Grant: Discovery Grants Program - Individual
McGill University
$92,000.00
INVESTIGATION OF THERMOELASTIC AND DYNAMIC PHENOMENA FOR IMPROVED DESIGN AND CONTROL OF MANUFACTURING AND TRIBOLOGICAL SYSTEMS
EF 2024-25
Résumé
This proposal deals with high performance machining processes and the prediction of fretting wear under complex excitation. These issues are interrelated, since the integrity of machined surfaces controls its tribological behaviour. Four projects P1 to P4 are proposed:
P1-Development of a real-time tool wear prediction, and pre-failure detection system
In Phase-1, a novel approach was developed to detect and stop the turning operation before tool chipping (within 20 milliseconds). The objective of the proposed work is to extend this approach to monitoring tool wear level and to detect tool pre-failure in high speed milling of Ti alloys and difficult-to-cut materials, where thermal effects have significant effect. The system should also be operating in the presence of an adaptive control system. Outcome and impact: It is anticipated the proposed system will be unique and can reduce the cost by 20%.
P2-Process development for cryogenic deep-hole drilling
Building on the success in Phase-1 for turning, the objective is to develop a cryogenic deep hole drilling process, using liquid nitrogen (LiN), overcoming the challenge of injecting LiN in a confined space through a rotating tool. Combining LiN with a minimum quantity lubrication (MQL) jet will be investigated, through CFD modeling to understand the flow characteristics of the dual LiN and MQL jets when supplied through the tool. Comparison between the performance of LiN and supercritical CO2 cryogens will be carried out. Outcome and impact: Compared to flood cooling of Ti6Al4V, it is anticipated that the tool life improvement will be ~ 100% and the environmental impact will be two orders of magnitude.
P3-Development of a mixed-regime vibration-assisted drilling (VAD) process for hybrid stacked composites-metal structure
The objective is to develop a novel mixed-regime VAD process that superimposes low frequency-high amplitude (LFHA ) and high frequency-low amplitude (HFLA) excitations to explore the possibility of gaining the benefits of both regimes and to allow adaptive control of the process through adjustment of the frequency/amplitude levels and/or the feedrate when drilling FRP/metal stacks. Outcome and impact: From simulation results, it is anticipated that the reduction in forces and temperature will exceed the individual benefits of each regime. As enabling technology, this development will overcome the challenges of robotized machining of stacked structures.
P4-Modeling and experimental investigation of fretting wear under random vibration
The main objective is to extend the `generalized fretting wear theory' proposed by the applicant to predict the damage under random excitation, and to develop a new experimental methodology for the standardization of fretting wear tests under random excitations. Outcome and impact: Preliminary test results showed that conventional sinusoidal excitation testing is non-conservative and could have significant safety and economic implications.
Programme
Discovery Grants Program - Individual
Bénéficiaire
Emplacement
Quebec, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
RGPIN-2020-06223
Name nom
Attia, Mahmoud
Department département
Mechanical Engineering - Mechanical Engineering
Organization id
61
Institution établissement
McGill University
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2024
Competition year année de concours
2020
Award amount
92000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
DISCOVERY RESEARCH
Group fr
RECHERCHE AXÉE SUR LA DÉCOUVERTE
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2109
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Mechanical systems and instrumentation
Research subject fr
Instrumentation et systèmes mécaniques
Field of research list names en
Not available
Field of research list names fr
Non disponible
Socioeconomic objective list names en
Not available
Socioeconomic objective list names fr
Non disponible
Application title
INVESTIGATION OF THERMOELASTIC AND DYNAMIC PHENOMENA FOR IMPROVED DESIGN AND CONTROL OF MANUFACTURING AND TRIBOLOGICAL SYSTEMS
Keywords
material removal processes; hybrid manufacturing processes; real-time condition monitoring; process optimization and control; tribology; fretting wear and fatigue; heat transfer
Application summary
This proposal deals with high performance machining processes and the prediction of fretting wear under complex excitation. These issues are interrelated, since the integrity of machined surfaces controls its tribological behaviour. Four projects P1 to P4 are proposed:
P1-Development of a real-time tool wear prediction, and pre-failure detection system
In Phase-1, a novel approach was developed to detect and stop the turning operation before tool chipping (within 20 milliseconds). The objective of the proposed work is to extend this approach to monitoring tool wear level and to detect tool pre-failure in high speed milling of Ti alloys and difficult-to-cut materials, where thermal effects have significant effect. The system should also be operating in the presence of an adaptive control system. Outcome and impact: It is anticipated the proposed system will be unique and can reduce the cost by 20%.
P2-Process development for cryogenic deep-hole drilling
Building on the success in Phase-1 for turning, the objective is to develop a cryogenic deep hole drilling process, using liquid nitrogen (LiN), overcoming the challenge of injecting LiN in a confined space through a rotating tool. Combining LiN with a minimum quantity lubrication (MQL) jet will be investigated, through CFD modeling to understand the flow characteristics of the dual LiN and MQL jets when supplied through the tool. Comparison between the performance of LiN and supercritical CO2 cryogens will be carried out. Outcome and impact: Compared to flood cooling of Ti6Al4V, it is anticipated that the tool life improvement will be ~ 100% and the environmental impact will be two orders of magnitude.
P3-Development of a mixed-regime vibration-assisted drilling (VAD) process for hybrid stacked composites-metal structure
The objective is to develop a novel mixed-regime VAD process that superimposes low frequency-high amplitude (LFHA ) and high frequency-low amplitude (HFLA) excitations to explore the possibility of gaining the benefits of both regimes and to allow adaptive control of the process through adjustment of the frequency/amplitude levels and/or the feedrate when drilling FRP/metal stacks. Outcome and impact: From simulation results, it is anticipated that the reduction in forces and temperature will exceed the individual benefits of each regime. As enabling technology, this development will overcome the challenges of robotized machining of stacked structures.
P4-Modeling and experimental investigation of fretting wear under random vibration
The main objective is to extend the `generalized fretting wear theory' proposed by the applicant to predict the damage under random excitation, and to develop a new experimental methodology for the standardization of fretting wear tests under random excitations. Outcome and impact: Preliminary test results showed that conventional sinusoidal excitation testing is non-conservative and could have significant safety and economic implications.