Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Discovery Grants Program - Individual

University of Windsor

$33,000.00

Establishing the Relation Between Properties, Microstructures, and Processing Parameters in Innovative Eccentric Friction Based Additive Manufacturing

EF 2024-25

Résumé
The application of additive manufacturing (AM) technologies continues to increase as they reduce manufacturing costs and eliminate/reduce the need for subsequent machining and assembly. The properties of AM parts involving the melting of materials are influenced by rapid solidification, which affects the microstructure. Despite extensive research, fundamental challenges persist, including solidification induced porosities, large thermal gradients, residual stresses, non-homogeneous grain structure, and hot cracking. Therefore, solid-state AM methods, including additive friction stir manufacturing, are being developed, which combine layer-by-layer AM technology with solid-state friction stir welding to address these issues. However, the technique is typically limited to the fabrication of large near-shaped parts and selective area reinforcement for large-scale applications. This research program aims to develop a novel eccentric friction-based AM technique equipped with heaters, allowing feed of small diameter wire materials for narrower deposition of AM layers with higher precision than conventional additive friction stir manufacturing. Therefore, the entire cross-section of the feed material slides against the substrate with a uniform linear velocity and contributes to frictional heating due to the eccentricity of the feed material, depositing AM layers with minimum defects and uniform microstructure and properties. The experimental setup will also be applied to an in-situ configuration incorporating a sapphire substrate and a high depth-of-focus microscope to observe and study the detailed deformation mechanisms in the deformation zone during AM deposition process. This research will systematically study the micromechanisms by which the material deforms and transfers to the substrate/layers and their effects on the microstructure, the porosity/defects, the mechanical properties, corrosion, and wear resistance of the deposited AM layers to establish the relationships between the process parameters and properties of AM Parts. In summary, the results will be used to reduce the cost and increase the efficiency and quality of the metal AM processes by improving the microstructure (through in-situ deformation of the deposited layer) and controlling the strain and strain rate (through texturing, rotational speed, eccentricity, temperature and feed rate of the FM). The program will train nine highly qualified personnel.
Programme
Discovery Grants Program - Individual
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
RGPIN-2022-04002
Name nom
Riahi, Reza
Department département
Mechanical, Automotive and Materials Engineering - Mechanical, Automotive and Materials Engineering
Organization id
37
Institution établissement
University of Windsor
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2024
Competition year année de concours
2022
Award amount
33000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
DISCOVERY RESEARCH
Group fr
RECHERCHE AXÉE SUR LA DÉCOUVERTE
Committee code
1511
Committee name en
Materials and Chemical Engineering
Committee name fr
Génie chimique et des matériaux
Area of application code
1208
Area of application group en
Advancement of knowledge
Area of application group fr
Avancement des connaissances
Area of application en
Materials sciences
Area of application fr
Sciences des matériaux
Research subject code
2002
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials processing
Research subject fr
Transformation des matériaux
Field of research list names en
Not available
Field of research list names fr
Non disponible
Socioeconomic objective list names en
Not available
Socioeconomic objective list names fr
Non disponible
Application title
Establishing the Relation Between Properties, Microstructures, and Processing Parameters in Innovative Eccentric Friction Based Additive Manufacturing
Keywords
tribology; friction; mechanical properties; aluminum; lightweight matals; additive manufacturing; corrosion; microstructure; wear; deformation
Application summary
The application of additive manufacturing (AM) technologies continues to increase as they reduce manufacturing costs and eliminate/reduce the need for subsequent machining and assembly. The properties of AM parts involving the melting of materials are influenced by rapid solidification, which affects the microstructure. Despite extensive research, fundamental challenges persist, including solidification induced porosities, large thermal gradients, residual stresses, non-homogeneous grain structure, and hot cracking. Therefore, solid-state AM methods, including additive friction stir manufacturing, are being developed, which combine layer-by-layer AM technology with solid-state friction stir welding to address these issues. However, the technique is typically limited to the fabrication of large near-shaped parts and selective area reinforcement for large-scale applications. This research program aims to develop a novel eccentric friction-based AM technique equipped with heaters, allowing feed of small diameter wire materials for narrower deposition of AM layers with higher precision than conventional additive friction stir manufacturing. Therefore, the entire cross-section of the feed material slides against the substrate with a uniform linear velocity and contributes to frictional heating due to the eccentricity of the feed material, depositing AM layers with minimum defects and uniform microstructure and properties. The experimental setup will also be applied to an in-situ configuration incorporating a sapphire substrate and a high depth-of-focus microscope to observe and study the detailed deformation mechanisms in the deformation zone during AM deposition process. This research will systematically study the micromechanisms by which the material deforms and transfers to the substrate/layers and their effects on the microstructure, the porosity/defects, the mechanical properties, corrosion, and wear resistance of the deposited AM layers to establish the relationships between the process parameters and properties of AM Parts. In summary, the results will be used to reduce the cost and increase the efficiency and quality of the metal AM processes by improving the microstructure (through in-situ deformation of the deposited layer) and controlling the strain and strain rate (through texturing, rotational speed, eccentricity, temperature and feed rate of the FM). The program will train nine highly qualified personnel.