Grant: Discovery Grants Program - Individual
University of Manitoba
$21,000.00
Bridge Weigh-in-Motion
EF 2014-15
Résumé
The main objective of the proposed research program is to develop a new bridge Weigh in Motion (BWIM) system to calculate vehicle parameters such as truck speed and gross vehicle weight. In a realistic bridge design code, the design live loads should be based on actual traffic loads. In the past, the information about the actual traffic loads on highway bridges was obtained from truck surveys, in which the trucks are stopped for measurement and weighed on 'static' weighing scales. During the past few decades, the information about the truck loads has been collected while the trucks are moving at normal speeds. Some of the weighing-in-motion (WIM) scales are installed in the pavement. In other WIM systems, a highway bridge is used for the weighing-in-motion of the trucks; this latter system is referred to as the bridge WIM (BWIM) system, and the system installed in the pavement as simply the WIM system. Over the past few decades, a number of BWIM systems, with varying degrees of accuracy in predicting the axle and gross vehicle weights of the trucks, have been introduced. Two important factors in deciding upon the selection of an appropriate BWIM system are its cost and the accuracy of its prediction. The pavement WIM systems, invariably proprietary and more expensive than the BWIM systems, are usually assumed to be more accurate than the BWIM systems. The accuracy of the BWIM technology developed in this proposed research program will be established through a number of field calibration tests on a bridge in Manitoba.Fatigue analysis is an important consideration for evaluating the health of the bridges. To develop a fatigueanalysis, load and resistance are two essential concerns. In fact, the load due to a traffic vehicle differs considerably from the designed load. To estimate the remaining fatigue life more accurately, a refined evaluation load procedure is desirable. One of the goals of this research is to incorporate BWIM technology into Structure Health Monitoring (SHM) data analysis to understand the performance of the bridges and establish fatigue life of the girders and the decks.
Programme
Discovery Grants Program - Individual
Bénéficiaire
Emplacement
Manitoba, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
122335-2013
Name nom
Mufti, Aftab
Department département
Civil Engineering
Organization id
19
Institution établissement
University of Manitoba
Province en
Manitoba
Province fr
Manitoba
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2014
Competition year année de concours
2013
Award amount
21000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1509
Committee name en
Civil, Industrial and Systems Engineering
Committee name fr
Génie civil, industriel et des systèmes
Area of application code
601
Area of application group en
Construction, urban and rural planning
Area of application group fr
Construction, urbanisme et aménagement rural
Area of application en
Structural engineering
Area of application fr
Génie des charpentes
Research subject code
1100
Research subject group en
Structural engineering
Research subject group fr
Génie des structures
Research subject en
Structural engineering
Research subject fr
Génie des structures
Partie
2
Nb partie
5
Application title
Bridge Weigh-in-Motion
Keyword
NSERC
Application summary
The main objective of the proposed research program is to develop a new bridge Weigh in Motion (BWIM) system to calculate vehicle parameters such as truck speed and gross vehicle weight. In a realistic bridge design code, the design live loads should be based on actual traffic loads. In the past, the information about the actual traffic loads on highway bridges was obtained from truck surveys, in which the trucks are stopped for measurement and weighed on 'static' weighing scales. During the past few decades, the information about the truck loads has been collected while the trucks are moving at normal speeds. Some of the weighing-in-motion (WIM) scales are installed in the pavement. In other WIM systems, a highway bridge is used for the weighing-in-motion of the trucks; this latter system is referred to as the bridge WIM (BWIM) system, and the system installed in the pavement as simply the WIM system. Over the past few decades, a number of BWIM systems, with varying degrees of accuracy in predicting the axle and gross vehicle weights of the trucks, have been introduced. Two important factors in deciding upon the selection of an appropriate BWIM system are its cost and the accuracy of its prediction. The pavement WIM systems, invariably proprietary and more expensive than the BWIM systems, are usually assumed to be more accurate than the BWIM systems. The accuracy of the BWIM technology developed in this proposed research program will be established through a number of field calibration tests on a bridge in Manitoba.Fatigue analysis is an important consideration for evaluating the health of the bridges. To develop a fatigueanalysis, load and resistance are two essential concerns. In fact, the load due to a traffic vehicle differs considerably from the designed load. To estimate the remaining fatigue life more accurately, a refined evaluation load procedure is desirable. One of the goals of this research is to incorporate BWIM technology into Structure Health Monitoring (SHM) data analysis to understand the performance of the bridges and establish fatigue life of the girders and the decks.