Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Research Tools and Instruments - Category 1 (<$150,000)

University of Toronto

$81,177.00

Swirl-stabilized burner for premixed and spray combustion

EF 2011-12

Résumé
The requested equipment is a swirl-stabilized burner that will be capable of operating as a lean premixed combustor as well as a combustor employing a liquid fuel spray. Lean premixed combustors are highly susceptible to combustion instabilities, caused by the coupling between heat release fluctuations and combustor acoustics. Thermoacoustic instability represents one of the most challenging and least understood phenomena limiting the advancement of future gas turbine engines. In a very general sense, any disturbance of a compressible gas can be constituted of three types of waves: acoustic, vorticity, and entropy. The first objective of the research to be conducted using the requested burner is understand the physical processes that control the flame dynamics. The experiments targeted for the requested equipment will focus on the underpinnings of the basic mechanisms of thermoacoustic instability so that necessary tools could be developed to predict the conditions under which these instabilities occur. Renewable fuels produced from biomass are expected to constitute a greater portion of the fuel feedstock in the near to midterm. Increased production and use of biofuels will not only benefit the environment but also contribute to the energy security and economic growth. However, there are only a few studies on combustion performance of liquid biofuels for gas turbine applications. Thus, the second objective of the research to be conducted using the requested burner is to isolate the effects of fuel composition and fluid dynamics on emissions from different liquid conventional and biofuels in an atmospheric pressure burner replicating typical features of a gas turbine combustor. The requested burner will also lead to the generation of benchmark sets of data which will be used as a focus for guiding numerical studies of these combustion phenomena. In particular, new, efficient, and accurate combustion models are needed for predicting both the impact on emissions from existing gas turbine engine designs and for designing next-generation, low-emissions, high-fuel-efficient gas turbine engines burning alternative bio-fuels.
Programme
Research Tools and Instruments - Category 1 (<$150,000)
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
423373-2012
Name nom
Gulder, Omer
Department département
Aerospace Studies, Institute for
Organization id
31
Institution établissement
University of Toronto
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2011
Competition year année de concours
2012
Award amount
81177
Program id
EQPEQ
Program nane en
Research Tools and Instruments - Category 1 (<$150,000)
Program name fr
Outils et instruments de recherche - catégorie 1 (<150 000$)
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
703
Area of application group en
Transportation systems and services
Area of application group fr
Services et systèmes de transport
Area of application en
Aerospace
Area of application fr
Aérospatial
Research subject code
2110
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Combustion
Research subject fr
Combustion
Partie
1
Nb partie
1
Application title
Swirl-stabilized burner for premixed and spray combustion
Keyword
NSERC
Application summary
The requested equipment is a swirl-stabilized burner that will be capable of operating as a lean premixed combustor as well as a combustor employing a liquid fuel spray. Lean premixed combustors are highly susceptible to combustion instabilities, caused by the coupling between heat release fluctuations and combustor acoustics. Thermoacoustic instability represents one of the most challenging and least understood phenomena limiting the advancement of future gas turbine engines. In a very general sense, any disturbance of a compressible gas can be constituted of three types of waves: acoustic, vorticity, and entropy. The first objective of the research to be conducted using the requested burner is understand the physical processes that control the flame dynamics. The experiments targeted for the requested equipment will focus on the underpinnings of the basic mechanisms of thermoacoustic instability so that necessary tools could be developed to predict the conditions under which these instabilities occur. Renewable fuels produced from biomass are expected to constitute a greater portion of the fuel feedstock in the near to midterm. Increased production and use of biofuels will not only benefit the environment but also contribute to the energy security and economic growth. However, there are only a few studies on combustion performance of liquid biofuels for gas turbine applications. Thus, the second objective of the research to be conducted using the requested burner is to isolate the effects of fuel composition and fluid dynamics on emissions from different liquid conventional and biofuels in an atmospheric pressure burner replicating typical features of a gas turbine combustor. The requested burner will also lead to the generation of benchmark sets of data which will be used as a focus for guiding numerical studies of these combustion phenomena. In particular, new, efficient, and accurate combustion models are needed for predicting both the impact on emissions from existing gas turbine engine designs and for designing next-generation, low-emissions, high-fuel-efficient gas turbine engines burning alternative bio-fuels.