Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Discovery Grants Program - Individual

University of Alberta

$30,000.00

Ceramic electrolytes and secondary recovery

EF 2012-13

Résumé
Ceramic electrolyte work centers on two applications - electrochemical sensors and solid oxide fuel cells. During steelmaking, liquid steel picks up oxygen from the air. It is essential to measure it as it affects casting behaviour and mechanical properties. To overcome inaccuracy of commercially available probes based on stabilized zirconia especially at low oxygen contents (referred to as clean steel), the highly stable yttria-calcia and dysprosia-calcia systems are being studied, especially electrical properties. Thermal and redox cycling resistance, fuel impurities and long-term microstructural stability continue to plague commercial development of high temperature fuel cells. Non-hydrogen fuels, e.g., natural gas, syngas from coal, will only be possible if fuel electrode (anode) materials that resist sulphur poisoning and carbon deposition can be identified. Both thermal cycling and redox cycling (air enters the fuel chamber oxidizing and expanding the electrode) cause cracking and delamination. This can be avoided by fabricating a porous support (same material as the electrolyte) by slip casting to act as the main structural component. The ceramic powders used to prepare the slurry for casting (slip) must have been previously heated to 1300-1500C to create a fine pore network. However, anode impregnation (initially nickel) into the support must be feasible and will be studied. Tungsten carbide is under consideration as an anode material. It has a very stable microstructure (resists sintering), appears to tolerate a moderate amount of sulphur and does not nucleate carbon deposition. Regarding secondary recovery, to deal with industrial waste disposal problems and/or recover valuable metals, transformational roasting (heating in air at 500-1000C) has been considered whereby one or more solid reagents are added to the material prior to roasting to rapidly alter the minerals present to either sequester toxic metals or liberate valuable ones. It has been applied to oil sands fly ash and electric arc furnace steelmaking dust with mixed results, but successfully applied to zinc ferrite residue and nickel sulphide electrowinning concentrate. It may have wide applicability to industrial processes.
Programme
Discovery Grants Program - Individual
Bénéficiaire
Emplacement
Alberta, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
3536-2011
Name nom
Etsell, Thomas
Department département
Chemical and Materials Engineering
Organization id
9
Institution établissement
University of Alberta
Province en
Alberta
Province fr
Alberta
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2012
Competition year année de concours
2011
Award amount
30000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1511
Committee name en
Materials and Chemical Engineering
Committee name fr
Génie chimique et des matériaux
Area of application code
511
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Ceramic, glass and industrial mineral products
Area of application fr
Céramique, verre et autres produits minéraux industriels
Research subject code
2005
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Ceramics
Research subject fr
Céramiques
Partie
2
Nb partie
5
Application title
Ceramic electrolytes and secondary recovery
Keyword
NSERC
Application summary
Ceramic electrolyte work centers on two applications - electrochemical sensors and solid oxide fuel cells. During steelmaking, liquid steel picks up oxygen from the air. It is essential to measure it as it affects casting behaviour and mechanical properties. To overcome inaccuracy of commercially available probes based on stabilized zirconia especially at low oxygen contents (referred to as clean steel), the highly stable yttria-calcia and dysprosia-calcia systems are being studied, especially electrical properties. Thermal and redox cycling resistance, fuel impurities and long-term microstructural stability continue to plague commercial development of high temperature fuel cells. Non-hydrogen fuels, e.g., natural gas, syngas from coal, will only be possible if fuel electrode (anode) materials that resist sulphur poisoning and carbon deposition can be identified. Both thermal cycling and redox cycling (air enters the fuel chamber oxidizing and expanding the electrode) cause cracking and delamination. This can be avoided by fabricating a porous support (same material as the electrolyte) by slip casting to act as the main structural component. The ceramic powders used to prepare the slurry for casting (slip) must have been previously heated to 1300-1500C to create a fine pore network. However, anode impregnation (initially nickel) into the support must be feasible and will be studied. Tungsten carbide is under consideration as an anode material. It has a very stable microstructure (resists sintering), appears to tolerate a moderate amount of sulphur and does not nucleate carbon deposition. Regarding secondary recovery, to deal with industrial waste disposal problems and/or recover valuable metals, transformational roasting (heating in air at 500-1000C) has been considered whereby one or more solid reagents are added to the material prior to roasting to rapidly alter the minerals present to either sequester toxic metals or liberate valuable ones. It has been applied to oil sands fly ash and electric arc furnace steelmaking dust with mixed results, but successfully applied to zinc ferrite residue and nickel sulphide electrowinning concentrate. It may have wide applicability to industrial processes.