Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Engage Plus Grants Program

University of Manitoba

$10,870.00

Multi-Physics Modeling of Jet Engine Clearance Sensor - Phase II

EF 2017-18

Résumé
In jet engine design knowledge of the clearance between an airfoil blade tip and engine housing is an importantfactor that can dramatically affect engine performance. This gap can change due to extreme temperaturevariations and high centrifugal and torsional forces. GE Aviation has developed a sensor to monitor airfoilclearance. The sensor is mounted in the engine housing and is based on sensing the capacitance change as theblade passes over a probe. The probe is coupled to a cavity and resonator based electronics, which produces anoutput signal. Accurate measurement of the clearance requires modeling and calibration of the sensor. GEAviation will be partnering with Dr. G.E. Bridges at the University of Manitoba to develop a multi-physicsmodel for determining the capacitance change measured by the clearance probe and use this to calibrate thesensor output signal. In Phase I a model of the probe tip-blade for different geometries and materials wasdeveloped. In Phase II, the coupled cavity and electronics will be modeled. The model will be based onelectromagnetic simulation. Experimental verification will be performed using a bench-top spin-rig system,built by GE Aviation for testing their clearance sensor. A PhD student from the University of Manitoba withexpertise in computational electromagnetics will develop and verify the calibration model. In addition toproviding details of the clearance sensor, GE Aviation will provide a bench-top spin-rig system and aid inobtaining measured results. GE Aviation is one of the worlds top suppliers of aircraft engines and offersengines for military and commercial aircraft. The calibration model developed in this project will provide animportant component for the accurate use of GE Aviation's clearance probe, subsequently aiding in improveddesign and performance of their jet engines.
Programme
Engage Plus Grants Program
Emplacement
Manitoba, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
515262-2017
Name nom
Bridges, Greg
Department département
Electrical and Computer Engineering
Organization id
19
Institution établissement
University of Manitoba
Province en
Manitoba
Province fr
Manitoba
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2017
Competition year année de concours
2017
Award amount
10870
Program id
EGP2
Program name en
Engage Plus Grants Program
Program name fr
Programme de subvention d'engagement partenarial Plus
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1555
Committee name en
Prairie Internal Decision Committee
Committee name fr
Comité de décision interne pour les Prairies
Area of application code
703
Area of application group en
Transportation systems and services
Area of application group fr
Services et systèmes de transport
Area of application en
Aerospace
Area of application fr
Aérospatial
Research subject code
2518
Research subject group en
Electrical and electronic engineering
Research subject group fr
Génie électrique et électronique
Research subject en
Instrumentation and measurements
Research subject fr
Instrumentation et mesures
Partie
1
Nb partie
1
Application title
Multi-Physics Modeling of Jet Engine Clearance Sensor - Phase II
Keyword
NSERC
Application summary
In jet engine design knowledge of the clearance between an airfoil blade tip and engine housing is an importantfactor that can dramatically affect engine performance. This gap can change due to extreme temperaturevariations and high centrifugal and torsional forces. GE Aviation has developed a sensor to monitor airfoilclearance. The sensor is mounted in the engine housing and is based on sensing the capacitance change as theblade passes over a probe. The probe is coupled to a cavity and resonator based electronics, which produces anoutput signal. Accurate measurement of the clearance requires modeling and calibration of the sensor. GEAviation will be partnering with Dr. G.E. Bridges at the University of Manitoba to develop a multi-physicsmodel for determining the capacitance change measured by the clearance probe and use this to calibrate thesensor output signal. In Phase I a model of the probe tip-blade for different geometries and materials wasdeveloped. In Phase II, the coupled cavity and electronics will be modeled. The model will be based onelectromagnetic simulation. Experimental verification will be performed using a bench-top spin-rig system,built by GE Aviation for testing their clearance sensor. A PhD student from the University of Manitoba withexpertise in computational electromagnetics will develop and verify the calibration model. In addition toproviding details of the clearance sensor, GE Aviation will provide a bench-top spin-rig system and aid inobtaining measured results. GE Aviation is one of the worlds top suppliers of aircraft engines and offersengines for military and commercial aircraft. The calibration model developed in this project will provide animportant component for the accurate use of GE Aviation's clearance probe, subsequently aiding in improveddesign and performance of their jet engines.