Grant: Discovery Grants Program - Individual
University of Windsor
$20,000.00
PVD coatings and their failure behavior under extreme high contact stresses
EF 2009-10
Résumé
Physical vapor deposition (PVD) coatings can be strategically applied on relatively small stamping die inserts which are installed in the areas where severe wear may occur. This approach is most likely necessary because PVD coatings can have a much higher hardness and wear resistance than electroplated or electroless coatings and nitrided steels. Lab tests are usually used to evaluate the PVD coatings before actual production applications. Spallation is the main failure mechanism of PVD hard coatings in stamping applications, which can not be observed in lab tests conducted in operating conditions that do not correspond to actual productions. In the proposed research, pin-on-disc sliding wear tests, ball-on-plate impact fatigue tests, and extended impact fatigue tests with additional sliding motions under ultra high contact stress will be chosen as the accelerated lab tests to simulate the wear conditions of spallation failures.
The objective of the proposed project is to have a better understanding of compositional gradient PVD coatings and coating failure behaviours so that the strategic use of PVD coatings will be one of the solutions in dealing with wear problems. In the project, i) PVD coatings with functional gradient mechanical properties will be prepared using an emerging high-power pulsed magnetron sputtering (HPPMS) technology; ii) accelerated tests with testing conditions similar to actual stresses in productions will be used to determine spallation behaviours for various combinations of different coatings with different die substrate materials; and iii) the effects of coating composition gradient and substrate surface finish on the coating failures will be investigated. After completion of these fundamental studies, recommendation on selections of coating and substrate materials and methods of substrate surface preparation will be made for industrial tests and applications. The research will create new knowledge in the areas of materials, coatings, surface engineering, and manufacturing, also lead to the development of new collaborative research projects with Canadian automakers and die/mould makers in the future, and greatly enhance HQP training as well.
Programme
Discovery Grants Program - Individual
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
283310-2009
Name nom
Nie, Xueyuan
Department département
Mechanical, Automotive and Materials Engineering
Organization id
37
Institution établissement
University of Windsor
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2009
Competition year année de concours
2009
Award amount
20000
Program id
RGPIN
Program nane en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
4
Committee name en
Chem. & Metallurgical Eng.
Committee name fr
Génies chimique et métal.
Area of application code
1208
Area of application group en
Advancement of knowledge
Area of application group fr
Avancement des connaissances
Area of application en
Materials sciences
Area of application fr
Sciences des matériaux
Research subject code
2002
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials processing
Research subject fr
Transformation des matériaux
Partie
1
Nb partie
5
Application title
PVD coatings and their failure behavior under extreme high contact stresses
Keyword
NA
Application summary
Physical vapor deposition (PVD) coatings can be strategically applied on relatively small stamping die inserts which are installed in the areas where severe wear may occur. This approach is most likely necessary because PVD coatings can have a much higher hardness and wear resistance than electroplated or electroless coatings and nitrided steels. Lab tests are usually used to evaluate the PVD coatings before actual production applications. Spallation is the main failure mechanism of PVD hard coatings in stamping applications, which can not be observed in lab tests conducted in operating conditions that do not correspond to actual productions. In the proposed research, pin-on-disc sliding wear tests, ball-on-plate impact fatigue tests, and extended impact fatigue tests with additional sliding motions under ultra high contact stress will be chosen as the accelerated lab tests to simulate the wear conditions of spallation failures.
The objective of the proposed project is to have a better understanding of compositional gradient PVD coatings and coating failure behaviours so that the strategic use of PVD coatings will be one of the solutions in dealing with wear problems. In the project, i) PVD coatings with functional gradient mechanical properties will be prepared using an emerging high-power pulsed magnetron sputtering (HPPMS) technology; ii) accelerated tests with testing conditions similar to actual stresses in productions will be used to determine spallation behaviours for various combinations of different coatings with different die substrate materials; and iii) the effects of coating composition gradient and substrate surface finish on the coating failures will be investigated. After completion of these fundamental studies, recommendation on selections of coating and substrate materials and methods of substrate surface preparation will be made for industrial tests and applications. The research will create new knowledge in the areas of materials, coatings, surface engineering, and manufacturing, also lead to the development of new collaborative research projects with Canadian automakers and die/mould makers in the future, and greatly enhance HQP training as well.