Grant: Engage Grants Program
University of Ottawa
$25,000.00
Printed Electronics Fabrication of Laminated Conductors for Loss Reduction in RF Circuits
EF 2017-18
Résumé
Printed electronics (PE) differs from conventional subtractive (eg. etching) fabrication methods and is insteadone of a number of methods to fabricate circuits/devices by additively depositing conducting or dielectric(insulating) material. These include traditional printing methods like flexography, and more recently developedtechniques like aerosol-jet printing. PE methods offer lower fabrication costs and are suited to flexiblesubstrates. They have not yet found widespread use at high wireless communications (RF) frequencies. Thereason is this : RF circuits are usually comprised of conducting metallic patterns printed on dielectricsubstrates. Subtractive fabrication methods are suited to produce conducting tracks as single thick (relativelyspeaking) conducting layers. But no matter how thick the conductor is, the so-called electromagnetic skin effectresults in the current flowing within a thin layer of the conductor. Thus the effective resistance (and henceunwanted power losses) is larger than it could be if the current could be made to spread over a larger crosssection of the conducting track. How this can be achieved was in fact shown in 1951, namely that instead of asingle conducting layer one should use laminated conductors comprised of very thin conducting layersseparated by extremely thin dielectric material, of just the correct thicknesses. Electromagnetic fieldpenetration of this laminated conductor can then be many skin depths thick and the currents will as a resultflow over larger portions of the available conductor cross-sections. This results in greatly decreased powerlosses. But subtractive fabrication methods are not suited to making laminated conductor circuits. This researchwill use computational electromagnetics analysis to design laminated conductor circuits, and PE flexography tofabricate them in an effort to start making PE fabrication methods available for RF circuits. One possibleapplication is by a Canadian company developing one of the world's first fully integrated advanced headprotection solutions for security and military personnel.
Programme
Engage Grants Program
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
513463-2017
Name nom
McNamara, Derek
Department département
Electrical Engineering and Computer Science , School of
Organization id
28
Institution établissement
University of Ottawa
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2017
Competition year année de concours
2017
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
805
Area of application group en
Information and communication services
Area of application group fr
Services d'information et de télécommunications
Area of application en
Communications technologies (satellites, radar, etc.)
Area of application fr
Technologie des télécommunications (satellites, radar,etc.)
Research subject code
2511
Research subject group en
Electrical and electronic engineering
Research subject group fr
Génie électrique et électronique
Research subject en
Antennas and propagation
Research subject fr
Antennes et propagation
Partie
1
Nb partie
1
Application title
Printed Electronics Fabrication of Laminated Conductors for Loss Reduction in RF Circuits
Keyword
NSERC
Application summary
Printed electronics (PE) differs from conventional subtractive (eg. etching) fabrication methods and is insteadone of a number of methods to fabricate circuits/devices by additively depositing conducting or dielectric(insulating) material. These include traditional printing methods like flexography, and more recently developedtechniques like aerosol-jet printing. PE methods offer lower fabrication costs and are suited to flexiblesubstrates. They have not yet found widespread use at high wireless communications (RF) frequencies. Thereason is this : RF circuits are usually comprised of conducting metallic patterns printed on dielectricsubstrates. Subtractive fabrication methods are suited to produce conducting tracks as single thick (relativelyspeaking) conducting layers. But no matter how thick the conductor is, the so-called electromagnetic skin effectresults in the current flowing within a thin layer of the conductor. Thus the effective resistance (and henceunwanted power losses) is larger than it could be if the current could be made to spread over a larger crosssection of the conducting track. How this can be achieved was in fact shown in 1951, namely that instead of asingle conducting layer one should use laminated conductors comprised of very thin conducting layersseparated by extremely thin dielectric material, of just the correct thicknesses. Electromagnetic fieldpenetration of this laminated conductor can then be many skin depths thick and the currents will as a resultflow over larger portions of the available conductor cross-sections. This results in greatly decreased powerlosses. But subtractive fabrication methods are not suited to making laminated conductor circuits. This researchwill use computational electromagnetics analysis to design laminated conductor circuits, and PE flexography tofabricate them in an effort to start making PE fabrication methods available for RF circuits. One possibleapplication is by a Canadian company developing one of the world's first fully integrated advanced headprotection solutions for security and military personnel.