Grant: Research Tools and Instruments - Category 1 (<$150,000)
University of British Columbia
$33,708.00
Toolkit for evaluation of micorfluidic fuel cell performance
EF 2009-10
Résumé
Recently, there has been a growing demand for a small but high power source of energy for portable devices. The current battery technology can hardly meet this growing power demand. A recent comparison between Li-ion batteries and fuel cells has shown that the latter have much higher power density and hence more potential to respond to the future supply and demand. Further, miniaturization of the fuel cells can increase their power density by increasing the surface-to-volume ratio. Technological and physical issues, however, restrict the miniaturization process. This has motivated the emergence of microfluidic fuel cells as a new generation of the fuel cell technology. Microfluidic fuel cells take advantage of laminar flow in a microchannel to keep the fuel and oxidant separate. Therefore, the membrane is no longer required for fuel and oxidant separation, and hence, the membrane-related issues are eliminated. However, the power density and fuel utilization of these devices have not been fully optimized for current portable applications. The efficiency of these devices is limited due to 1) the depletion of reactants at the vicinity of the activation site, and 2) mixing of the fuel and oxidant because of the diffusion phenomenon. It has been shown that the microchannel geometry has a significant effect on these factors. Through multiphysics modeling, the applicant and her group have introduced an innovative geometry which significantly enhances the cell power and fuel utilization compared to the existing geometries. Also, the group has designed and developed a prototype based on the proposed geometry and now needs to evaluate the performance through experiments. To conduct these experiments, the applicant requires 1) a potentionstat device to measure the cell power while maintaining the potential across the cell constant, and 2) a pump system to inject the reactants into the microchannel at tightly controlled flow rates. The applicant's Fuel Cell Research Laboratory is equipped with the fabrication facility required to build the microchannel. The proposed equipment will facilitate the measurement of the fuel cell power and fuel utilization which will be compared to the results obtained from modeling.
Programme
Research Tools and Instruments - Category 1 (<$150,000)
Bénéficiaire
Emplacement
British Columbia, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
390333-2010
Name nom
Hoorfar, Mina
Department département
Okanagan - Engineering, School of
Organization id
2
Institution établissement
University of British Columbia
Province en
British Columbia
Province fr
Colombie-Britannique
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2009
Competition year année de concours
2010
Award amount
33708
Program id
EQPEQ
Program nane en
Research Tools and Instruments - Category 1 (<$150,000)
Program name fr
Outils et instruments de recherche - catégorie 1 (<150 000$)
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
303
Area of application group en
Energy resources
Area of application group fr
Ressources d'énergie
Area of application en
Alternative energy resources
Area of application fr
Autres ressources d'énergie
Research subject code
2303
Research subject group en
Fuel and energy technology
Research subject group fr
Combustibles et technologie de l'énergie
Research subject en
Other sources of energy (solar, wind, etc.)
Research subject fr
Autres sources d'énergie (combustibles solaire, éolien, etc).
Partie
1
Nb partie
1
Application title
Toolkit for evaluation of micorfluidic fuel cell performance
Keyword
NA
Application summary
Recently, there has been a growing demand for a small but high power source of energy for portable devices. The current battery technology can hardly meet this growing power demand. A recent comparison between Li-ion batteries and fuel cells has shown that the latter have much higher power density and hence more potential to respond to the future supply and demand. Further, miniaturization of the fuel cells can increase their power density by increasing the surface-to-volume ratio. Technological and physical issues, however, restrict the miniaturization process. This has motivated the emergence of microfluidic fuel cells as a new generation of the fuel cell technology. Microfluidic fuel cells take advantage of laminar flow in a microchannel to keep the fuel and oxidant separate. Therefore, the membrane is no longer required for fuel and oxidant separation, and hence, the membrane-related issues are eliminated. However, the power density and fuel utilization of these devices have not been fully optimized for current portable applications. The efficiency of these devices is limited due to 1) the depletion of reactants at the vicinity of the activation site, and 2) mixing of the fuel and oxidant because of the diffusion phenomenon. It has been shown that the microchannel geometry has a significant effect on these factors. Through multiphysics modeling, the applicant and her group have introduced an innovative geometry which significantly enhances the cell power and fuel utilization compared to the existing geometries. Also, the group has designed and developed a prototype based on the proposed geometry and now needs to evaluate the performance through experiments. To conduct these experiments, the applicant requires 1) a potentionstat device to measure the cell power while maintaining the potential across the cell constant, and 2) a pump system to inject the reactants into the microchannel at tightly controlled flow rates. The applicant's Fuel Cell Research Laboratory is equipped with the fabrication facility required to build the microchannel. The proposed equipment will facilitate the measurement of the fuel cell power and fuel utilization which will be compared to the results obtained from modeling.