Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Research Tools and Instruments - Category 1 (<$150,000)

McMaster University

$30,406.00

Hot oil temperature control unit for characterization of thermal management systems and devices

EF 2007-08

Résumé
The accurate characterization of many thermal management systems and devices, such as waste heat recovery systems, single and two-phase heat exchangers, heat pipes and capillary pumped loops, requires stable heat sources and heat sinks. In many applications it is fairly straight forward to design controllable heat sources using electrical heaters and controllers. The design of cooling systems is much more difficult, and in many instances it is done using a cooling loop.  For cooling applications at temperatures below ambient, a chiller is necessary and for operation at elevated temperatures, an additional heating coil/loop is required. When water is used as the working fluid, as done commonly, the operating temperature range of the cooling loop is limited to the saturation temperature. For temperatures above 100 degrees C, the system needs to be operated under pressure to prevent boiling, which can be cumbersome to design and operate.  There are several projects of the applicants where both heating and cooling are required at elevated temperatures. Currently, there are several vendors that supply high temperature control units that can be used to supply a stable flow of oil for both heating and cooling for different process applications. These units typically operate at temperatures up to about 350 degrees C, with a temperature stability of plus/minus 1 degree C and power ratings up to 100 kW. Funds are requested to purchase such a unit with the necessary instrumentation to characterize several thermal managament devices that are currently being developed by the applicants. The instrumentation requested here for the unit will allow accurate measurements of the heat flux and pressure drop in these devices. This will be important to quantify the performance and develop improvement strategies for these systems. The equipment will be primarily used by graduate students working on these projects, and will significantly enhance their research.
Programme
Research Tools and Instruments - Category 1 (<$150,000)
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
360007-2008
Name nom
Ching, Chan
Department département
Mechanical Engineering
Organization id
27
Institution établissement
McMaster University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2007
Competition year année de concours
2008
Award amount
30406
Program id
EQPEQ
Program name en
Research Tools and Instruments - Category 1 (<$150,000)
Program name fr
Outils et instruments de recherche - catégorie 1 (<150 000$)
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1054
Committee name en
Mechanical Engineering - B
Committee name fr
Génie mécanique - B
Area of application code
305
Area of application group en
Energy resources
Area of application group fr
Ressources d'énergie
Area of application en
Energy storage and conversion
Area of application fr
Stockage et transformation de l'énergie
Research subject code
2100
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Mechanical engineering
Research subject fr
Génie mécanique
Partie
1
Nb partie
1
Application title
Hot oil temperature control unit for characterization of thermal management systems and devices
Keyword
NA
Application summary
The accurate characterization of many thermal management systems and devices, such as waste heat recovery systems, single and two-phase heat exchangers, heat pipes and capillary pumped loops, requires stable heat sources and heat sinks. In many applications it is fairly straight forward to design controllable heat sources using electrical heaters and controllers. The design of cooling systems is much more difficult, and in many instances it is done using a cooling loop.  For cooling applications at temperatures below ambient, a chiller is necessary and for operation at elevated temperatures, an additional heating coil/loop is required. When water is used as the working fluid, as done commonly, the operating temperature range of the cooling loop is limited to the saturation temperature. For temperatures above 100 degrees C, the system needs to be operated under pressure to prevent boiling, which can be cumbersome to design and operate.  There are several projects of the applicants where both heating and cooling are required at elevated temperatures. Currently, there are several vendors that supply high temperature control units that can be used to supply a stable flow of oil for both heating and cooling for different process applications. These units typically operate at temperatures up to about 350 degrees C, with a temperature stability of plus/minus 1 degree C and power ratings up to 100 kW. Funds are requested to purchase such a unit with the necessary instrumentation to characterize several thermal managament devices that are currently being developed by the applicants. The instrumentation requested here for the unit will allow accurate measurements of the heat flux and pressure drop in these devices. This will be important to quantify the performance and develop improvement strategies for these systems. The equipment will be primarily used by graduate students working on these projects, and will significantly enhance their research.