Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Alliance Grants

Queen's University

$20,000.00

Enhancing the design of connections for fire resiliency

EF 2022-23

Résumé
Fire can lead to many structural damages for all materials, including steel. To ensure resiliency in a steel building, beam-column connections should be able to withstand the induced loading due to fire. To better understand the structural behaviour of these connections under fire with the final objective to ensure an optimized fire protection, finite element analysis (FEA) can be considered. Advanced FEA can supplement experimental data since full scale fire tests are expensive and difficult to be conducted. The current project will use the FEA software LS-DYNA to perform all analyses, since LS-DYNA is widely used in commercial projects in the consulting industry. First, a heat transfer analysis will be done followed by the cyclic loading analysis. The heat transfer analysis will consider different fire scenarios where subroutines in LS-DYNA will be developed into the explicit dynamic solver. The FEA will consider different thermal conductivity material properties for the steel to evaluate the examined fire protective materials. The FEA will focus on modeling three different connections that will vary in ductility (double angle, single angle and shear tab). The numerical results will evaluate different passive fire protection systems of the connections, e.g., spray-applied fire-resistive materials. The developed FEA models will consider heat dissipation and, based on the developed stresses and deformations after the fire scenarios, an optimal design that balances safety with economic and aesthetic specifications will be proposed. Finally, a framework will be developed to connect and update the initial design models from Revit with LS-DYNA. The analysis results aim to propose safe design by considering the reduction of the construction cost of steel structures. The goal of the proposed partnership is to significantly advance the state of knowledge related to an effective design of resilient steel connections of buildings when exposed thermal loadings and propose a safe design approach by considering reduction of the construction cost of such steel structures.
Programme
Alliance Grants
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
561250-2020
Name nom
Genikomsou, Aikaterini A
Department département
Civil Engineering
Organization id
29
Institution établissement
Queen's University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2022
Competition year année de concours
2020
Award amount
20000
Program id
ALLRP
Program name en
Alliance Grants
Program name fr
Subventions Alliance
Group en
RESEARCH PARTNERSHIPS
Group fr
PARTENARIATS DE RECHERCHE
Committee code
96
Committee name en
RPP Internal Decision Cttee
Committee name fr
Cté de décision interne - PPR
Area of application code
602
Area of application group en
Construction, urban and rural planning
Area of application group fr
Construction, urbanisme et aménagement rural
Area of application en
Materials performance
Area of application fr
Performance des matériaux
Research subject code
1000
Research subject group en
Civil engineering
Research subject group fr
Génie civil
Research subject en
Civil engineering
Research subject fr
Génie civil
Installment
inst:2
Partie
1
Nb partie
2
Application title
Enhancing the design of connections for fire resiliency
Application summary
Fire can lead to many structural damages for all materials, including steel. To ensure resiliency in a steel building, beam-column connections should be able to withstand the induced loading due to fire. To better understand the structural behaviour of these connections under fire with the final objective to ensure an optimized fire protection, finite element analysis (FEA) can be considered. Advanced FEA can supplement experimental data since full scale fire tests are expensive and difficult to be conducted. The current project will use the FEA software LS-DYNA to perform all analyses, since LS-DYNA is widely used in commercial projects in the consulting industry. First, a heat transfer analysis will be done followed by the cyclic loading analysis. The heat transfer analysis will consider different fire scenarios where subroutines in LS-DYNA will be developed into the explicit dynamic solver. The FEA will consider different thermal conductivity material properties for the steel to evaluate the examined fire protective materials. The FEA will focus on modeling three different connections that will vary in ductility (double angle, single angle and shear tab). The numerical results will evaluate different passive fire protection systems of the connections, e.g., spray-applied fire-resistive materials. The developed FEA models will consider heat dissipation and, based on the developed stresses and deformations after the fire scenarios, an optimal design that balances safety with economic and aesthetic specifications will be proposed. Finally, a framework will be developed to connect and update the initial design models from Revit with LS-DYNA. The analysis results aim to propose safe design by considering the reduction of the construction cost of steel structures. The goal of the proposed partnership is to significantly advance the state of knowledge related to an effective design of resilient steel connections of buildings when exposed thermal loadings and propose a safe design approach by considering reduction of the construction cost of such steel structures.