Grant: Engage Grants Program
McMaster University
$25,000.00
Single wall carbon nanotube networks for dissolved hydrogen peroxide detection
EF 2016-17
Résumé
Trojan Technologies has implemented an efficient, hydrogen peroxide based water treatment process that effectively removes organic contaminants and micro-organisms if combined with UV irradiation. A variety of water treatment facilities throughout the world employ this process using Trojan's UVPhox(TM) system with hydrogen peroxide for the treatment of various contaminants. In environmental contaminant treatments, Trojan Technologies apply a UV-oxidation process where UV converts hydrogen peroxide into highly reactive hydroxyl radicals to attack and decompose contaminants and at the same time UV light disinfects water, but residual hydrogen peroxide is often left behind. The effectiveness of the process can be determined from the residual amount of peroxide after the disinfection process. Furthermore, no residual hydrogen peroxide is permitted in drinking water. Again, knowledge of the efficiency of peroxide removal is desired. Therefore, there is a need for a sensor to determine hydrogen peroxide concentrations before and after treatment. The Kruse group has demonstrated a sensing mechanism for redox-active species in aqueous environments, based on oxidation and reduction of short chain aniline oligomer molecules to dope and undope single wall carbon nanotube films. A series of experiments with persulfate, ascorbic acid, and also free chlorine has shown promise of favorable performance, such as short response time and high sensitivity. Since hydrogen peroxide is a strong oxidant, sensors based on this concept should be capable of detecting hydrogen peroxide in the parts-per-million level and below. The issues that have to be addressed are: (a) proof of concept of a dissolved hydrogen peroxide sensor; (b) stability and reproducibility of the sensor, as well as interference effects of species commonly present in drinking water; (c) longterm stability and susceptibility to fouling by organic contaminants. This proposal seeks to address these issues in the case of an aqueous hydrogen peroxide sensor.The work will be performed in collaboration between Trojan Technologies and McMaster University. Trojan would like to commercialize our hydrogen peroxide sensors.
Programme
Engage Grants Program
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
492207-2015
Name nom
Kruse, Peter
Department département
Chemistry & Chemical Biology
Organization id
27
Institution établissement
McMaster University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2016
Competition year année de concours
2015
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
702
Area of application group en
Transportation systems and services
Area of application group fr
Services et systèmes de transport
Area of application en
Water
Area of application fr
Maritime
Research subject code
3402
Research subject group en
Physical chemistry
Research subject group fr
Chimie physique
Research subject en
Surface and interfacial chemistry
Research subject fr
Chimie des surfaces et des interfaces
Partie
1
Nb partie
1
Application title
Single wall carbon nanotube networks for dissolved hydrogen peroxide detection
Keyword
NSERC
Application summary
Trojan Technologies has implemented an efficient, hydrogen peroxide based water treatment process that effectively removes organic contaminants and micro-organisms if combined with UV irradiation. A variety of water treatment facilities throughout the world employ this process using Trojan's UVPhox(TM) system with hydrogen peroxide for the treatment of various contaminants. In environmental contaminant treatments, Trojan Technologies apply a UV-oxidation process where UV converts hydrogen peroxide into highly reactive hydroxyl radicals to attack and decompose contaminants and at the same time UV light disinfects water, but residual hydrogen peroxide is often left behind. The effectiveness of the process can be determined from the residual amount of peroxide after the disinfection process. Furthermore, no residual hydrogen peroxide is permitted in drinking water. Again, knowledge of the efficiency of peroxide removal is desired. Therefore, there is a need for a sensor to determine hydrogen peroxide concentrations before and after treatment. The Kruse group has demonstrated a sensing mechanism for redox-active species in aqueous environments, based on oxidation and reduction of short chain aniline oligomer molecules to dope and undope single wall carbon nanotube films. A series of experiments with persulfate, ascorbic acid, and also free chlorine has shown promise of favorable performance, such as short response time and high sensitivity. Since hydrogen peroxide is a strong oxidant, sensors based on this concept should be capable of detecting hydrogen peroxide in the parts-per-million level and below. The issues that have to be addressed are: (a) proof of concept of a dissolved hydrogen peroxide sensor; (b) stability and reproducibility of the sensor, as well as interference effects of species commonly present in drinking water; (c) longterm stability and susceptibility to fouling by organic contaminants. This proposal seeks to address these issues in the case of an aqueous hydrogen peroxide sensor.The work will be performed in collaboration between Trojan Technologies and McMaster University. Trojan would like to commercialize our hydrogen peroxide sensors.