collaborative Research and Development Grants
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
463690-2014
Name nom
Spelt, Jan
Department département
Mechanical and Industrial Engineering
Organization id
31
Institution établissement
University of Toronto
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2014
Competition year année de concours
2014
Award amount
19500
Program id
CRDPJ
Program name en
Collaborative Research and Development Grants
Program name fr
Subventions de recherche et développement coopérative
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
96
Committee name en
RPP Internal Decision Cttee
Committee name fr
Cté de décision interne - PPR
Area of application code
514
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Communications equipment
Area of application fr
Matériel de télécommunications
Research subject code
2103
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Plasticity, creep
Research subject fr
Plasticité, fluage
Partie
1
Nb partie
2
Application title
Creep modeling of precision adhesive joints in opto-electronic devices
Keyword
NSERC
Application summary
Opto-electronic devices consist of optical elements attached to a substrate; the most common method of fixing these components to the substrate is by means of adhesives. Adhesives are susceptible to creep and stress relaxation under the influence of internal and external stresses, which may lead to subtle perturbation of the position of optical components, thereby affecting performance over time. Opto-mechanical design needs to account for this end of life (EOL) behavior of precision adhesive bonds. There is a lack of predictive model for designing against these mechanisms, leading to rule-of-thumb design criteria and material selection processes. Adhesives may be subjected to residual stresses during the curing process, e.g. due to mismatch in coefficient of thermal expansion (CTE) between the optical elements, adhesive, and the substrate. External stresses arise from forces such as gravity and vibration. In optical devices, the external stresses are typically a fraction of the ultimate material strength and normally creep rupture is not a concern. However, the devices are sensitive to very small changes in position, and therefore even low stress can affect device performance. Finite element analysis (FEA) is a powerful tool in opto-mechanical design, and ideal for modeling stress state due to the above loading for complex product geometry. There are several standard creep models incorporated in commercial FEA software such as ANSYS; however, it is not clear they are applicable to the materials of interest, or to low stress creep behavior. The focus of the proposed collaborative research between Professor Spelt and JDSU Ottawa is to measure the creep properties of candidate adhesives and then develop and evaluate adhesive creep models to be used in FEA software for the prediction of creep in opto-electronic adhesive joints.